Date: Tue, 13 Jan 2026 02:03:06 +0000 (GMT) From: jenkins-admin@FreeBSD.org To: emaste@FreeBSD.org, dim@FreeBSD.org, jrhall@FreeBSD.org, dev-ci@FreeBSD.org Cc: jenkins-admin@FreeBSD.org Subject: FreeBSD-stable-14-amd64-test - Build #1724 - Failure Message-ID: <58062609.719.1768269786494@jenkins.ci.freebsd.org> In-Reply-To: <2132273319.667.1768257187526@jenkins.ci.freebsd.org>
index | next in thread | previous in thread | raw e-mail
FreeBSD-stable-14-amd64-test - Build #1724 (215d16e4102b3c03c6bde13c78f57922b94ad74e) - Failure Build information: https://ci.FreeBSD.org/job/FreeBSD-stable-14-amd64-test/1724/ Full change log: https://ci.FreeBSD.org/job/FreeBSD-stable-14-amd64-test/1724/changes Full build log: https://ci.FreeBSD.org/job/FreeBSD-stable-14-amd64-test/1724/console Status explanation: "Failure" - the build is suspected being broken by the following changes "Still Failing" - the build has not been fixed by the following changes and this is a notification to note that these changes have not been fully tested by the CI system Change summaries: (Those commits are likely but not certainly responsible) 8d87742a96f59008e2fb655fa4434cd397d953a5 by jrhall: RELNOTES: Correct commit hash in commit ec98cb56861f 0e80562f15e3a634a2039cd88784957cb0f682c3 by dim: zfs: emit .note.GNU-stack section for all ELF targets 215d16e4102b3c03c6bde13c78f57922b94ad74e by emaste: openssh: Add detail on client side VersionAddendum The end of the build log: [...truncated 4.09 MiB...] epair1b: Ethernet address: 02:03:b9:56:c1:0b epair1a: link state changed to UP epair1b: link state changed to UP epair1b: promiscuous mode enabled epair0a: promiscuous mode enabled epair0a: promiscuous mode disabled epair1b: promiscuous mode disabled epair0b: link state changed to DOWN epair0a: link state changed to DOWN epair1a: link state changed to DOWN epair1b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [4.993s] sys/netpfil/pf/sctp:abort_v4 -> epair0a: Ethernet address: 02:ec:8f:8a:62:0a epair0b: Ethernet address: 02:ec:8f:8a:62:0b epair0a: link state changed to UP epair0b: link state changed to UP epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [11.161s] sys/netpfil/pf/sctp:abort_v6 -> epair0a: Ethernet address: 02:57:36:62:a6:0a epair0b: Ethernet address: 02:57:36:62:a6:0b epair0a: link state changed to UP epair0b: link state changed to UP epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.124s] sys/netpfil/pf/sctp:basic_v4 -> epair0a: Ethernet address: 02:a9:16:8b:41:0a epair0b: Ethernet address: 02:a9:16:8b:41:0b epair0a: link state changed to UP epair0b: link state changed to UP epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [11.157s] sys/netpfil/pf/sctp:basic_v6 -> epair0a: Ethernet address: 02:ed:00:13:1e:0a epair0b: Ethernet address: 02:ed:00:13:1e:0b epair0a: link state changed to UP epair0b: link state changed to UP epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.135s] sys/netpfil/pf/sctp:nat_v4 -> epair0a: Ethernet address: 02:31:ba:ea:da:0a epair0b: Ethernet address: 02:31:ba:ea:da:0b epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 02:b6:9c:02:42:0a epair1b: Ethernet address: 02:b6:9c:02:42:0b epair1a: link state changed to UP epair1b: link state changed to UP epair1a: link state changed to DOWN epair1b: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [11.256s] sys/netpfil/pf/sctp:nat_v6 -> epair0a: Ethernet address: 02:38:c0:a4:aa:0a epair0b: Ethernet address: 02:38:c0:a4:aa:0b epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 02:9c:2c:07:96:0a epair1b: Ethernet address: 02:9c:2c:07:96:0b epair1a: link state changed to UP epair1b: link state changed to UP epair1a: link state changed to DOWN epair1b: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.208s] sys/netpfil/pf/sctp:pfsync -> bridge0: Ethernet address: c2:62:36:df:1c:c2 bridge1: Ethernet address: ce:83:24:83:e0:ac epair0a: Ethernet address: 02:40:d4:86:8d:0a epair0b: Ethernet address: 02:40:d4:86:8d:0b epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 02:f5:79:7a:6f:0a epair1b: Ethernet address: 02:f5:79:7a:6f:0b epair1a: link state changed to UP epair1b: link state changed to UP epair2a: Ethernet address: 02:aa:83:c3:95:0a epair2b: Ethernet address: 02:aa:83:c3:95:0b epair2a: link state changed to UP epair2b: link state changed to UP epair3a: Ethernet address: 02:52:32:0f:44:0a epair3b: Ethernet address: 02:52:32:0f:44:0b epair3a: link state changed to UP epair3b: link state changed to UP epair4a: Ethernet address: 02:ba:f9:59:a9:0a epair4b: Ethernet address: 02:ba:f9:59:a9:0b epair4a: link state changed to UP epair4b: link state changed to UP epair5a: Ethernet address: 02:d6:06:f3:2e:0a epair5b: Ethernet address: 02:d6:06:f3:2e:0b epair5a: link state changed to UP epair5b: link state changed to UP epair6a: Ethernet address: 02:c7:c6:72:ef:0a epair6b: Ethernet address: 02:c7:c6:72:ef:0b epair6a: link state changed to UP epair6b: link state changed to UP epair0a: promiscuous mode enabled epair1a: promiscuous mode enabled epair2a: promiscuous mode enabled bridge0: link state changed to UP epair6a: promiscuous mode enabled epair4a: promiscuous mode enabled epair5a: promiscuous mode enabled bridge1: link state changed to UP epair1b: promiscuous mode enabled epair4b: promiscuous mode enabled carp: demoted by 240 to 240 (pfsync bulk start) epair2b: promiscuous mode enabled epair5b: promiscuous mode enabled carp: demoted by 240 to 240 (pfsync bulk start) carp: demoted by 50 to 290 (sysctl) carp: demoted by -240 to 0 (pfsync bulk done) carp: demoted by -240 to 50 (pfsync bulk done) epair0b: link state changed to DOWN epair0a: link state changed to DOWN carp: demoted by 240 to 240 (interface down) epair1b: link state changed to DOWN epair1a: link state changed to DOWN carp: demoted by 240 to 480 (interface down) epair4b: link state changed to DOWN epair4a: link state changed to DOWN epair3a: link state changed to DOWN epair3b: link state changed to DOWN carp: demoted by 240 to 290 (interface down) epair2b: link state changed to DOWN epair2a: link state changed to DOWN bridge0: link state changed to DOWN carp: demoted by 240 to 530 (interface down) epair5b: link state changed to DOWN epair5a: link state changed to DOWN epair6b: link state changed to DOWN epair6a: link state changed to DOWN bridge1: link state changed to DOWN failed: atf-check failed; see the output of the test for details [13.517s] sys/netpfil/pf/sctp:rdr_v4 -> epair0a: Ethernet address: 02:4d:0b:cf:e7:0a epair0b: Ethernet address: 02:4d:0b:cf:e7:0b epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 02:e4:9c:23:94:0a epair1b: Ethernet address: 02:e4:9c:23:94:0b epair1a: link state changed to UP epair1b: link state changed to UP epair1a: link state changed to DOWN epair1b: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: SCTP connection failed [4.254s] sys/netpfil/pf/sctp:related_icmp -> epair0a: Ethernet address: 02:73:93:2f:99:0a epair0b: Ethernet address: 02:73:93:2f:99:0b epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 02:91:3a:30:3f:0a epair1b: Ethernet address: 02:91:3a:30:3f:0b epair1a: link state changed to UP epair1b: link state changed to UP epair2a: Ethernet address: 02:e8:0c:f0:2f:0a epair2b: Ethernet address: 02:e8:0c:f0:2f:0b epair2a: link state changed to UP epair2b: link state changed to UP epair0b: link state changed to DOWN epair0a: link state changed to DOWN epair1a: link state changed to DOWN epair1b: link state changed to DOWN epair2a: link state changed to DOWN epair2b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [11.267s] sys/netpfil/pf/sctp:reuse -> epair0a: Ethernet address: 02:da:1a:61:8a:0a epair0b: Ethernet address: 02:da:1a:61:8a:0b epair0a: link state changed to UP epair0b: link state changed to UP epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [11.156s] sys/netpfil/pf/sctp:timeout -> passed [0.109s] sys/netpfil/pf/sctp.py:TestSCTP::test_allow_related -> epair0a: Ethernet address: 02:ca:ce:3b:e2:0a epair0b: Ethernet address: 02:ca:ce:3b:e2:0b epair0a: link state changed to UP epair0b: link state changed to UP lo0: link state changed to UP lo0: link state changed to UP epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: /usr/tests/sys/netpfil/pf/sctp.py:173: Exception [243.900s] sys/netpfil/pf/sctp.py:TestSCTP::test_disallow_related -> epair0a: Ethernet address: 02:db:0e:6e:3f:0a epair0b: Ethernet address: 02:db:0e:6e:3f:0b epair0a: link state changed to UP epair0b: link state changed to UP lo0: link state changed to UP lo0: link state changed to UP epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: /usr/tests/sys/netpfil/pf/sctp.py:173: Exception [243.911s] sys/netpfil/pf/sctp.py:TestSCTP::test_limit_addresses -> epair0a: Ethernet address: 02:eb:4e:76:24:0a epair0b: Ethernet address: 02:eb:4e:76:24:0b epair0a: link state changed to UP epair0b: link state changed to UP lo0: link state changed to UP lo0: link state changed to UP epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: /usr/tests/sys/netpfil/pf/sctp.py:173: Exception [244.029s] sys/netpfil/pf/sctp.py:TestSCTP::test_multihome -> epair0a: Ethernet address: 02:68:d4:4b:a1:0a epair0b: Ethernet address: 02:68:d4:4b:a1:0b epair0a: link state changed to UP epair0b: link state changed to UP lo0: link state changed to UP lo0: link state changed to UP + rc=0 + echo 'bhyve return code = 0' bhyve return code = 0 + sudo /usr/sbin/bhyvectl '--vm=testvm-14-amd64-1724' --destroy + sh -ex freebsd-ci/scripts/test/extract-meta.sh + METAOUTDIR=meta-out + rm -fr meta-out + mkdir meta-out + tar xvf meta.tar -C meta-out x ./ x ./auto-shutdown x ./disable-dtrace-tests.sh x ./run.sh x ./disable-zfs-tests.sh x ./disable-notyet-tests.sh x ./run-kyua.sh + rm -f test-report.txt test-report.xml + mv 'meta-out/test-report.*' . mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory + report=test-report.xml + [ -e freebsd-ci/jobs/FreeBSD-stable-14-amd64-test/xfail-list -a -e test-report.xml ] + rm -f disk-cam + jot 5 + rm -f disk1 + rm -f disk2 + rm -f disk3 + rm -f disk4 + rm -f disk5 + rm -f disk-test.img [PostBuildScript] - [INFO] Executing post build scripts. [FreeBSD-stable-14-amd64-test] $ /bin/sh -xe /tmp/jenkins716400483377321725.sh + ./freebsd-ci/artifact/post-link.py Post link: {'job_name': 'FreeBSD-stable-14-amd64-test', 'commit': '215d16e4102b3c03c6bde13c78f57922b94ad74e', 'branch': 'stable-14', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'} "Link created: stable-14/latest_tested/amd64/amd64 -> ../../215d16e4102b3c03c6bde13c78f57922b94ad74e/amd64/amd64\n" Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error? Checking for post-build Performing post-build step Checking if email needs to be generated Email was triggered for: Failure - Any Sending email for trigger: Failure - Any Sending mail from default account using System Admin e-mail addresshome | help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?58062609.719.1768269786494>