Date: Mon, 13 Nov 2000 17:45:30 -0500 (EST) From: Evan S <kaworu@sektor7.ath.cx> To: Brian Martinez <marti259@pilot.msu.edu> Cc: freebsd-stable@freebsd.org, freebsd-multimedia@freebsd.org Subject: Re: 4.1.1 / SMP / SBLive Message-ID: <Pine.GSO.4.10.10011131742120.3581-100000@wintermute.sekt7> In-Reply-To: <3A10304D.A01FEE35@pilot.msu.edu>
next in thread | previous in thread | raw e-mail | index | archive | help
Alright. Here's what I did today, but to no avail! :(
I upgraded to 4.2-BETA, since I've heard many people have had SB lives
working on it. Upgraded fine actually.
Here are the steps I took:
1. cd /dev
2. rm *dsp*
3. rm *audio*
4. ./MAKEDEV snd0
5. reboot
6. here's my dmesg: has sblive in it:
7. mpg123 Prodigy-SmackMyBitchUp.mp3 (no sound coming from speakers,
mpg123 did not complain) Tried with XMMS as well. Tried catting au to
/dev/dsp.
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.2-BETA #3: Sun Nov 12 16:17:20 GMT 2000
kaworu@teqnix.sekt7.org:/usr/src/sys/compile/KAWORU
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (544.09-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x665 Stepping = 5
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,P
AT,PSE36,MMX,FXSR>
real memory = 268435456 (262144K bytes)
avail memory = 256720896 (250704K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc048c000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <Matrox MGA G200 AGP graphics accelerator> at 0.0 irq 16
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1
on pci0
ata0: mask=03 status0=50 status1=00
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI probe a=14 b=eb
ata0-slave: ATAPI probe a=7f b=7f
ata0: mask=03 status0=10 status1=00
ata0: devices=04
ata0: at 0x1f0 irq 14 on atapci0
ata1: mask=03 status0=50 status1=00
ata1: mask=03 ostat0=50 ostat2=00
ata1-master: ATAPI probe a=00 b=00
ata1-slave: ATAPI probe a=00 b=00
ata1: mask=03 status0=50 status1=00
ata1-master: ATA probe a=01 b=a5
ata1: devices=01
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xc000-0xc01f irq 5
at devi
ce 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Timecounter "PIIX" frequency 3579545 Hz
chip1: <Intel 82371AB Power management controller> port 0x5000-0x500f at
device 7
.3 on pci0
pcm0: <Creative EMU10K1> port 0xc400-0xc41f irq 18 at device 11.0 on pci0
dc0: <82c169 PNIC 10/100BaseTX> port 0xcc00-0xccff mem
0xeb000000-0xeb0000ff irq
17 at device 13.0 on pci0
dc0: Ethernet address: 00:a0:cc:63:e1:8f
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atapci1: <HighPoint HPT366 ATA66 controller> port
0xd800-0xd8ff,0xd400-0xd403,0x
d000-0xd007 irq 18 at device 19.0 on pci0
<more ata devices>
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: IEEE1284 device found /NIBBLE
Probing for PnP devices on ppbus0:
ppbus0: <Hewlett-Packard LaserJet 4L> HP ENHANCED PCL5,PJL
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
SMP: AP CPU #1 Launched!
ad2: 29311MB <Maxtor 53073H6> [59554/16/63] at ata1-master UDMA33
acd0: CDROM <ATAPI 40X CDROM> at ata0-master using PIO4
Mounting root from ufs:/dev/ad2s1a
Okay. Sorry if that flooded. Now here is my /dev/sndstat
bash-2.04$ cat /dev/sndstat
FreeBSD Audio Driver (newpcm) Nov 12 2000 16:16:31
Installed devices:
pcm0: <Creative EMU10K1> at io 0xc400 irq 18 (4p/3r channels duplex)
Thanks,
Evan Sarmiento (kaworu@sekt7.org)
http://sekt7.org/es
On Mon, 13 Nov 2000, Brian Martinez wrote:
> I'm sending this to both the STABLE & MultiMedia lists. This thread originates
> however, in the freebsd-stable list.
> ======================================
>
> I would be curious about your outcome on the problem Evan, I too run an SMP box
> (Dual PII 450's) and I have a SBLive in there, Everything shows that it's working
> just fine.
>
> ************
> Bootup:
> Oct 22 16:38:27 iguana /kernel: pcm0: <Creative EMU10K1> port 0xef40-0xef5f irq 9
> at device 18.0 on pci0
> --- and ---
> > cat /dev/sndstat
> FreeBSD Audio Driver (newpcm) Sep 29 2000 14:51:47
> Installed devices:
> pcm0: <Creative EMU10K1> at io 0xef40 irq 9 (4p/3r channels duplex)
> ************
>
> On yours, my question is this. IRQ 16? That doesn't exist, there ARE 16 IRQs,
> but they start at 00 ( == System Timer). So I would be a little iffy on that in
> regards to your situation. However mine is at IRQ9, and I have the same thing.
> I turn the speakers up, put headphones in, installed Xmixer, turned up the volume
> in there, Everything I can think of and still NO sound. The only thing that gives
> me any kind of error is in /var/log/messages, and it seems to show up when I go to
> a site that has Flash and Sound in it:
>
> Oct 22 16:48:17 iguana /kernel: pcm0: sample rate tracker lock status change
> I also get one other error only on the console that says something about a buggy
> irq 10000.
>
> Any other insight on this would be extremely helpful :) I run 4.1.1-STABLE,
> I have read through approximately 4 different tutorials on how to get the Sound
> Blaster Live working under STABLE, and have been at this point for a couple of
> months now.
>
>
>
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-stable" in the body of the message
>
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.GSO.4.10.10011131742120.3581-100000>