Date: Thu, 17 Jun 1999 01:26:11 +0300 From: Arabian <Arabian@DAL.NET> To: FreeBSD-HardWare@FreeBSD.ORG Cc: dwhite@resnet.uoregon.edu Subject: odd dmesg. Message-ID: <3.0.6.32.19990617012611.007ce900@qatar.net.qa>
next in thread | raw e-mail | index | archive | help
Hello,
I'm getting this odd dmesg, even the server runs smoothly.
FreeBSD 3.2-STABLE #0: Mon May 31 08:53:45 PDT 1999
lomag@galaxy.ca.us.dal.net:/usr/src/sys/compile/GALAXY
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 451025177 Hz
CPU: Pentium II/Xeon/Celeron (451.03-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping=2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,
PAT,PSE36,MMX,<b24>>
real memory = 268435456 (262144K bytes)
config> di psm0
No such device: psm0
Invalid command or syntax. Type `?' for help.
config> di zp0
No such device: zp0
Invalid command or syntax. Type `?' for help.
config> di ze0
No such device: ze0
Invalid command or syntax. Type `?' for help.
config> di lnc0
No such device: lnc0
Invalid command or syntax. Type `?' for help.
config> di le0
No such device: le0
Invalid command or syntax. Type `?' for help.
config> di ie0
No such device: ie0
Invalid command or syntax. Type `?' for help.
config> di fe0
No such device: fe0
Invalid command or syntax. Type `?' for help.
config> di ep0
No such device: ep0
Invalid command or syntax. Type `?' for help.
config> di ed0
No such device: ed0
Invalid command or syntax. Type `?' for help.
config> di cs0
No such device: cs0
Invalid command or syntax. Type `?' for help.
config> di wt0
No such device: wt0
Invalid command or syntax. Type `?' for help.
config> di scd0
No such device: scd0
Invalid command or syntax. Type `?' for help.
config> di mcd0
No such device: mcd0
Invalid command or syntax. Type `?' for help.
config> di matcdc0
No such device: matcdc0
Invalid command or syntax. Type `?' for help.
config> di bt0
No such device: bt0
Invalid command or syntax. Type `?' for help.
config> di aha0
No such device: aha0
Invalid command or syntax. Type `?' for help.
config> di adv0
No such device: adv0
Invalid command or syntax. Type `?' for help.
config> en wdc1
No such device: wdc1
Invalid command or syntax. Type `?' for help.
config> po wdc1 0x170
No such device: wdc1
Invalid command or syntax. Type `?' for help.
config> ir wdc1 15
No such device: wdc1
Invalid command or syntax. Type `?' for help.
config> f wdc1 0
No such device: wdc1
Invalid command or syntax. Type `?' for help.
config> q
avail memory = 258732032 (252668K bytes)
Preloaded elf kernel "kernel" at 0xc021f000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc021f09c.
Probing for devices on PCI bus 0:
chip0: <Intel 82443BX host to PCI bridge> rev 0x03 on pci0.0.0
chip1: <Intel 82443BX host to AGP bridge> rev 0x03 on pci0.1.0
chip2: <Intel 82371AB PCI to ISA bridge> rev 0x02 on pci0.4.0
ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.4.1
chip3: <Intel 82371AB Power management controller> rev 0x02 on pci0.4.3
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> rev 0x05 int a irq 12 on
pci0.10.0
fxp0: Ethernet address 00:90:27:41:ef:7c
Probing for devices on PCI bus 1:
vga0: <S3 model 8a10 graphics accelerator> rev 0x04 int a irq 11 on pci1.0.0
Probing for PnP devices:
CSN 1 Vendor ID: OPT0931 [0x3109143e] Serial 0xffffffff Comp ID: @@@0000
[0x00000000]
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <QUANTUM FIREBALL ST6.4A>
wd0: 6149MB (12594960 sectors), 13328 cyls, 15 heads, 63 S/T, 512 B/S
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
changing root device to wd0s2a
fxp0: promiscuous mode enabled
This is for the first server, and here is the kernel.
============================================================================
===
# $Id: GENERIC,v 1.143.2.14 1999/05/17 05:49:45 obrien Exp $
machine "i386"
cpu "I686_CPU"
ident GALAXY
maxusers 256
options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep
this!]
options PROCFS #Process filesystem
options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!]
options SCSI_DELAY=15000 #Be pessimistic about Joe SCSI device
options UCONSOLE #Allow users to grab the console
options FAILSAFE #Be conservative
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options NMBCLUSTERS=9000
config kernel root on wd0
controller isa0
controller pnp0
controller eisa0
controller pci0
controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2
disk fd0 at fdc0 drive 0
#disk fd1 at fdc0 drive 1
options "CMD640" # work around CMD640 chip deficiency
controller wdc0 at isa? port "IO_WD1" bio irq 14
disk wd0 at wdc0 drive 0
#disk wd1 at wdc0 drive 1
#controller wdc1 at isa? port "IO_WD2" bio irq 15
#disk wd2 at wdc1 drive 0
#disk wd3 at wdc1 drive 1
#options ATAPI #Enable ATAPI support for IDE bus
#options ATAPI_STATIC #Don't do it as an LKM
#device acd0 #IDE CD-ROM
device wfd0 #IDE Floppy (e.g. LS-120)
# atkbdc0 controlls both the keyboard and the PS/2 mouse
controller atkbdc0 at isa? port IO_KBD tty
device atkbd0 at isa? tty irq 1
#device psm0 at isa? tty irq 12
device vga0 at isa? port ? conflicts
#options PCVT_SCANSET=2 # IBM keyboards are non-std
device npx0 at isa? port IO_NPX irq 13
# The following Ethernet NICs are all PCI devices.
#
#device ax0 # ASIX AX88140A
#device de0 # DEC/Intel DC21x4x (``Tulip'')
device fxp0 # Intel EtherExpress PRO/100B (82557, 82558)
pseudo-device loop
pseudo-device ether
pseudo-device pty 16
pseudo-device gzip # Exec gzipped a.out's
pseudo-device bpfilter 2
pseudo-device snp 2
Your help is appreciated, Thakns in advance.
-Arabian aka Abdullah
Admin sahara.ca.us.dal.net & arabian.ca.us.dal.net
http://www.dal.net/
http://www.maxim.net
,,))))))));,
()))))))))))))),
(((((`````((((((,
((('' . `))))), .,;;,,
)| o ;-. `((((( ,;;;;;;;;,,;'
(' | / ) )))))), %%' ';;;;;;;'
) | | | )))((((`--------------------.%% ';;;,
o_|/
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hardware" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3.0.6.32.19990617012611.007ce900>