Date: Sun, 30 Sep 2007 12:12:19 +0100 From: "chris.scott" <krad@snaffler.net> To: "chris.scott" <krad@snaffler.net> Cc: freebsd-hackers@freebsd.org Subject: Re: pci serial card problems Message-ID: <46FF8493.2050901@snaffler.net> In-Reply-To: <46FF83DF.6040108@snaffler.net> References: <46FF83DF.6040108@snaffler.net>
next in thread | previous in thread | raw e-mail | index | archive | help
hmm not sure this is the correct list now apologies if it isnt chris.scott wrote: > Hi > > i'm running freebsd stable (last build 28th) and am having a few > issues with 2 pci serial cards. Basically I'm trying to build a serial > server. However the driver doesn't seem to work correctly. > > Sep 28 22:18:56 boxster puc0: <NetMos NM9845 Hex UART> port > 0xce00-0xce07,0xcc00-0xcc07,0xca00-0xca07,0xc800-0xc807,0xc600-0xc607,0xc400-0xc40f > irq 9 at device 8.0 on pci0 > Sep 28 22:18:56 boxster puc1: <NetMos NM9845 Hex UART> port > 0xde00-0xde07,0xdc00-0xdc07,0xda00-0xda07,0xd800-0xd807,0xd600-0xd607,0xd400-0xd40f > irq 10 at device 11.0 on pci0 > Sep 28 22:18:56 boxster puc1: could not get resource > > > they are both 6 port serial pci cards, and are listed in the puc > driver as supported. The pc is quite old so Im not sure if whats > causing any issues. I have tried the bios with pnpos enables and > disabled but it makes little difference. I have also tried with one > card and the issue is the same. > > I have also disabled the pcs onboard serial ports and still no go > > I have disabled ACPI with hint.acpi.0.disabled="1" this seems to stop > the resource error but I dont get any additional cuad devices > > > $ pciconf -l -v | grep -B 4 UART > puc0@pci0:8:0: class=0x070002 card=0x00061000 chip=0x98459710 > rev=0x01 hdr=0x00 > vendor = 'MosChip Semiconductors (Was: Netmos Technology)' > device = 'Nm9845 Parallel/Serial Port Adapter' > class = simple comms > subclass = UART > -- > puc1@pci0:11:0: class=0x070002 card=0x00061000 chip=0x98459710 > rev=0x01 hdr=0x00 > vendor = 'MosChip Semiconductors (Was: Netmos Technology)' > device = 'Nm9845 Parallel/Serial Port Adapter' > class = simple comms > subclass = UART > > > > Any help much appreciated > > chris >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?46FF8493.2050901>