Date: Tue, 2 Aug 2011 01:03:36 +1000 From: richo <richo@psych0tik.net> To: Adrian Chadd <adrian@freebsd.org> Cc: freebsd-wireless@freebsd.org Subject: Re: Ath works as module, not inkernel Message-ID: <20110801150242.GA14650@vesper.psych0tik.net> In-Reply-To: <CAJ-VmomBuugHriOCJZMJ5%2Bi7Vm%2BV0GqviLdgcrSL-GC8T8Rj5g@mail.gmail.com> References: <20110801005639.GB20219@richh-desktop.boxdice.com.au> <CAJ-VmonBufiTCB60PnFK2rGjy0Y=EjaVSNiQni7UVUuvm3yvVQ@mail.gmail.com> <20110801030038.GB77144@DataIX.net> <20110801031706.GB31782@richh-desktop.boxdice.com.au> <CAJ-VmomBuugHriOCJZMJ5%2Bi7Vm%2BV0GqviLdgcrSL-GC8T8Rj5g@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
--TakKZr9L6Hm6aLOc Content-Type: text/plain; charset=us-ascii; format=flowed Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On 01/08/11 11:20 +0800, Adrian Chadd wrote: >On 1 August 2011 11:17, richo <richo@psych0tik.net> wrote: > >>> Should be noted .... does this happen with a generic kernel ? The >>> default ATH setup works perfectly and I can attest to it working just >>> fine built in here. >> >> First thing I tried was with GENERIC (iirc, freeBSD doesn't support any >> other >> configuration?) and still no dice. >> >> Adrian, I saw your post and I will have a look at what that function ret= urns >> to see if I can track it down. > >ok. I bet you'll find that the hardware just wasn't setup correctly at >the time where ath was being probed. > >This could be because of things like ACPI extensions not having turned >on the NIC (software rfkill, for example) or something equally >strange. > >If you can get it reproducable, we can work on it together. > > >Adrian Hi Adrian, I had a bit more of a play- it seems that it's something to do with how loader.conf arranges the module insertion. dmesg: Copyright (c) 1992-2011 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.0-BETA1 #17 r224492: Sat Jul 30 11:48:28 EST 2011 root@solitaire.psych0tik.net:/usr/obj/usr/src/sys/SOLITAIRE i386 CPU: Intel(R) Pentium(R) M processor 1300MHz (1298.92-MHz 686-class CPU) Origin =3D "GenuineIntel" Id =3D 0x695 Family =3D 6 Model =3D 9 Step= ping =3D 5 Features=3D0xa7e9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CM= OV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE> Features2=3D0x180<EST,TM2> real memory =3D 536870912 (512 MB) avail memory =3D 511254528 (487 MB) kbd1 at kbdmux0 acpi0: <DELL CPi R > on motherboard acpi0: reservation of 0, 9fc00 (3) failed acpi0: reservation of 100000, 1fef0000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 battery1: <ACPI Control Method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci_link1: BIOS IRQ 11 for 0.31.INTB is invalid pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82855 host to AGP bridge> on hostb0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem 0xe8000000-0xeffff= fff,0xfcff0000-0xfcffffff irq 11 at device 0.0 on pci1 uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xbf80-0xbf9f irq 1= 1 at device 29.0 on pci0 usbus0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0 uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xbf40-0xbf5f irq 1= 1 at device 29.1 on pci0 usbus1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1 uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xbf20-0xbf3f irq 1= 1 at device 29.2 on pci0 usbus2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2 ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 0xf4fffc00-0xf4fff= fff irq 11 at device 29.7 on pci0 usbus3: EHCI version 1.0 usbus3: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> on ehci0 pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci_link1: BIOS IRQ 11 for 2.3.INTA is invalid pci2: <ACPI PCI bus> on pcib2 bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x001002> = mem 0xfaff0000-0xfaffffff irq 11 at device 0.0 on pci2 bge0: CHIP ID 0x00001002; ASIC REV 0x01; CHIP REV 0x10; PCI miibus0: <MII bus> on bge0 brgphy0: <BCM5703 1000BASE-T media interface> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000ba= seT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge0: Ethernet address: 00:0b:db:08:52:77 cbb0: <O2Micro OZ711E1 PCI-CardBus Bridge> at device 1.0 on pci2 cardbus0: <CardBus bus> on cbb0 cbb1: <O2Micro OZ711E1 PCI-CardBus Bridge> at device 1.1 on pci2 cardbus1: <CardBus bus> on cbb1 pci2: <network> at device 3.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177= ,0x376,0xbfa0-0xbfaf at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 pcm0: <Intel ICH4 (82801DB)> port 0xb800-0xb8ff,0xbc40-0xbc7f mem 0xf4fff80= 0-0xf4fff9ff,0xf4fff400-0xf4fff4ff irq 9 at device 31.5 on pci0 pcm0: <SigmaTel STAC9750/51 AC97 Codec> pci0: <simple comms, generic modem> at device 31.6 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model GlidePoint, device ID 0 atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x77 irq 8 on acpi0 Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 Timecounters tick every 1.000 msec usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 480Mbps High Speed USB v2.0 cbb1: 16-bit card inserted, but no pccard bus. ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1: <Intel> at usbus3 uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 ada0 at ata0 bus 0 scbus0 target 0 lun 0 ada0: <IC25N020ATCS04-0 CA2OA72A> ATA-5 device ada0: 100.000MB/s transfers (UDMA5, PIO 8192bytes) ada0: 19077MB (39070080 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad0 cd0 at ata1 bus 0 scbus1 target 0 lun 0 cd0: <SAMSUNG CDRW/DVD SN-324B U102> Removable CD-ROM SCSI-0 device=20 cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) cd0: cd present [3989280 x 2048 byte records] ath0: <Atheros 5212> mem 0xf6010000-0xf601ffff irq 11 at device 0.0 on card= bus0 ath0: unable to attach hardware; HAL status 3 device_attach: ath0 attach returned 6 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub3: 6 ports with 6 removable, self powered Trying to mount root from ufs:/dev/ad0s1a [rw]... fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8 -----------8<---------------------------- interface wlan.1 already present in the KLD 'kernel'! ath0: <Atheros 5212> mem 0xf6010000-0xf601ffff irq 11 at device 0.0 on card= bus0 ath0: AR2413 mac 7.9 RF2413 phy 4.5 wlan0: Ethernet address: 00:15:e9:45:a5:84 wlan0: link state changed to UP The mark where the --------8<----- is is where I began playing with the computer, unloading if_ath.ko and if_ath_pci.ko with kldunload and then loading them again with kldload got the card working.. looks like a race condition to me? Ignore the interface wlan.1 line, I tried loading the wlan.ko in case it would help. --=20 richo || Today's excuse:=20 Defunct processes=0D --TakKZr9L6Hm6aLOc Content-Type: application/pgp-signature; name="signature.asc" Content-Description: Digital signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQEcBAEBAgAGBQJONsBIAAoJEIKiWz6J5yQVBhkIALrzhkCS3xAqeOmFgsZsu/IC UaY1nkTusDuTI5TMmOmI+gRpgRMX0QJUKOS1Cy7x8KRTTIF2Bbv7nZl6dvQj1Gxz UNViI6ZtphtCCyhG97H4EEzgMrOSIhLQSSwX2+LfVaolkApxclYKQ7H7Em7nz5TF 5Qd+PYbA5jn2a3N54+BEg6EjdyCeLKTlrf1N101urhXsJNrxpkww6MtedyKNZF7Q v3RAzEOvXvnldhRTTyBv1j8JsEw+B/qyxPDIBNoa+d+CdZr5xDShbcgagsKhQ9ER CJAsGM0vHxnIlMp5fjVolZdcPRv3F1CesemGGS06KUluC8bSf0glZ3HVM0FQ6Fc= =bd0Z -----END PGP SIGNATURE----- --TakKZr9L6Hm6aLOc--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20110801150242.GA14650>