Date: Thu, 26 Oct 2017 17:17:52 +0700 From: Eugene Grosbein <eugen@grosbein.net> To: Mike Tancsa <mike@sentex.net>, FreeBSD-STABLE Mailing List <freebsd-stable@freebsd.org> Subject: Re: ppp routing bug ? Message-ID: <59F1B650.5070107@grosbein.net> In-Reply-To: <a23ed8b3-1050-12d5-6a7c-1a1a0c174251@sentex.net> References: <bdb4d277-40ca-5a8e-f0e0-c1734a0c88c6@sentex.net> <a23ed8b3-1050-12d5-6a7c-1a1a0c174251@sentex.net>
index | next in thread | previous in thread | raw e-mail
On 26.10.2017 04:10, Mike Tancsa wrote: > On 10/25/2017 4:54 PM, Mike Tancsa wrote: >> While testing out our nanobsd RELENG11 images, I noticed a strange >> routing issue. Using a standard pppoe config that has been working fine >> on RELENG8,9,10 I am getting bogus routing entries. >> having the commands in ppp.linkup >> >> pppoe: >> add 192.168.134.2/32 HISADDR >> add 192.168.134.3/32 HISADDR >> add 192.168.134.4/32 HISADDR >> add 192.168.134.5/32 HISADDR > > Upping the logs with debug > > > ppp[60212]: tun0: Command: pppoe: add 192.168.134.2/32 HISADDR > ppp[60212]: tun0: Debug: wrote 124: cmd = Add, dst = 192.168.134.2, > gateway = 64.7.128.7 > > The gateway is correct. Seems right, but its not installing it right. > > > > > It also borkes on the ipv6 addr which I have disabled > > ppp[60212]: tun0: Warning: ff02::: Change route failed: errno: Value too > large to be stored in data type > ppp[60212]: tun0: Debug: deflink: DescriptorRead: read 14/2048 from 1 > ppp[60212]: tun0: Debug: proto_LayerPull: unknown -> 0xc021 > ppp[60212]: tun0: Debug: link_PullPacket: Despatch proto 0xc021 > > > Any ideas ? Are you sure that: 1) your ppp(8) binary is in sync with the kernel in the Nanobsd build ? Generally that would be /usr/sbin/ppp but in your case I'd check twice if this is the case. 2) your /sbin/route and /usr/bin/netstat are in sync too? Try using "route -n monitor" in the background to see what "ppp" really sends to the kernel. Try using "mpd5" instead of "ppp" to make PPPoE connection and see if it runs into same problem.home | help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?59F1B650.5070107>