Date: Thu, 15 Jun 2000 16:25:34 +0200 (CEST) From: Marc van Woerkom <van.woerkom@netcologne.de> To: van.woerkom@netcologne.de Cc: current@FreeBSD.ORG Subject: Re: HEADS UP!: config changes... Message-ID: <200006151425.QAA00932@oranje.my.domain> In-Reply-To: <200006151029.MAA09551@oranje.my.domain> (message from Marc van Woerkom on Thu, 15 Jun 2000 12:29:59 %2B0200 (CEST)) References: <20000613231829.2F4BF1CD7@overcee.netplex.com.au> <200006151029.MAA09551@oranje.my.domain>
next in thread | previous in thread | raw e-mail | index | archive | help
> 4. I thought I put just the sym driver in the kernel, why do I
> see ncr? (see next item)
Now it is back to using sym.
Possibly some configuration mistake by me.
Regards,
Marc
PS Here is the diff..
-FreeBSD 5.0-CURRENT #15: Thu Jun 15 00:25:51 CEST 2000
+FreeBSD 5.0-CURRENT #16: Thu Jun 15 11:31:41 CEST 2000
marc@oranje.my.domain:/usr/src/sys/compile/ORANJE
Timecounter "i8254" frequency 1193182 Hz
-Timecounter "TSC" frequency 300684562 Hz
+Timecounter "TSC" frequency 300683613 Hz
CPU: AMD-K6tm w/ multimedia extensions (300.68-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x570 Stepping = 0
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
AMD Features=0x400<<b10>>
real memory = 201326592 (196608K bytes)
-avail memory = 192716800 (188200K bytes)
-Preloaded elf kernel "kernel" at 0xc032c000.
-VESA: v3.0, 4096k memory, flags:0x1, mode table:0xc02cd122 (1000022)
+avail memory = 192753664 (188236K bytes)
+Preloaded elf kernel "kernel" at 0xc0323000.
+VESA: v3.0, 4096k memory, flags:0x1, mode table:0xc02c5142 (1000022)
VESA: NVidia
npx0: <math processor> on motherboard
npx0: INT 16 interface
@@ -55,7 +26,8 @@
atapci1: <HighPoint HPT366 ATA66 controller> port 0x6500-0x65ff,0x6400-0x6403,0x6300-0x6307 irq 15 at device 11.0 on pci0
ata2: at 0x6300 on atapci1
atapci2: <HighPoint HPT366 ATA66 controller> port 0x6800-0x68ff,0x6700-0x6703,0x6600-0x6607 irq 15 at device 11.1 on pci0
-ncr0: <ncr 53c875 fast20 wide scsi> port 0x6900-0x69ff mem 0xe2000000-0xe2000fff,0xe2002000-0xe20020ff irq 11 at device 13.0 on pci0
+sym0: <875> port 0x6900-0x69ff mem 0xe2000000-0xe2000fff,0xe2002000-0xe20020ff irq 11 at device 13.0 on pci0
+sym0: Tekram NVRAM, ID 7, Fast-20, SE, parity checking
pcm0: <AudioPCI ES1370> port 0x6a00-0x6a3f irq 10 at device 15.0 on pci0
pci0: <NVidia Riva TNT graphics accelerator> at 17.0 irq 9
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
@@ -101,22 +73,23 @@
ad0: 26059MB <Maxtor 92732U8> [52946/16/63] at ata2-master using UDMA66
Waiting 8 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da0s2a
-da0 at ncr0 bus 0 target 0 lun 0
+da0 at sym0 bus 0 target 0 lun 0
da0: <QUANTUM FIREBALL ST2.1S 0F0C> Fixed Direct Access SCSI-2 device
da0: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled
da0: 2068MB (4235629 512 byte sectors: 255H 63S/T 263C)
-cd0 at ncr0 bus 0 target 4 lun 0
+cd0 at sym0 bus 0 target 4 lun 0
cd0: <PIONEER DVD-ROM DVD-303 1.10> Removable CD-ROM SCSI-2 device
cd0: 20.000MB/s transfers (20.000MHz, offset 8)
cd0: Attempt to query device size failed: NOT READY, Medium not present
-da1 at ncr0 bus 0 target 1 lun 0
+da1 at sym0 bus 0 target 1 lun 0
da1: <IBM DCAS-34330W S65A> Fixed Direct Access SCSI-2 device
da1: 40.000MB/s transfers (20.000MHz, offset 15, 16bit)
da1: 4134MB (8467200 512 byte sectors: 255H 63S/T 527C)
-da2 at ncr0 bus 0 target 2 lun 0
+da2 at sym0 bus 0 target 2 lun 0
da2: <IBM DORS-32160 WA6A> Fixed Direct Access SCSI-2 device
da2: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled
da2: 2063MB (4226725 512 byte sectors: 255H 63S/T 263C)
da1s2: raw partition size != slice size
da1s2: start 2120580, end 2536379, size 415800
da1s2c: start 2120580, end 8465687, size 6345108
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200006151425.QAA00932>