Date: Sat, 2 Dec 2017 02:13:02 +0100 (CET) From: "ingegneriaforense@alice.it" <ingegneriaforense@alice.it> To: freebsd-hackers@freebsd.org Cc: bsd-lists@BSDforge.com, hps@selasky.org Subject: Re: USB_ERR_IOERR: is usb controller electrically "broken" ? Message-ID: <16014c8a61a.ingegneriaforense@alice.it>
next in thread | raw e-mail | index | archive | help
------=_Part_38664_12050326.1512177182241
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 7bit
ORIGINAL QUESTION:
During the freebsd installation I receive some messages:
>> usbd_req_re_enumerate: addre=3, set address failed (USB_ERR_IOERROR, ignored)
>> usbd_setup_device_desc: getting device descriptor at addr 3 failed,
>> USB_ERR_IOERROR ugen0.3: <Unknown> at usbus0 (disconnected)
>> uhub_reattach_port: could not allocate new device
1. Please, can you tell me what this means ? Maybe is the USB controller electrically "broken" or is due to a no correct software configuration of its parameters ?
These messages are shown during the whole installation process overwriting my terminal and the sysinstall windows also.
Is a way to avoid this behaviour, configuring the freebsd installation ?
-----------------------------------------------------------------------------------------------------------------
Hello guys,
thanks for your reply.
I'm so sorry but the problem is very tedious to solve. I set off the verbose option in the freebsd boot menu; then I've checked the loader.conf file in BOOT/DEFOULT directory. It seems that the verbose options are set off in this file. I've attached a copy of it, taken from my boot CD.
Please, other tips are welcome.
Thanks very much.
vincenzo.
Forensic Consultant
Tribunale di Lecce
Studio: Strada di Garibaldi - Contrada Paradisi
73010 Lequile (LE)
cell: 339.7968555
skype: vincenzo.di_salvo
------=_Part_38664_12050326.1512177182241
Content-Type: application/octet-stream; name=LOADER.CONF
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment; filename=LOADER.CONF; size=26089
# This is loader.conf - a file full of useful variables that you can
# set to change the default load behavior of your system. You should
# not edit this file! Put any overrides into one of the
# loader_conf_files instead and you will be able to update these
# defaults later without spamming your local configuration information.
#
# All arguments must be in double quotes.
#
# $FreeBSD: stable/11/sys/boot/forth/loader.conf 322087 2017-08-05 09:40:56Z trasz $
##############################################################
### Basic configuration options ############################
##############################################################
exec="echo Loading /boot/defaults/loader.conf"
kernel="kernel" # /boot sub-directory containing kernel and modules
bootfile="kernel" # Kernel name (possibly absolute path)
kernel_options="" # Flags to be passed to the kernel
loader_conf_files="/boot/device.hints /boot/loader.conf /boot/loader.conf.local"
nextboot_conf="/boot/nextboot.conf"
nextboot_enable="NO"
verbose_loading="NO" # Set to YES for verbose loader output
##############################################################
### Splash screen configuration ############################
##############################################################
splash_bmp_load="NO" # Set this to YES for bmp splash screen!
splash_pcx_load="NO" # Set this to YES for pcx splash screen!
splash_txt_load="NO" # Set this to YES for TheDraw splash screen!
vesa_load="NO" # Set this to YES to load the vesa module
bitmap_load="NO" # Set this to YES if you want splash screen!
bitmap_name="splash.bmp" # Set this to the name of the file
bitmap_type="splash_image_data" # and place it on the module_path
##############################################################
### Random number generator configuration ##################
##############################################################
# See rc.conf(5). The entropy_boot_file config variable must agree with the
# settings below.
entropy_cache_load="YES" # Set this to NO to disable loading
# entropy at boot time
entropy_cache_name="/boot/entropy" # Set this to the name of the file
entropy_cache_type="/boot/entropy" # Required for the kernel to find
# the boot-time entropy cache. This
# must not change value even if the
# _name above does change!
##############################################################
### RAM Blacklist configuration ############################
##############################################################
ram_blacklist_load="NO" # Set this to YES to load a file
# containing a list of addresses to
# exclude from the running system.
ram_blacklist_name="/boot/blacklist.txt" # Set this to the name of the file
ram_blacklist_type="ram_blacklist" # Required for the kernel to find
# the blacklist module
##############################################################
### Initial memory disk settings ###########################
##############################################################
#mdroot_load="YES" # The "mdroot" prefix is arbitrary.
#mdroot_type="md_image" # Create md(4) disk at boot.
#mdroot_name="/boot/root.img" # Path to a file containing the image.
#rootdev="ufs:/dev/md0" # Set the root filesystem to md(4) device.
##############################################################
### Loader settings ########################################
##############################################################
#loader_delay="3" # Delay in seconds before loading anything.
# Default is unset and disabled (no delay).
#autoboot_delay="10" # Delay in seconds before autobooting,
# set to -1 if you don't want user to be
# allowed to interrupt autoboot process and
# escape to the loader prompt, set to
# "NO" to disable autobooting
#password="" # Prevent changes to boot options
#bootlock_password="" # Prevent booting (see check-password.4th(8))
#geom_eli_passphrase_prompt="NO" # Prompt for geli(8) passphrase to mount root
bootenv_autolist="YES" # Auto populate the list of ZFS Boot Environments
#beastie_disable="NO" # Turn the beastie boot menu on and off
#kernels="kernel kernel.old" # Kernels to display in the boot menu
#loader_logo="orbbw" # Desired logo: orbbw, orb, fbsdbw, beastiebw, beastie, none
#comconsole_speed="9600" # Set the current serial console speed
#console="vidconsole" # A comma separated list of console(s)
#currdev="disk1s1a" # Set the current device
module_path="/boot/modules" # Set the module search path
#prompt="\\${interpret}" # Set the command prompt
#root_disk_unit="0" # Force the root disk unit number
#rootdev="disk1s1a" # Set the root filesystem
#dumpdev="disk1s1b" # Set a dump device early in the boot process
#tftp.blksize="1428" # Set the RFC 2348 TFTP block size.
# If the TFTP server does not support RFC 2348,
# the block size is set to 512. If the value
# is out of range ( < 8 || > 9008 ) an error is
# returned.
#twiddle_divisor="1" # >1 means slow down the progress indicator.
##############################################################
### Kernel settings ########################################
##############################################################
# The following boot_ variables are enabled by setting them to any value.
# Their presence in the kernel environment (see kenv(1)) has the same
# effect as setting the given boot flag (see boot(8)).
#boot_askname="" # -a: Prompt the user for the name of the root device
#boot_cdrom="" # -C: Attempt to mount root file system from CD-ROM
#boot_ddb="" # -d: Instructs the kernel to start in the DDB debugger
#boot_dfltroot="" # -r: Use the statically configured root file system
#boot_gdb="" # -g: Selects gdb-remote mode for the kernel debugger
#boot_multicons="" # -D: Use multiple consoles
#boot_mute="" # -m: Mute the console
#boot_pause="" # -p: Pause after each line during device probing
#boot_serial="" # -h: Use serial console
#boot_single="" # -s: Start system in single-user mode
#boot_verbose="" # -v: Causes extra debugging information to be printed
#init_path="/sbin/init:/sbin/oinit:/sbin/init.bak:/rescue/init"
# Sets the list of init candidates
#init_shell="/bin/sh" # The shell binary used by init(8).
#init_script="" # Initial script to run by init(8) before chrooting.
#init_chroot="" # Directory for init(8) to chroot into.
##############################################################
### Kernel tunables ########################################
##############################################################
#hw.physmem="1G" # Limit physical memory. See loader(8)
#kern.dfldsiz="" # Set the initial data size limit
#kern.dflssiz="" # Set the initial stack size limit
#kern.hz="100" # Set the kernel interval timer rate
#kern.maxbcache="" # Set the max buffer cache KVA storage
#kern.maxdsiz="" # Set the max data size
#kern.maxfiles="" # Set the sys. wide open files limit
#kern.maxproc="" # Set the maximum # of processes
#kern.maxssiz="" # Set the max stack size
#kern.maxswzone="" # Set the max swmeta KVA storage
#kern.maxtsiz="" # Set the max text size
#kern.maxusers="32" # Set size of various static tables
#kern.msgbufsize="65536" # Set size of kernel message buffer
#kern.nbuf="" # Set the number of buffer headers
#kern.ncallout="" # Set the maximum # of timer events
#kern.ngroups="1023" # Set the maximum # of supplemental groups
#kern.sgrowsiz="" # Set the amount to grow stack
#kern.cam.boot_delay="10000" # Delay (in ms) of root mount for CAM bus
# registration, useful for USB sticks as root
#kern.cam.scsi_delay="2000" # Delay (in ms) before probing SCSI
#kern.ipc.maxsockets="" # Set the maximum number of sockets available
#kern.ipc.nmbclusters="" # Set the number of mbuf clusters
#kern.ipc.nsfbufs="" # Set the number of sendfile(2) bufs
#net.inet.tcp.tcbhashsize="" # Set the value of TCBHASHSIZE
#vfs.root.mountfrom="" # Specify root partition in a way the
# kernel understands
#vm.kmem_size="" # Sets the size of kernel memory (bytes)
#debug.kdb.break_to_debugger="0" # Allow console to break into debugger.
#debug.ktr.cpumask="0xf" # Bitmask of CPUs to enable KTR on
#debug.ktr.mask="0x1200" # Bitmask of KTR events to enable
#debug.ktr.verbose="1" # Enable console dump of KTR events
#net.graph.maxalloc="128" # Maximum number of queue items to allocate
##############################################################
### ATA modules ############################################
##############################################################
ataacard_load="NO" # ACARD
ataacerlabs_load="NO" # Acer Labs Inc. (ALI)
ataamd_load="NO" # American Micro Devices (AMD)
ataati_load="NO" # ATI
atacenatek_load="NO" # Cenatek
atacypress_load="NO" # Cypress
atacyrix_load="NO" # Cyrix
atahighpoint_load="NO" # HighPoint
ataintel_load="NO" # Intel
ataite_load="NO" # Integrated Technology Inc. (ITE)
atajmicron_load="NO" # JMicron
atamarvell_load="NO" # Marvell
atamicron_load="NO" # Micron
atanational_load="NO" # National
atanetcell_load="NO" # NetCell
atanvidia_load="NO" # nVidia
atapromise_load="NO" # Promise
ataserverworks_load="NO" # ServerWorks
atasiliconimage_load="NO" # Silicon Image Inc. (SiI) (formerly CMD)
atasis_load="NO" # Silicon Integrated Systems Corp.(SiS)
atavia_load="NO" # VIA Technologies Inc.
##############################################################
### Filesystem and related modules #########################
##############################################################
# Filesystems
cd9660_load="NO" # ISO 9660 filesystem
fdescfs_load="NO" # Filedescriptors filesystem
linprocfs_load="NO" # Linux compatibility process filesystem
linsysfs_load="NO" # Linux compatibility system filesystem
msdosfs_load="NO" # FAT-12/16/32
nfsclient_load="NO" # NFS client
nfsserver_load="NO" # NFS server
nullfs_load="NO" # Null filesystem
procfs_load="NO" # Process filesystem
unionfs_load="NO" # Union filesystem
zfs_load="NO" # ZFS
# Related stuff
geom_bde_load="NO" # Disk encryption driver (see gbde(4,8))
geom_ccd_load="NO" # Concatenated disk driver (see ccd(4),
# ccdconfig(8))
geom_concat_load="NO" # Concatenated disk driver (see gconcat(8))
geom_eli_load="NO" # Disk encryption driver (see geli(8))
geom_gate_load="NO" # Userland disk driver (see geom_gate(4),
# ggatec(8), ggated(8), ggatel(8))
geom_journal_load="NO" # Journaled filesystem driver (see gjournal(8))
geom_label_load="NO" # File system labels (see glabel(8))
geom_md_load="NO" # Memory disk driver (vnode/swap/malloc) (see
# md(4), mdconfig(8))
geom_mirror_load="NO" # RAID1 disk driver (see gmirror(8))
geom_mountver_load="NO" # Mount verification disk driver
geom_nop_load="NO" # Transparent disk driver (see gnop(8))
geom_raid3_load="NO" # RAID3 disk driver (see graid3(8))
geom_shsec_load="NO" # Shared secret disk driver (see gshsec(8))
geom_stripe_load="NO" # RAID0 disk driver (see gstripe(8))
geom_uzip_load="NO" # Compressed disk images driver (see mkuzip(8))
geom_vinum_load="NO" # Concatenated/mirror/raid driver (see vinum(4))
##############################################################
### FireWire modules #######################################
##############################################################
firewire_load="NO" # IEEE1394 High-performance Serial Bus
fwe_load="NO" # Ethernet emulation driver for FireWire
fwip_load="NO" # IP over FireWire driver
fwohci_load="NO" # OHCI FireWire chipset device driver
sbp_load="NO" # SBP-2 Mass Storage Devices driver
sbp_targ_load="NO" # SBP-2 Target mode
##############################################################
### Screen saver modules ###################################
##############################################################
# This is best done in rc.conf
screensave_load="NO" # Set to YES to load a screensaver module
screensave_name="green_saver" # Set to the name of the screensaver module
##############################################################
### Emulation modules ######################################
##############################################################
cloudabi_load="NO" # Platform independent CloudABI support
cloudabi64_load="NO" # 64-bit CloudABI executables support
ibcs2_load="NO" # IBCS2 (SCO) emulation
ibcs2_coff_load="NO"
linux_load="NO" # Linux emulation
svr4_load="NO" # SystemV R4 emulation
streams_load="NO" # System V streams module
##############################################################
### Networking modules #####################################
##############################################################
if_disc_load="NO" # Discard device
if_ef_load="NO" # pseudo-device providing support for multiple
# ethernet frame types
if_epair_load="NO" # Virtual b-t-b Ethernet-like interface pair
if_gif_load="NO" # generic tunnel interface
if_gre_load="NO" # encapsulating network device
if_stf_load="NO" # 6to4 tunnel interface
if_tap_load="NO" # Ethernet tunnel software network interface
if_tun_load="NO" # Tunnel driver (user process ppp)
if_vlan_load="NO" # IEEE 802.1Q VLAN network interface
ipfw_load="NO" # Firewall
pf_load="NO" # packet filter
##############################################################
### Networking drivers #####################################
##############################################################
bridgestp_load="NO" # if_bridge(4) support
miibus_load="NO" # miibus support, needed for some drivers
carp_load="NO" # carp(4) protocol
if_ae_load="NO" # Attansic/Atheros L2 FastEthernet
if_age_load="NO" # Attansic/Atheros L1 Gigabit Ethernet
if_alc_load="NO" # Atheros AR8131/AR8132 Ethernet
if_ale_load="NO" # Atheros AR8121/AR8113/AR8114 Ethernet
if_an_load="NO" # Aironet 4500/4800 802.11 wireless NICs
if_ath_load="NO" # Atheros IEEE 802.11 wireless NICs
if_aue_load="NO" # ADMtek AN986 Pegasus USB Ethernet
if_axe_load="NO" # ASIX Electronics AX88172 USB Ethernet
if_bce_load="NO" # Broadcom NetXtreme II Gigabit Ethernet
if_bfe_load="NO" # Broadcom BCM4401
if_bge_load="NO" # Broadcom BCM570x PCI Gigabit Ethernet
if_bnxt_load="NO" # Broadcom NetXtreme-C/NetXtreme-E
if_bridge_load="NO" # if_bridge(4) devices
if_bwi_load="NO" # Broadcom BCM53xx IEEE 802.11b/g wireness NICs
if_bwn_load="NO" # Broadcom BCM43xx IEEE 802.11 wireless NICs
if_bxe_load="NO" # Broadcom NetXtreme II 10Gb Ethernet
if_cas_load="NO" # Sun Cassini/Cassini+ and NS DP83065 Saturn
if_cm_load="NO" # SMC (90c26, 90c56, 90c66)
if_cs_load="NO" # Crystal Semiconductor CS8920
if_cue_load="NO" # CATC USB-EL1210A USB Ethernet
if_cxgb_load="NO" # Chelsio T3 10 Gigabit Ethernet
if_cxgbe_load="NO" # Chelsio T4/T5/T6 1/10/25/40/100 Gigabit Ethernet
if_dc_load="NO" # DEC/Intel 21143 and various workalikes
if_de_load="NO" # DEC DC21x4x Ethernet
if_ed_load="NO" # National Semiconductor DS8390/WD83C690
# Ethernet
if_em_load="NO" # Intel(R) PRO/1000 Gigabit Ethernet
if_en_load="NO" # Midway-based ATM interfaces
if_ep_load="NO" # 3Com Etherlink III (3c5x9)
if_et_load="NO" # Agere ET1310 10/100/Gigabit Ethernet
if_ex_load="NO" # Intel EtherExpress Pro/10 Ethernet
if_fatm_load="NO" # Fore PCA200E ATM
if_fe_load="NO" # Fujitsu MB86960A/MB86965A based Ethernet
# adapters
if_fxp_load="NO" # Intel EtherExpress PRO/100B (82557, 82558)
if_gem_load="NO" # Sun GEM/Sun ERI/Apple GMAC
if_hatm_load="NO" # Fore/Marconi HE155 and HE622
if_hme_load="NO" # Sun Microelectronics STP2002-STQ Ethernet
if_ie_load="NO" # Intel 82586
if_igb_load="NO" # Intel(R) PRO/1000 Gigabit Ethernet
if_ipw_load="NO" # Intel PRO/Wireless 2100 wireless
if_iwi_load="NO" # Intel PRO/Wireless 2200BG/2225BG/2915ABG
# wireless
if_iwn_load="NO" # Intel Wireless WiFi Link 802.11n wireless
if_ixgb_load="NO" # Intel PRO/10Gb Ethernet
if_ixgbe_load="NO" # Intel PRO/10Gb Ethernet PCI Express
if_ixl_load="NO" # Intel XL710 Ethernet 40Gb Base driver
if_ixlv_load="NO" # Intel XL710 Ethernet 40Gb VF driver
if_jme_load="NO" # JMicron JMC250 Gigabit/JMC260 Fast Ethernet
if_lagg_load="NO" # lagg(4) devices
if_le_load="NO" # AMD Am7900 LANCE and Am79C9xx PCnet
if_lge_load="NO" # Level 1 LXT1001 NetCellerator PCI Gigabit
# Ethernet
if_malo_load="NO" # Marvell Libertas 88W8335 802.11 wireless
# adapter
if_msk_load="NO" # Marvell/SysKonnect Yukon II Gigabit Ethernet
if_mxge_load="NO" # Myricom Myri10GE 10Gb Ethernet
if_my_load="NO" # Myson PCI Fast Ethernet
if_nfe_load="NO" # NVIDIA nForce MCP Networking Adapter
if_nge_load="NO" # National Semiconductor PCI Gigabit Ethernet
if_nxge_load="NO" # Neterion Xframe 10Gb Ethernet
if_patm_load="NO" # IDT77252 ATM
if_pcn_load="NO" # AMD PCnet PCI
if_ral_load="NO" # Ralink Technology wireless
if_re_load="NO" # RealTek 8139C+/8169/8169S/8110S
if_rl_load="NO" # RealTek 8129/8139
if_rue_load="NO" # RealTek RTL8150 USB to Fast Ethernet
if_rum_load="NO" # Ralink Technology USB 802.11a/b/g wireless
if_run_load="NO" # Ralink Technology USB 802.11a/g/n wireless
if_sbni_load="NO" # Granch SBNI12 leased line adapters
if_sf_load="NO" # Adaptec Duralink PCI (AIC-6915 "starfire")
if_sge_load="NO" # Silicon Integrated Systems SiS 190/191
if_sis_load="NO" # Silicon Integrated Systems SiS 900/7016
if_sk_load="NO" # SysKonnect SK-984x series PCI Gigabit Ethernet
if_sn_load="NO" # SMC 91Cxx
if_ste_load="NO" # Sundance Technologies ST201 Fast Ethernet
if_stge_load="NO" # Sundance/Tamarack TC9021 Gigabit Ethernet
if_ti_load="NO" # Alteon Networks Tigon 1 and Tigon 2
if_tl_load="NO" # Texas Instruments TNETE100 ("ThunderLAN")
if_tx_load="NO" # SMC 83c17x Fast Ethernet
if_txp_load="NO" # 3Com 3XP Typhoon/Sidewinder (3CR990)
if_vge_load="NO" # VIA VT6122 PCI Gigabit Ethernet
if_vte_load="NO" # DM&P Vortex86 RDC R6040 Fast Ethernet
if_uath_load="NO" # Atheros USB wireless for AR5005UG & AR5005UX
if_udav_load="NO" # Davicom DM9601 USB Ethernet
if_upgt_load="NO" # Conexant/Intersil PrismGT USB wireless
if_ural_load="NO" # Ralink Technology USB wireless
if_urtw_load="NO" # Realtek 8187L USB wireless
if_vr_load="NO" # VIA Rhine I and Rhine II
if_vx_load="NO" # 3Com 3C590 family
if_wb_load="NO" # Winbond W89C840F
if_wi_load="NO" # WaveLAN/IEEE 802.11 wireless NICs
if_wpi_load="NO" # Intel 3945ABG Wireless LAN IEEE 802.11
if_xe_load="NO" # Xircom CreditCard PCMCIA
if_xl_load="NO" # 3Com Etherlink XL (3c900, 3c905, 3c905B)
sfxge_load="NO" # Solarflare 10Gb Ethernet adapter driver
utopia_load="NO" # ATM PHY driver
##############################################################
### Netgraph modules #######################################
##############################################################
ng_UI_load="NO" # UI netgraph node type
ng_async_load="NO" # asynchronous framing netgraph node type
ng_bpf_load="NO" # Berkeley packet filter netgraph node type
ng_bridge_load="NO" # Ethernet bridging netgraph node type
ng_cisco_load="NO" # Cisco HDLC protocol netgraph node type
ng_echo_load="NO" # Netgraph echo node type
ng_eiface_load="NO" # generic Ethernet interface netgraph node type
ng_etf_load="NO" # Ethertype filtering netgraph node type
ng_ether_load="NO" # Ethernet netgraph node type
ng_frame_relay_load="NO" # frame relay netgraph node type
ng_gif_load="NO" # generic tunnel interface netgraph node type
ng_gif_demux_load="NO" # demultiplexer for packets from ng_gif(4) nodes
ng_hole_load="NO" # Netgraph discard node type
ng_hub_load="NO" # packet distribution netgraph node type
ng_iface_load="NO" # interface Netgraph node type
ng_ip_input_load="NO" # netgraph IP input node type
ng_ksocket_load="NO" # kernel socket netgraph node type
ng_l2tp_load="NO" # L2TP protocol netgraph node type
ng_lmi_load="NO" # frame relay LMI protocol netgraph node type
ng_mppc_load="NO" # Microsoft MPPC/MPPE compression and
# encryption netgraph node type
ng_netflow_load="NO" # Cisco's NetFlow netgraph node type
ng_one2many_load="NO" # packet multiplexing netgraph node type
ng_ppp_load="NO" # PPP protocol netgraph node type
ng_pppoe_load="NO" # RFC 2516 PPPOE protocol netgraph node type
ng_pptpgre_load="NO" # PPTP GRE protocol netgraph node type
ng_rfc1490_load="NO" # RFC 1490 netgraph node type
ng_socket_load="NO" # Netgraph socket node type
ng_split_load="NO" # netgraph node to separate incoming and
# outgoing flows
ng_sppp_load="NO" # sppp netgraph node type
ng_tee_load="NO" # Netgraph ``tee'' node type
ng_tty_load="NO" # Netgraph node type that is also a line
# discipline
ng_vjc_load="NO" # Van Jacobsen compression netgraph node type
ng_vlan_load="NO" # IEEE 802.1Q VLAN tagging netgraph node type
##############################################################
### Sound modules ##########################################
##############################################################
sound_load="NO" # Digital sound subsystem
snd_ad1816_load="NO" # ad1816
snd_als4000_load="NO" # als4000
snd_atiixp_load="NO" # atiixp
snd_cmi_load="NO" # cmi
snd_cs4281_load="NO" # cs4281
snd_csa_load="NO" # csa
snd_ds1_load="NO" # ds1
snd_emu10k1_load="NO" # Creative Sound Blaster Live
snd_emu10kx_load="NO" # Creative SoundBlaster Live! and Audigy
snd_envy24_load="NO" # VIA Envy24
snd_envy24ht_load="NO" # VIA Envy24HT
snd_es137x_load="NO" # es137x
snd_ess_load="NO" # ess
snd_fm801_load="NO" # fm801
snd_hda_load="NO" # Intel High Definition Audio (Controller)
snd_ich_load="NO" # Intel ICH
snd_maestro_load="NO" # Maestro
snd_maestro3_load="NO" # Maestro3
snd_mss_load="NO" # Mss
snd_neomagic_load="NO" # Neomagic
snd_sb16_load="NO" # Sound Blaster 16
snd_sb8_load="NO" # Sound Blaster Pro
snd_sbc_load="NO" # Sbc
snd_solo_load="NO" # Solo
snd_spicds_load="NO" # SPI codecs
snd_t4dwave_load="NO" # t4dwave
snd_via8233_load="NO" # via8233
snd_via82c686_load="NO" # via82c686
snd_vibes_load="NO" # vibes
snd_driver_load="NO" # All sound drivers
##############################################################
### USB modules ############################################
##############################################################
usb_load="NO" # USB subsystem
udbp_load="NO" # USB double bulk pipe host 2 host cables
ugen_load="NO" # USB generic device, if all else fails ...
ucycom_load="NO" # Cyprus USB serial adapters
ufm_load="NO" # Fm Radio
uhid_load="NO" # Human Interface Devices
ukbd_load="NO" # Keyboard
ulpt_load="NO" # Printer
ums_load="NO" # Mouse
umass_load="NO" # Mass Storage Devices
umct_load="NO" # Magic Control Technology USB-RS232
umodem_load="NO" # Modems
uplcom_load="NO" # Prolific USB serial adapters
urio_load="NO" # Rio MP3 players
uvisor_load="NO" # PalmOS based PDAs
if_aue_load="NO" # ADMtek USB ethernet
if_axe_load="NO" # ASIX Electronics AX88172 USB ethernet
if_cdce_load="NO" # Ethernet over USB (CDC)
if_cue_load="NO" # CATC USB ethernet
if_kue_load="NO" # Kawasaki LSI USB ethernet
if_rae_load="NO" # Realtek RTL8150 USB adapter.
if_rum_load="NO" # Ralink USB 802.11 wireless adapter
if_uath_load="NO" # Atheros AR5523 wireless adapter
if_run_load="NO" # Ralink USB 802.11 wireless adapter
if_ural_load="NO" # Ralink RT2500USB 802.11 wireless adapter
if_zyd_load="NO" # ZyDAS ZD1211(B) USB 802.11 wireless adapter
snd_uaudio_load="NO" # USB audio
##############################################################
### Other modules ##########################################
##############################################################
aio_load="NO" # Asynchronous I/O
bktr_load="NO" # Brooktree Bt848/Bt878 TV/Video Capture Card
ispfw_load="NO" # Qlogic ISP Firmware
agp_load="NO" # agp module
accf_data_load="NO" # Wait for data accept filter
accf_dns_load="NO" # Wait for full DNS request accept filter
accf_http_load="NO" # Wait for full HTTP request accept filter
ppi_load="NO" # Interface to ppbus parallel 'geek' port
pps_load="NO" # Pulse per second devices
puc_load="NO" # PCI "Universal" Communications driver
random_load="NO" # Random device
speaker_load="NO" # AT speaker module
coretemp_load="NO" # Intel Core CPU temperature monitor
vkbd_load="NO" # Virtual AT keyboard interface
vpd_load="NO" # Vital Product Data kernel interface
vpo_load="NO" # Parallel to SCSI interface driver
amdtemp_load="NO" # AMD K8/K10/K11 temperature monitor
tpm_load="NO" # Trusted Platform Module
wbwd_load="NO" # Winbond watchdog
##############################################################
### ACPI settings ##########################################
##############################################################
acpi_dsdt_load="NO" # DSDT Overriding
acpi_dsdt_type="acpi_dsdt" # Don't change this
acpi_dsdt_name="/boot/acpi_dsdt.aml"
# Override DSDT in BIOS by this file
acpi_video_load="NO" # Load the ACPI video extension driver
##############################################################
### TrustedBSD MAC settings ################################
##############################################################
mac_biba_load="NO" # Biba MAC policy
mac_bsdextended_load="NO" # BSD/extended MAC policy
mac_ifoff="NO" # Interface silencing policy
mac_mls_load="NO" # MLS MAC policy
mac_none_load="NO" # Null MAC policy
mac_partition_load="NO" # Partition MAC policy
mac_seeotheruids_load="NO" # UID visbility MAC policy
##############################################################
### Module loading syntax example ##########################
##############################################################
#module_load="YES" # loads module "module"
#module_name="realname" # uses "realname" instead of "module"
#module_type="type" # passes "-t type" to load
#module_flags="flags" # passes "flags" to the module
#module_before="cmd" # executes "cmd" before loading the module
#module_after="cmd" # executes "cmd" after loading the module
#module_error="cmd" # executes "cmd" if load fails
------=_Part_38664_12050326.1512177182241--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?16014c8a61a.ingegneriaforense>