Date: Tue, 19 Oct 2010 13:02:20 +0000 From: Thomas Steen Rasmussen <thomas@gibfest.dk> To: freebsd-acpi@freebsd.org Subject: FitPC2i hang on reboot Message-ID: <4CBD96DC.3060704@gibfest.dk>
next in thread | raw e-mail | index | archive | help
Hello acpi experts, I bought a FitPC2i, a small Atom based PC with an Intel US15W chipset. There is a PDF with the details of the hardware here: http://www.compulab.co.il/fitpc2i/download/fitpc2i-sb-man.pdf I installed the 201010 8-STABLE snapshot on it. The machine gets stuck when rebooting ("shutdown -r now" or "reboot"). The machine shuts down normally when I use "shutdown -p now", it is only rebooting that doesn't work. The machine hangs after the normal shutdown sequence after the message "cpu_reset: stopping other CPUs". I have to hold the power button for 5-6 seconds to turn it off, and then turn it on again. I am thinking this is an ACPI issue ? http://www.freebsd.org/doc/handbook/acpi-debug.html states to provide the following information from the system, but I can provide whatever needed, (including ssh access if neccesary): ------------------- Verbose dmesg begin -------------------------------- Copyright (c) 1992-2010 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.1-STABLE-201010 #0: Thu Oct 7 14:52:21 UTC 2010 root@almeida.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386 Preloaded elf kernel "/boot/kernel/kernel" at 0xc0fe2000. Preloaded elf module "/boot/kernel/if_run.ko" at 0xc0fe21ec. Preloaded elf module "/boot/kernel/runfw.ko" at 0xc0fe2298. Preloaded elf module "/boot/kernel/ichwd.ko" at 0xc0fe2344. Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1595999628 Hz CPU: Intel(R) Atom(TM) CPU Z530 @ 1.60GHz (1596.00-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x106c2 Family = 6 Model = 1c Stepping = 2 Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x40c3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,xTPR,PDCM,MOVBE> AMD Features=0x100000<NX> AMD Features2=0x1<LAHF> TSC: P-state invariant 1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size L2 cache: 512 kbytes, 16-way associative, 64 bytes/line real memory = 2147483648 (2048 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000008efff, 581632 bytes (142 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001026000 - 0x000000007d284fff, 2082861056 bytes (508511 pages) avail memory = 2081464320 (1985 MB) Table 'FACP' at 0x7f6bbdb0 Table 'HPET' at 0x7f6bbea4 Table 'MCFG' at 0x7f6bbedc Table 'TCPA' at 0x7f6bbf18 Table 'TMOR' at 0x7f6bbf4a Table 'APIC' at 0x7f6bbf70 APIC: Found table at 0x7f6bbf70 MP Configuration Table version 1.4 found at 0xc0090471 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 0: enabled SMP: Added CPU 0 (AP) MADT: Found CPU APIC ID 1 ACPI ID 1: enabled SMP: Added CPU 1 (AP) ACPI APIC Table: <PTLTD APIC > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 1 core(s) x 2 HTT threads cpu0 (BSP): APIC ID: 0 cpu1 (AP/HT): APIC ID: 1 x86bios: IVT 0x000000-0x0004ff at 0xc0000000 x86bios: SSEG 0x010000-0x01ffff at 0xc519d000 x86bios: EBDA 0x090000-0x09ffff at 0xc0090000 x86bios: ROM 0x0a0000-0x0effff at 0xc00a0000 APIC: CPU 0 has ACPI ID 0 APIC: CPU 1 has ACPI ID 1 bios32: Found BIOS32 Service Directory header at 0xc00f8580 bios32: Entry = 0xfdc70 (c00fdc70) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfdc70+0x21f pnpbios: Found PnP BIOS data at 0xc00f8620 pnpbios: Entry = f0000:c4fd Rev = 1.0 Other BIOS signatures found: ULE: setup cpu 0 ULE: setup cpu 1 ACPI: RSDP 0xf85d0 00024 (v02 PTLTD ) ACPI: XSDT 0x7f6b711d 00064 (v01 PTLTD ? XSDT 06040000 LTP 00000000) ACPI: FACP 0x7f6bbdb0 000F4 (v03 INTEL POULSBO 06040000 INTC 00000032) ACPI: DSDT 0x7f6b803a 03CF2 (v01 INTEL POULSBO 06040000 INTL 20050624) ACPI: FACS 0x7f6befc0 00040 ACPI: HPET 0x7f6bbea4 00038 (v01 INTEL POULSBO 06040000 INTC 00000032) ACPI: MCFG 0x7f6bbedc 0003C (v01 INTEL POULSBO 06040000 INTC 00000032) ACPI: TCPA 0x7f6bbf18 00032 (v01 PTLTD CALISTGA 06040000 PTL 00000001) ACPI: TMOR 0x7f6bbf4a 00026 (v01 PTLTD 06040000 PTL 00000003) ACPI: APIC 0x7f6bbf70 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000) ACPI: BOOT 0x7f6bbfd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) ACPI: SSDT 0x7f6b7181 004DC (v02 PmRef CpuPm 00003000 INTL 20050624) MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high lapic1: Routing NMI -> LINT1 lapic1: LINT1 trigger: edge lapic1: LINT1 polarity: high MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0 <Version 2.0> irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 CPU0: local APIC error 0x80 cmci: 0x00000000 wlan: <802.11 Link Layer> firmware: 'runfw' version 1: 8192 bytes loaded at 0xc0fda5dc null: <null device, zero device> random: <entropy source, Software, Yarrow> nfslock: pseudo-device io: <I/O> kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> Pentium Pro MTRR support enabled ichwd module loaded hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 npx0: INT 16 interface acpi0: <PTLTD XSDT> on motherboard PCIe: Memory Mapped configuration base @ 0xe0000000 pcibios: BIOS version 3.00 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] ACPI Error: Could not enable PowerButton event (20100331/evxfevnt-298) ACPI Warning: Could not enable fixed event 0x2 (20100331/evxface-235) acpi0: Power Button (fixed) acpi0: wakeup code va 0xc5197000 pa 0x1000 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.GFX0.IGDP -> bus 0 dev 2 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.LPCB.LPC0 -> bus 0 dev 31 func 0 ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 0/41 1/1 -> 9 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 cpu0: <ACPI CPU> on acpi0 ACPI: SSDT 0x7f6b7d21 00245 (v02 PmRef Cpu0Ist 00003000 INTL 20050624) ACPI: SSDT 0x7f6b765d 0063F (v02 PmRef Cpu0Cst 00003001 INTL 20050624) cpu1: <ACPI CPU> on acpi0 ACPI: SSDT 0x7f6b7f66 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624) ACPI: SSDT 0x7f6b7c9c 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624) acpi_ec0: <Embedded Controller: GPE 0xd> port 0x62,0x66 on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 7 N 0 1 3 4 5 6 7 10 12 14 15 Validation 0 7 N 0 1 3 4 5 6 7 10 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 4 N 0 1 3 4 5 6 7 11 12 14 15 Validation 0 4 N 0 1 3 4 5 6 7 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 3 N 0 1 3 4 5 6 7 10 12 14 15 Validation 0 3 N 0 1 3 4 5 6 7 10 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 1 3 4 5 6 7 11 12 14 15 Validation 0 5 N 0 1 3 4 5 6 7 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 1 3 4 5 6 7 10 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 10 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 1 3 4 5 6 7 11 12 14 15 Validation 0 11 N 0 1 3 4 5 6 7 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 1 3 4 5 6 7 10 12 14 15 Validation 0 10 N 0 1 3 4 5 6 7 10 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 1 3 4 5 6 7 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 acpi_hpet0: vend: 0x8086 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route 64-bit Timecounter "HPET" frequency 14318180 Hz quality 900 acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 battery1: <ACPI Control Method Battery> on acpi0 battery2: <ACPI Control Method Battery> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x8086, dev=0x8100, revid=0x07 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x8108, revid=0x07 domain=0, bus=0, slot=2, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=7 powerspec 2 supports D0 D3 current D0 MSI supports 1 message map[10]: type Memory, range 32, base 0xd8080000, size 19, enabled map[14]: type I/O Port, range 32, base 0x1800, size 3, enabled map[18]: type Memory, range 32, base 0xd0000000, size 27, enabled map[1c]: type Memory, range 32, base 0xd8000000, size 17, enabled pcib0: matched entry for 0.2.INTA pcib0: slot 2 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x8110, revid=0x07 domain=0, bus=0, slot=28, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=a, irq=4 powerspec 2 supports D0 D3 current D0 pcib0: matched entry for 0.28.INTA pcib0: slot 28 INTA hardwired to IRQ 17 found-> vendor=0x8086, dev=0x8112, revid=0x07 domain=0, bus=0, slot=28, func=1 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=b, irq=7 powerspec 2 supports D0 D3 current D0 pcib0: matched entry for 0.28.INTB pcib0: slot 28 INTB hardwired to IRQ 16 found-> vendor=0x8086, dev=0x8114, revid=0x07 domain=0, bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0008, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[20]: type I/O Port, range 32, base 0x1820, size 5, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 23 unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1820 found-> vendor=0x8086, dev=0x8115, revid=0x07 domain=0, bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 map[20]: type I/O Port, range 32, base 0x1840, size 5, enabled pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 19 unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1840 found-> vendor=0x8086, dev=0x8116, revid=0x07 domain=0, bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=3 map[20]: type I/O Port, range 32, base 0x1860, size 5, enabled pcib0: matched entry for 0.29.INTC pcib0: slot 29 INTC hardwired to IRQ 18 unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1860 found-> vendor=0x8086, dev=0x8117, revid=0x07 domain=0, bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xd8020000, size 10, enabled pcib0: matched entry for 0.29.INTD pcib0: slot 29 INTD hardwired to IRQ 21 unknown: Reserved 0x400 bytes for rid 0x10 type 3 at 0xd8020000 found-> vendor=0x8086, dev=0x811c, revid=0x07 domain=0, bus=0, slot=30, func=0 class=08-05-01, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[10]: type Memory, range 32, base 0xd8020400, size 8, enabled pcib0: matched entry for 0.30.INTA pcib0: slot 30 INTA hardwired to IRQ 22 found-> vendor=0x8086, dev=0x811d, revid=0x07 domain=0, bus=0, slot=30, func=1 class=08-05-01, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[10]: type Memory, range 32, base 0xd8020800, size 8, enabled pcib0: matched entry for 0.30.INTB pcib0: slot 30 INTB hardwired to IRQ 20 found-> vendor=0x8086, dev=0x811e, revid=0x07 domain=0, bus=0, slot=30, func=2 class=08-05-01, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=3 map[10]: type Memory, range 32, base 0xd8020c00, size 8, enabled pcib0: matched entry for 0.30.INTC pcib0: slot 30 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x8119, revid=0x07 domain=0, bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0003, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x811a, revid=0x07 domain=0, bus=0, slot=31, func=1 class=01-01-80, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type I/O Port, range 32, base 0x1810, size 4, enabled vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0xd8080000-0xd80fffff,0xd0000000-0xd7ffffff,0xd8000000-0xd801ffff irq 16 at device 2.0 on pci0 pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 pcib1: domain 0 pcib1: secondary bus 2 pcib1: subordinate bus 2 pcib1: I/O decode 0x2000-0x2fff pcib1: memory decode 0xd8100000-0xd81fffff pcib1: prefetched decode 0xd8500000-0xd85fffff pci2: <ACPI PCI bus> on pcib1 pci2: domain=0, physical bus=2 found-> vendor=0x10ec, dev=0x8168, revid=0x02 domain=0, bus=2, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=7 powerspec 3 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit MSI-X supports 2 messages in map 0x20 map[10]: type I/O Port, range 32, base 0x2000, size 8, enabled pcib1: requested I/O range 0x2000-0x20ff: in range map[18]: type Memory, range 64, base 0xd8100000, size 12, enabled pcib1: requested memory range 0xd8100000-0xd8100fff: good map[20]: type Prefetchable Memory, range 64, base 0xd8500000, size 16, enabled pcib1: requested memory range 0xd8500000-0xd850ffff: good pcib1: matched entry for 2.0.INTA pcib1: slot 0 INTA hardwired to IRQ 16 re0: <RealTek 8168/8111 B/C/CP/D/DP/E PCIe Gigabit Ethernet> port 0x2000-0x20ff mem 0xd8100000-0xd8100fff,0xd8500000-0xd850ffff irq 16 at device 0.0 on pci2 re0: Reserved 0x1000 bytes for rid 0x18 type 3 at 0xd8100000 re0: MSI count : 1 re0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 256 to local APIC 0 vector 49 re0: using IRQ 256 for MSI re0: Using 1 MSI messages re0: Chip rev. 0x3c000000 re0: MAC rev. 0x00400000 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto re0: bpf attached re0: Ethernet address: 00:01:c0:08:25:1f re0: [MPSAFE] re0: [FILTER] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0 pcib2: domain 0 pcib2: secondary bus 3 pcib2: subordinate bus 3 pcib2: I/O decode 0x3000-0x3fff pcib2: memory decode 0xd8200000-0xd82fffff pcib2: prefetched decode 0xd8600000-0xd86fffff pci3: <ACPI PCI bus> on pcib2 pci3: domain=0, physical bus=3 found-> vendor=0x10ec, dev=0x8168, revid=0x02 domain=0, bus=3, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=4 powerspec 3 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit MSI-X supports 2 messages in map 0x20 map[10]: type I/O Port, range 32, base 0x3000, size 8, enabled pcib2: requested I/O range 0x3000-0x30ff: in range map[18]: type Memory, range 64, base 0xd8200000, size 12, enabled pcib2: requested memory range 0xd8200000-0xd8200fff: good map[20]: type Prefetchable Memory, range 64, base 0xd8600000, size 16, enabled pcib2: requested memory range 0xd8600000-0xd860ffff: good pcib2: matched entry for 3.0.INTA pcib2: slot 0 INTA hardwired to IRQ 17 re1: <RealTek 8168/8111 B/C/CP/D/DP/E PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0xd8200000-0xd8200fff,0xd8600000-0xd860ffff irq 17 at device 0.0 on pci3 re1: Reserved 0x1000 bytes for rid 0x18 type 3 at 0xd8200000 re1: MSI count : 1 re1: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 257 to local APIC 0 vector 50 re1: using IRQ 257 for MSI re1: Using 1 MSI messages re1: Chip rev. 0x3c000000 re1: MAC rev. 0x00400000 miibus1: <MII bus> on re1 rgephy1: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus1 rgephy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto re1: bpf attached re1: Ethernet address: 00:01:c0:08:25:20 re1: [MPSAFE] re1: [FILTER] uhci0: <UHCI (generic) USB controller> port 0x1820-0x183f irq 23 at device 29.0 on pci0 ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 51 uhci0: [MPSAFE] uhci0: [ITHREAD] uhci0: LegSup = 0x0000 usbus0: <UHCI (generic) USB controller> on uhci0 uhci1: <UHCI (generic) USB controller> port 0x1840-0x185f irq 19 at device 29.1 on pci0 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 52 uhci1: [MPSAFE] uhci1: [ITHREAD] uhci1: LegSup = 0x0000 usbus1: <UHCI (generic) USB controller> on uhci1 uhci2: <UHCI (generic) USB controller> port 0x1860-0x187f irq 18 at device 29.2 on pci0 ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 53 uhci2: [MPSAFE] uhci2: [ITHREAD] uhci2: LegSup = 0x0000 usbus2: <UHCI (generic) USB controller> on uhci2 ehci0: <EHCI (generic) USB 2.0 controller> mem 0xd8020000-0xd80203ff irq 21 at device 29.7 on pci0 ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 54 ehci0: [MPSAFE] ehci0: [ITHREAD] usbus3: EHCI version 1.0 usbus3: <EHCI (generic) USB 2.0 controller> on ehci0 pci0: <base peripheral, SD host controller> at device 30.0 (no driver attached) pci0: <base peripheral, SD host controller> at device 30.1 (no driver attached) pci0: <base peripheral, SD host controller> at device 30.2 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel SCH UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1810-0x181f at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1810 ata0: <ATA channel 0> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1 ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 55 ata0: [MPSAFE] ata0: [ITHREAD] acpi_tz0: <Thermal Zone> on acpi0 acpi_tz1: <Thermal Zone> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock (resolution 1000000us) uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 56 uart0: [FILTER] uart0: fast interrupt unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff ex_isa_identify() pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete isa_probe_children: disabling PnP devices pmtimer0 on isa0 ata: ata0 already exists; skipping it atrtc: atrtc0 already exists; skipping it sc: sc0 already exists; skipping it uart: uart0 already exists; skipping it isa_probe_children: probing non-PnP devices orm0: <ISA Option ROMs> at iomem 0xce800-0xcf7ff,0xcf800-0xd07ff,0xe0000-0xe17ff pnpid ORM0000 on isa0 atkbd: the current kbd controller command byte 0067 atkbd: keyboard ID 0x41ab (2) sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ata1 failed to probe at port 0x170 irq 15 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 57 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: current command byte:0067 psm0: failed to reset the aux device. fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 ppc0: parallel port not found. ppc0: <Parallel port> failed to probe at irq 7 on isa0 uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0 isa_probe_children: probing PnP devices est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 p4tcc1: <CPU Frequency Thermal Control> on cpu1 Device configuration finished. procfs registered lapic: Divisor 2, Frequency 66500002 Hz Timecounter "TSC" frequency 1595999628 Hz quality -100 Timecounters tick every 1.000 msec vlan: initialized, using hash tables with chaining lo0: bpf attached hptrr: no controller detected. ata0: Identifying devices: 00000001 ata0: New devices: 00000001 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 480Mbps High Speed USB v2.0 ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad0: DMA limited to UDMA33, device found non-ATA66 cable ad0: setting UDMA33 ad0: 30533MB <OCZ-VERTEX v1.10 1370> at ata0-master UDMA33 ad0: 62533296 sectors [62037C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad0 acpi_acad0: acline initialization startad0: Intel check1 failed ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1: <Intel> at usbus3 uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times battery0: battery initialization start battery1: battery initialization start battery2: battery initialization start ad0: Adaptec check1 failed ad0: LSI (v3) check1 failed ad0: LSI (v2) check1 failed ad0: FreeBSD check1 failed ATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 cmci: 0x00000000 CPU1: local APIC error 0x80 Root mount waiting for: usbus3 usbus2 usbus1 usbus0 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered Root mount waiting for: usbus3 Root mount waiting for: usbus3 Root mount waiting for: usbus3 uhub3: 8 ports with 8 removable, self powered ugen3.2: <Ralink> at usbus3 run0: <1.0> on usbus3 Root mount waiting for: usbus3 run0: MAC/BBP RT3070 (rev 0x0201), RF RT3020 (MIMO 1T1R), address 00:0d:f0:8d:4d:23 run0: firmware RT2870 loaded run0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps run0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps Trying to mount root from ufs:/dev/ad0s1a ct_to_ts([2010-10-19 14:33:27]) = 1287498807.000000000 start_init: trying /sbin/init lagg0: bpf attached lagg0.20: bpf attached lagg0.30: bpf attached lagg0.100: bpf attached lagg0.200: bpf attached lagg0.255: bpf attached ------------------- dmesg end -------------------------------- sysctl hw.acpi. output: hw.acpi.supported_sleep_state: S3 S4 S5 hw.acpi.power_button_state: S5 hw.acpi.sleep_button_state: S3 hw.acpi.lid_switch_state: NONE hw.acpi.standby_state: NONE hw.acpi.suspend_state: S3 hw.acpi.sleep_delay: 1 hw.acpi.s4bios: 0 hw.acpi.verbose: 1 hw.acpi.disable_on_reboot: 0 hw.acpi.handle_reboot: 0 hw.acpi.reset_video: 0 hw.acpi.cpu.cx_lowest: C1 hw.acpi.acline: 1 hw.acpi.battery.life: -1 hw.acpi.battery.time: -1 hw.acpi.battery.state: 7 hw.acpi.battery.units: 3 hw.acpi.battery.info_expire: 5 hw.acpi.thermal.min_runtime: 0 hw.acpi.thermal.polling_rate: 10 hw.acpi.thermal.user_override: 0 hw.acpi.thermal.tz0.temperature: 0.0C hw.acpi.thermal.tz0.active: -1 hw.acpi.thermal.tz0.passive_cooling: 0 hw.acpi.thermal.tz0.thermal_flags: 0 hw.acpi.thermal.tz0._PSV: -1 hw.acpi.thermal.tz0._HOT: -1 hw.acpi.thermal.tz0._CRT: 127.0C hw.acpi.thermal.tz0._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 hw.acpi.thermal.tz0._TC1: -1 hw.acpi.thermal.tz0._TC2: -1 hw.acpi.thermal.tz0._TSP: -1 hw.acpi.thermal.tz1.temperature: 0.0C hw.acpi.thermal.tz1.active: -1 hw.acpi.thermal.tz1.passive_cooling: 1 hw.acpi.thermal.tz1.thermal_flags: 0 hw.acpi.thermal.tz1._PSV: 95.0C hw.acpi.thermal.tz1._HOT: -1 hw.acpi.thermal.tz1._CRT: 95.0C hw.acpi.thermal.tz1._ACx: 55.0C -1 -1 -1 -1 -1 -1 -1 -1 -1 hw.acpi.thermal.tz1._TC1: 0 hw.acpi.thermal.tz1._TC2: 10 hw.acpi.thermal.tz1._TSP: 2 acpidump -dt ASL file can be downloaded at: http://www.gibfest.dk/tykling-fitpc2i.asl Please let me know if you want me to create a PR for this problem. Best regards and thank you, Thomas Steen Rasmussen ps. the ichwd module you can see being loaded in there is me trying to workaround this issue by playing with the hardware watchdog, but I don't think this chipset is supported by ichwd.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4CBD96DC.3060704>