Date: Tue, 16 Dec 2003 11:20:07 +0100 From: Tim Reinders <tim@foomatic.nl> To: freebsd-scsi@freebsd.org Subject: problems with Adaptec 29320 Ultra320 SCSI adapter Message-ID: <1071570007.1439.4.camel@mmmmbob>
next in thread | raw e-mail | index | archive | help
Hi, I'm having problems with this adapter . When i boot my freebsd 4.9 box it dumps the card dmesg (debug on): Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.9-RELEASE-p1 #2: Mon Dec 15 16:33:21 CET 2003 root@house.scarlet-internet.nl:/usr/src/sys/compile/HOUSE Timecounter "i8254" frequency 1193182 Hz CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2399.33-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf27 Stepping = 7 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Hyperthreading: 2 logical CPUs real memory = 2146959360 (2096640K bytes) avail memory = 2085253120 (2036380K bytes) Programming 24 pins in IOAPIC #0 IOAPIC #0 intpin 2 -> irq 0 Programming 24 pins in IOAPIC #1 Programming 24 pins in IOAPIC #2 FreeBSD/SMP: Multiprocessor motherboard: 4 CPUs cpu0 (BSP): apic id: 0, version: 0x00050014, at 0xfee00000 cpu1 (AP): apic id: 6, version: 0x00050014, at 0xfee00000 cpu2 (AP): apic id: 1, version: 0x00050014, at 0xfee00000 cpu3 (AP): apic id: 7, version: 0x00050014, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x00178020, at 0xfec00000 io1 (APIC): apic id: 3, version: 0x00178020, at 0xfec80000 io2 (APIC): apic id: 4, version: 0x00178020, at 0xfec80400 Preloaded elf kernel "kernel" at 0xc04d2000. Warning: Pentium 4 CPU: PSE disabled Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 24 entries at 0xc00fde40 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard IOAPIC #0 intpin 16 -> irq 2 IOAPIC #0 intpin 19 -> irq 10 IOAPIC #0 intpin 18 -> irq 11 pci0: <PCI bus> on pcib0 pci0: <unknown card> (vendor=0x8086, dev=0x2541) at 0.1 pcib1: <PCI to PCI bridge (vendor=8086 device=2543)> at device 2.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <unknown card> (vendor=0x8086, dev=0x1461) at 28.0 pcib2: <PCI to PCI bridge (vendor=8086 device=1460)> at device 29.0 on pci1 IOAPIC #2 intpin 0 -> irq 16 IOAPIC #2 intpin 1 -> irq 17 IOAPIC #2 intpin 6 -> irq 18 IOAPIC #2 intpin 7 -> irq 19 pci2: <PCI bus> on pcib2 ahd0: <Adaptec 29320 Ultra320 SCSI adapter> port 0x3000-0x30ff,0x3400-0x34ff mem 0xf8200000-0xf8201fff irq 16 at device 1.0 on pci2 ahd0: scb size = 0x50, hscb size = 0x40 Reading mode 0x0 ahd0: Setting mode 0x33 ahd0: Seeprom Contents: 0x170c 0x170c 0x170c 0x170c 0x170c 0x170c 0x170c 0x170c 0xdf4 0x2807 0xffff 0xffff 0xffff 0xffff 0xffff 0x410 0x4350 0x6f74 0x4943 0x6972 0x2065 0x6e65 0x3d72 0x3638 0x7665 0x3d65 0x3036 0x0 0x0 0x0 0x0 0x0 (0): 1:c:fe:2 (1): 1:c:fe:2 (2): 1:c:fe:2 (3): 1:c:fe:2 (4): 1:c:fe:2 (5): 1:c:fe:2 (6): 1:c:fe:2 (7): 1:c:fe:2 (8): 1:c:fe:2 (9): 1:c:fe:2 (10): 1:c:fe:2 (11): 1:c:fe:2 (12): 1:c:fe:2 (13): 1:c:fe:2 (14): 1:c:fe:2 (15): 1:c:fe:2 ahd0: ahd_sglist_allocsize = 0x3000 Mapped SG data Mapped sense data ahd0: Setting mode 0x0 ahd0: Setting mode 0x11 ahd0: Setting mode 0x44 ahd0: Setting up iocell workaround ahd0: Setting mode 0x33 ahd0: Setting mode 0x22 ahd0: Setting mode 0x33 ahd0: Setting mode 0x22 ahd0: Setting mode 0x33 aic7901A: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs ahd1: <Adaptec 29320 Ultra320 SCSI adapter> port 0x3800-0x38ff,0x3c00-0x3cff mem 0xf8202000-0xf8203fff irq 17 at device 1.1 on pci2 ahd1: scb size = 0x50, hscb size = 0x40 Reading mode 0x0 ahd1: Setting mode 0x33 ahd1: Seeprom Contents: 0x17c8 0x17c8 0x17c8 0x17c8 0x17c8 0x17c8 0x17c8 0x17c8 0xdf4 0x2807 0xffff 0xffff 0xffff 0xffff 0xffff 0x410 0x9c00 0x9c00 0x0 0xa980 0xa980 0xffff 0x2 0x1 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 (0): 1:8:fe:3f (1): 1:8:fe:3f (2): 1:8:fe:3f (3): 1:8:fe:3f (4): 1:8:fe:3f (5): 1:8:fe:3f (6): 1:8:fe:3f (7): 1:8:fe:3f (8): 1:8:fe:3f (9): 1:8:fe:3f (10): 1:8:fe:3f (11): 1:8:fe:3f (12): 1:8:fe:3f (13): 1:8:fe:3f (14): 1:8:fe:3f (15): 1:8:fe:3f ahd1: ahd_sglist_allocsize = 0x3000 Mapped SG data Mapped sense data ahd1: Setting mode 0x0 ahd1: Setting mode 0x11 ahd1: Setting mode 0x44 ahd1: Setting up iocell workaround ahd1: Setting mode 0x33 ahd1: Setting mode 0x22 ahd1: Setting mode 0x33 ahd1: Setting mode 0x22 ahd1: Setting mode 0x33 aic7901A: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.16> port 0x4000-0x403f mem 0xf8220000-0xf823ffff irq 18 at device 3.0 on pci2 em0: Speed:N/A Duplex:N/A em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.16> port 0x4040-0x407f mem 0xf8240000-0xf825ffff irq 19 at device 3.1 on pci2 em1: Speed:N/A Duplex:N/A pci1: <unknown card> (vendor=0x8086, dev=0x1461) at 30.0 pcib3: <PCI to PCI bridge (vendor=8086 device=1460)> at device 31.0 on pci1 IOAPIC #1 intpin 6 -> irq 20 pci3: <PCI bus> on pcib3 asr0: <Adaptec Caching SCSI RAID> mem 0xfc000000-0xfdffffff,0xfb000000-0xfbffffff,0xf8300000-0xf83fffff irq 20 at device 3.0 on pci3 asr0: major=154 asr0: ADAPTEC 2015S FW Rev. 3B05, 2 channel, 256 CCBs, Protocol I2O pci0: <UHCI USB controller> at 29.0 irq 2 pci0: <UHCI USB controller> at 29.1 irq 10 pci0: <UHCI USB controller> at 29.2 irq 11 pcib4: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0 pci4: <PCI bus> on pcib4 pci4: <ATI Mach64-GR graphics accelerator> at 1.0 irq 2 isab0: <PCI to ISA bridge (vendor=8086 device=2480)> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH3 ATA100 controller> port 0x2060-0x206f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 irq 0 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <unknown card> (vendor=0x8086, dev=0x2483) at 31.3 irq 0 eisa0: <EISA bus> on motherboard eisa0: unknown card @@@0000 (0x00000000) at slot 3 orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xcefff,0xdc000-0xdffff,0xe0000-0xe3fff on isa0 pmtimer0 on isa0 fdc0: ready for input in output fdc0: cmd 3 failed at out byte 1 of 3 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 sio1: configured irq 3 not in bitmap of probed irqs 0 ahd1: PCI error Interrupt Reading mode 0x0 ahd1: Setting mode 0x33 >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< ahd1: Dumping Card State at program address 0x23 Mode 0x0 Card was paused HS_MAILBOX[0x0] INTCTL[0x0] SEQINTSTAT[0x0] SAVED_MODE[0x0] DFFSTAT[0x30]:(CURRFIFO_0|FIFO0FREE|FIFO1FREE) SCSISIGI[0x0]:(P_DATAOUT) SCSIPHASE[0x0] SCSIBUS[0x0] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x10]:(FASTMODE) SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x0] SSTAT1[0x8]:(BUSFREE) SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO) LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] SCB Count = 16 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x0 NEXTSCB 0x0 ahd1: Setting mode 0x22 qinstart = 0 qinfifonext = 0 QINFIFO: WAITING_TID_QUEUES: ahd1: Setting mode 0x33 Pending list: Total 0 Kernel Free SCB list: 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 Sequencer Complete DMA-inprog list: Sequencer Complete list: Sequencer DMA-Up and Complete list: ahd1: Setting mode 0x0 ahd1: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) ahd1: Setting mode 0x11 ahd1: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0 SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 ahd1: Setting mode 0x44 ahd1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x42 ahd1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0 SIMODE0[0x6c]:(ENOVERRUN|ENIOERR|ENSELDI|ENSELDO) ahd1: Setting mode 0x22 CCSCBCTL[0x0] ahd1: Setting mode 0x0 ahd1: REG0 == 0x6b65, SINDEX = 0x0, DINDEX = 0x0 ahd1: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0 CDB 0 0 0 0 0 0 STACK: 0x14 0x8 0x7 0x6 0x5 0x4 0x3 0x23 >>>>>>>>>>>>>>>>> ahd1: Setting mode 0x44 ahd1: Signaled Target Abort ahd1: Setting mode 0x0 APIC_IO: Testing 8254 interrupt delivery APIC_IO: routing 8254 via IOAPIC #0 intpin 2 DUMMYNET initialized (011031) IP packet filtering initialized, divert disabled, rule-based forwarding enabled, default to deny, logging limited to 10 packets/entry by default IPv6 packet filtering initialized, default to accept, unlimited logging SMP: AP CPU #2 Launched! SMP: AP CPU #1 Launched! acd0: CDROM <MATSHITA CR-177> at ata1-master PIO4 Waiting 15 seconds for SCSI devices to settle Reading mode 0x0 ahd0: Setting mode 0x33 ahd0: Setting mode 0x0 ahd0: Setting mode 0x33 ahd0: Setting mode 0x11 ahd0: Setting mode 0x33 ahd0: Setting mode 0x0 ahd0: Setting mode 0x33 Reading mode 0x33 ahd0: Setting mode 0x0 ahd0: Setting mode 0x11 ahd0: Setting mode 0x44 ahd0: Setting up iocell workaround ahd0: Setting mode 0x33 ahd0: Setting mode 0x22 ahd0: Setting mode 0x33 ahd0: Setting mode 0x22 ahd0: Setting mode 0x33 ahd0: Setting mode 0x22 ahd0: Setting mode 0x33 ahd0: Clearing FIFO 0 ahd0: Setting mode 0x0 ahd0: Setting mode 0x33 ahd0: Clearing FIFO 1 ahd0: Setting mode 0x11 ahd0: Setting mode 0x33 ahd0: Setting mode 0x22 ahd0: Setting mode 0x33 ahd0: Setting mode 0x22 ahd0: Setting mode 0x33 Reading mode 0x22 ahd1: Setting mode 0x33 ahd1: Setting mode 0x22 ahd1: Setting mode 0x33 ahd1: Setting mode 0x11 ahd1: Setting mode 0x33 ahd1: Setting mode 0x0 ahd1: Setting mode 0x33 Reading mode 0x33 ahd1: Setting mode 0x0 ahd1: Setting mode 0x11 ahd1: Setting mode 0x44 ahd1: Setting up iocell workaround ahd1: Setting mode 0x33 ahd1: Setting mode 0x22 ahd1: Setting mode 0x33 ahd1: Setting mode 0x22 ahd1: Setting mode 0x33 ahd1: Setting mode 0x22 ahd1: Setting mode 0x33 ahd1: Clearing FIFO 0 ahd1: Setting mode 0x0 ahd1: Setting mode 0x33 ahd1: Clearing FIFO 1 ahd1: Setting mode 0x11 ahd1: Setting mode 0x33 ahd1: Setting mode 0x22 ahd1: Setting mode 0x33 ahd1: Setting mode 0x22 ahd1: Setting mode 0x33 Reading mode 0x33 SMP: AP CPU #3 Launched! Reading mode 0x22 ahd1: Setting mode 0x33 ahd1: Setting mode 0x22 ahd0: Queueing SCB 0xf bus addr 0x7c8c3e00 - 0x07c496484/0x80000024 ahd0: Queueing SCB 0xe bus addr 0x7c89f3c0 - 0x07c496284/0x80000024 ahd0: Queueing SCB 0xd bus addr 0x7c89f380 - 0x07c496084/0x80000024 ahd0: Queueing SCB 0xc bus addr 0x7c89f340 - 0x07c49ae84/0x80000024 ahd0: Queueing SCB 0xb bus addr 0x7c89f300 - 0x07c49ac84/0x80000024 ahd0: Queueing SCB 0xa bus addr 0x7c89f2c0 - 0x07c49aa84/0x80000024 ahd0: Queueing SCB 0x9 bus addr 0x7c89f280 - 0x07c49a884/0x80000024 ahd0: Queueing SCB 0x8 bus addr 0x7c89f240 - 0x07c49a684/0x80000024 ahd0: Queueing SCB 0x7 bus addr 0x7c89f200 - 0x07c49a484/0x80000024 ahd0: Queueing SCB 0x6 bus addr 0x7c89f1c0 - 0x07c49a284/0x80000024 ahd0: Queueing SCB 0x5 bus addr 0x7c89f180 - 0x07c49a084/0x80000024 ahd0: Queueing SCB 0x4 bus addr 0x7c89f140 - 0x07c4c1e84/0x80000024 ahd0: Queueing SCB 0x3 bus addr 0x7c89f100 - 0x07c4c1c84/0x80000024 ahd0: Queueing SCB 0x2 bus addr 0x7c89f0c0 - 0x07c4c1a84/0x80000024 ahd0: Queueing SCB 0x1 bus addr 0x7c89f080 - 0x07c4c1884/0x80000024 ahd1: Queueing SCB 0xf bus addr 0x7c869e00 - 0x07c4c1684/0x80000024 ahd1: Queueing SCB 0xe bus addr 0x7c8863c0 - 0x07c4c1484/0x80000024 ahd1: Queueing SCB 0xd bus addr 0x7c886380 - 0x07c4c1284/0x80000024 ahd1: Queueing SCB 0xc bus addr 0x7c886340 - 0x07c4c1084/0x80000024 ahd1: Queueing SCB 0xb bus addr 0x7c886300 - 0x07c46ae84/0x80000024 ahd1: Queueing SCB 0xa bus addr 0x7c8862c0 - 0x07c46ac84/0x80000024 ahd1: Queueing SCB 0x9 bus addr 0x7c886280 - 0x07c46aa84/0x80000024 ahd1: Queueing SCB 0x8 bus addr 0x7c886240 - 0x07c46a884/0x80000024 ahd1: Queueing SCB 0x7 bus addr 0x7c886200 - 0x07c46a684/0x80000024 ahd1: Queueing SCB 0x6 bus addr 0x7c8861c0 - 0x07c46a484/0x80000024 ahd1: Queueing SCB 0x5 bus addr 0x7c886180 - 0x07c46a284/0x80000024 ahd1: Queueing SCB 0x4 bus addr 0x7c886140 - 0x07c46a084/0x80000024 ahd1: Queueing SCB 0x3 bus addr 0x7c886100 - 0x07c471e84/0x80000024 ahd1: Queueing SCB 0x2 bus addr 0x7c8860c0 - 0x07c471c84/0x80000024 ahd1: Queueing SCB 0x1 bus addr 0x7c886080 - 0x07c471a84/0x80000024 Reading mode 0x33 (probe0:ahd0:0:0:0): Saw Selection Timeout for SCB 0xf ahd0:A:0:0: Forcing renegotiation ahd0: Setting mode 0x22 ahd0: Setting mode 0x33 ahd0: Setting mode 0x44 ahd0: iocell first selection ahd0: Setting mode 0x33 Reading mode 0x33 (probe15:ahd1:0:0:0): Saw Selection Timeout for SCB 0xf ahd1:A:0:0: Forcing renegotiation ahd1: Setting mode 0x22 ahd1: Setting mode 0x33 ahd1: Setting mode 0x44 ahd1: iocell first selection ahd1: BYPASS now disabled ahd1: Setting mode 0x33 Reading mode 0x22 ahd0: Setting mode 0x33 (probe1:ahd0:0:1:0): Saw Selection Timeout for SCB 0xe ahd0:A:1:0: Forcing renegotiation ahd0: Setting mode 0x22 ahd0: Setting mode 0x33 ahd0: Setting mode 0x22 Reading mode 0x22 ahd1: Setting mode 0x33 (probe16:ahd1:0:1:0): Saw Selection Timeout for SCB 0xe ahd1:A:1:0: Forcing renegotiation ahd1: Setting mode 0x22 ahd1: Setting mode 0x33 ahd1: Setting mode 0x22 Reading mode 0x22 ahd0: Setting mode 0x33 (probe2:ahd0:0:2:0): Saw Selection Timeout for SCB 0xd ahd0:A:2:0: Forcing renegotiation ahd0: Setting mode 0x22 ahd0: Setting mode 0x33 ahd0: Setting mode 0x22 Reading mode 0x22 ahd1: Setting mode 0x33 (probe17:ahd1:0:2:0): Saw Selection Timeout for SCB 0xd ahd1:A:2:0: Forcing renegotiation ahd1: Setting mode 0x22 ahd1: Setting mode 0x33 ahd1: Setting mode 0x22 Reading mode 0x22 ahd0: Setting mode 0x33 (probe3:ahd0:0:3:0): Saw Selection Timeout for SCB 0xc ahd0:A:3:0: Forcing renegotiation ahd0: Setting mode 0x22 ahd0: Setting mode 0x33 ahd0: Setting mode 0x22 Reading mode 0x22 ahd1: Setting mode 0x33 (probe18:ahd1:0:3:0): Saw Selection Timeout for SCB 0xc ahd1:A:3:0: Forcing renegotiation ahd1: Setting mode 0x22 ahd1: Setting mode 0x33 ahd1: Setting mode 0x22 Reading mode 0x22 ahd0: Setting mode 0x33 (probe4:ahd0:0:4:0): Saw Selection Timeout for SCB 0xb ahd0:A:4:0: Forcing renegotiation ahd0: Setting mode 0x22 ahd0: Setting mode 0x33 ahd0: Setting mode 0x22 Reading mode 0x22 ahd1: Setting mode 0x33 (probe19:ahd1:0:4:0): Saw Selection Timeout for SCB 0xb ahd1:A:4:0: Forcing renegotiation ahd1: Setting mode 0x22 ahd1: Setting mode 0x33 ahd1: Setting mode 0x22 Reading mode 0x22 ahd0: Setting mode 0x33 (probe5:ahd0:0:5:0): Saw Selection Timeout for SCB 0xa ahd0:A:5:0: Forcing renegotiation ahd0: Setting mode 0x22 ahd0: Setting mode 0x33 ahd0: Setting mode 0x22 Reading mode 0x22 ahd1: Setting mode 0x33 (probe20:ahd1:0:5:0): Saw Selection Timeout for SCB 0xa ahd1:A:5:0: Forcing renegotiation ahd1: Setting mode 0x22 ahd1: Setting mode 0x33 ahd1: Setting mode 0x22 Reading mode 0x22 ahd0: Setting mode 0x33 (probe6:ahd0:0:6:0): Saw Selection Timeout for SCB 0x9 ahd0:A:6:0: Forcing renegotiation ahd0: Setting mode 0x22 ahd0: Setting mode 0x33 ahd0: Setting mode 0x22 Reading mode 0x22 ahd1: Setting mode 0x33 (probe21:ahd1:0:6:0): Saw Selection Timeout for SCB 0x9 ahd1:A:6:0: Forcing renegotiation ahd1: Setting mode 0x22 ahd1: Setting mode 0x33 ahd1: Setting mode 0x22 Reading mode 0x22 ahd0: Setting mode 0x33 (probe7:ahd0:0:8:0): Saw Selection Timeout for SCB 0x8 ahd0:A:8:0: Forcing renegotiation ahd0: Setting mode 0x22 ahd0: Setting mode 0x33 ahd0: Setting mode 0x22 Reading mode 0x22 ahd1: Setting mode 0x33 (probe22:ahd1:0:8:0): Saw Selection Timeout for SCB 0x8 ahd1:A:8:0: Forcing renegotiation ahd1: Setting mode 0x22 ahd1: Setting mode 0x33 ahd1: Setting mode 0x22 Reading mode 0x22 ahd0: Setting mode 0x33 (probe8:ahd0:0:9:0): Saw Selection Timeout for SCB 0x7 ahd0:A:9:0: Forcing renegotiation ahd0: Setting mode 0x22 ahd0: Setting mode 0x33 ahd0: Setting mode 0x22 Reading mode 0x22 ahd1: Setting mode 0x33 (probe23:ahd1:0:9:0): Saw Selection Timeout for SCB 0x7 ahd1:A:9:0: Forcing renegotiation ahd1: Setting mode 0x22 ahd1: Setting mode 0x33 ahd1: Setting mode 0x22 Reading mode 0x22 ahd0: Setting mode 0x33 (probe9:ahd0:0:10:0): Saw Selection Timeout for SCB 0x6 ahd0:A:10:0: Forcing renegotiation ahd0: Setting mode 0x22 ahd0: Setting mode 0x33 ahd0: Setting mode 0x22 Reading mode 0x22 ahd1: Setting mode 0x33 (probe24:ahd1:0:10:0): Saw Selection Timeout for SCB 0x6 ahd1:A:10:0: Forcing renegotiation ahd1: Setting mode 0x22 ahd1: Setting mode 0x33 ahd1: Setting mode 0x22 Reading mode 0x22 ahd0: Setting mode 0x33 (probe10:ahd0:0:11:0): Saw Selection Timeout for SCB 0x5 ahd0:A:11:0: Forcing renegotiation ahd0: Setting mode 0x22 ahd0: Setting mode 0x33 ahd0: Setting mode 0x22 Reading mode 0x22 ahd1: Setting mode 0x33 (probe25:ahd1:0:11:0): Saw Selection Timeout for SCB 0x5 ahd1:A:11:0: Forcing renegotiation ahd1: Setting mode 0x22 ahd1: Setting mode 0x33 ahd1: Setting mode 0x22 Reading mode 0x22 ahd0: Setting mode 0x33 (probe11:ahd0:0:12:0): Saw Selection Timeout for SCB 0x4 ahd0:A:12:0: Forcing renegotiation ahd0: Setting mode 0x22 ahd0: Setting mode 0x33 ahd0: Setting mode 0x22 Reading mode 0x22 ahd1: Setting mode 0x33 (probe26:ahd1:0:12:0): Saw Selection Timeout for SCB 0x4 ahd1:A:12:0: Forcing renegotiation ahd1: Setting mode 0x22 ahd1: Setting mode 0x33 ahd1: Setting mode 0x22 Reading mode 0x22 ahd0: Setting mode 0x33 (probe12:ahd0:0:13:0): Saw Selection Timeout for SCB 0x3 ahd0:A:13:0: Forcing renegotiation ahd0: Setting mode 0x22 ahd0: Setting mode 0x33 ahd0: Setting mode 0x22 Reading mode 0x22 ahd1: Setting mode 0x33 (probe27:ahd1:0:13:0): Saw Selection Timeout for SCB 0x3 ahd1:A:13:0: Forcing renegotiation ahd1: Setting mode 0x22 ahd1: Setting mode 0x33 ahd1: Setting mode 0x22 Reading mode 0x22 ahd0: Setting mode 0x33 (probe13:ahd0:0:14:0): Saw Selection Timeout for SCB 0x2 ahd0:A:14:0: Forcing renegotiation ahd0: Setting mode 0x22 ahd0: Setting mode 0x33 ahd0: Setting mode 0x22 Reading mode 0x22 ahd1: Setting mode 0x33 (probe28:ahd1:0:14:0): Saw Selection Timeout for SCB 0x2 ahd1:A:14:0: Forcing renegotiation ahd1: Setting mode 0x22 ahd1: Setting mode 0x33 ahd1: Setting mode 0x22 Reading mode 0x22 ahd0: Setting mode 0x33 (probe14:ahd0:0:15:0): Saw Selection Timeout for SCB 0x1 ahd0:A:15:0: Forcing renegotiation ahd0: Setting mode 0x22 ahd0: Setting mode 0x33 ahd0: Setting mode 0x22 Reading mode 0x22 ahd1: Setting mode 0x33 (probe29:ahd1:0:15:0): Saw Selection Timeout for SCB 0x1 ahd1:A:15:0: Forcing renegotiation ahd1: Setting mode 0x22 ahd1: Setting mode 0x33 ahd1: Setting mode 0x22 pass2 at asr0 bus 0 target 6 lun 0 pass2: <SUPER GEM318 0> Fixed Processor SCSI-2 device da0 at asr0 bus 0 target 0 lun 0 da0: <SEAGATE ST336607LC 0007> Fixed Direct Access SCSI-3 device da0: Tagged Queueing Enabled da0: 35003MB (71687355 512 byte sectors: 255H 63S/T 4462C) da1 at asr0 bus 0 target 1 lun 0 da1: <ADAPTEC RAID-0 3B05> Fixed Direct Access SCSI-2 device da1: Tagged Queueing Enabled da1: 70007MB (143374336 512 byte sectors: 255H 63S/T 8924C) Anyone else having problems with this adapter ? Thanks, Tim
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1071570007.1439.4.camel>