Date: Wed, 23 Aug 2000 14:13:01 +0200 From: Andreas Klemm <andreas@klemm.gtn.com> To: Andreas Klemm <andreas@klemm.gtn.com> Cc: freebsd-stable@FreeBSD.ORG Subject: debug session (with comsonsole) Re: 4.1-STABLE panics on boot with Huyundai Laptop (P233)) Message-ID: <20000823141301.A13102@titan.klemm.gtn.com> In-Reply-To: <20000823131811.A4418@titan.klemm.gtn.com>; from andreas@klemm.gtn.com on Wed, Aug 23, 2000 at 01:18:11PM %2B0200 References: <20000823131811.A4418@titan.klemm.gtn.com>
next in thread | previous in thread | raw e-mail | index | archive | help
disk1s2a:> set boot_verbose=3D1
disk1s2a:> load kernel
\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=
=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08/kernel =
text=3D0x132f17 -=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=
=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08=
\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=
=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08=
|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=
=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08=
/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=
=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08=
-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08data=3D0x1aa38+0x1cc20 |=08/=08-=08=
\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08syms=3D[0x4+0x22e80-=08\=08|=08=
/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08+0x4+0x2776b|=
=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08]
disk1s2a:> boot
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.1-STABLE #0: Wed Aug 23 13:34:52 CEST 2000
root@titan.klemm.gtn.com:/usr/src/sys/compile/LAPTOP4
Calibrating clock(s) ... TSC clock: 232523307 Hz, i8254 clock: 1193163 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium/P55C (232.53-MHz 586-class CPU)
Origin =3D "GenuineIntel" Id =3D 0x543 Stepping =3D 3
Features=3D0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory =3D 67108864 (65536K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x002d0000 - 0x03ff7fff, 64126976 bytes (15656 pages)
avail memory =3D 62615552 (61148K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00ec050
bios32: Entry =3D 0xee600 (c00ee600) Rev =3D 0 Len =3D 1
pcibios: PCI BIOS entry at 0x263e
pnpbios: Found PnP BIOS data at 0xc00ff000
pnpbios: Entry =3D ea000:13de Rev =3D 1.0
pnpbios: OEM ID 744e
Other BIOS signatures found:
ACPI: 00000000
Preloaded elf kernel "kernel" at 0xc02b7000.
Intel Pentium detected, installing workaround for F00F bug
md0: Malloc disk
Creating DISK md0
Math emulator present
pci_open(1): mode 1 addr port (0x0cf8) is 0x800008b0
pci_open(1a): mode1res=3D0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=3D060000] [hdr=3D00] is there (id=3D04061039)
pcib-: pcib0 exists, using next available unit number
npx0: <math processor> on motherboard
npx0: INT 16 interface
i586_bzero() bandwidth =3D 644329896 bytes/sec
bzero() bandwidth =3D 331785003 bytes/sec
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=3D0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=3D060000] [hdr=3D00] is there (id=3D04061039)
pcib0: <SiS 85c501> on motherboard
found-> vendor=3D0x1039, dev=3D0x0406, revid=3D0x00
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0
subordinatebus=3D0 secondarybus=3D0
found-> vendor=3D0x1039, dev=3D0x0008, revid=3D0x01
class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1
subordinatebus=3D0 secondarybus=3D0
found-> vendor=3D0x1039, dev=3D0x0601, revid=3D0x01
class=3D01-01-00, hdrtype=3D0x00, mfdev=3D1
subordinatebus=3D0 secondarybus=3D0
map[10]: type 1, range 32, base 00000174, size 2
map[14]: type 1, range 32, base 000001f4, size 2
map[18]: type 1, range 32, base 00000374, size 2
map[1c]: type 1, range 32, base 000003f4, size 2
found-> vendor=3D0x1023, dev=3D0x9660, revid=3D0xd3
class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0
subordinatebus=3D0 secondarybus=3D0
intpin=3Da, irq=3D255
map[10]: type 1, range 32, base 08000000, size 22
map[14]: type 1, range 32, base 08800000, size 16
map[18]: type 1, range 32, base 08400000, size 22
found-> vendor=3D0x119b, dev=3D0x1221, revid=3D0x02
class=3D06-05-00, hdrtype=3D0x00, mfdev=3D0
subordinatebus=3D0 secondarybus=3D0
intpin=3Da, irq=3D0
map[10]: type 1, range 32, base 000003e0, size 2
found-> vendor=3D0x119b, dev=3D0x1221, revid=3D0x02
class=3D06-05-00, hdrtype=3D0x00, mfdev=3D0
subordinatebus=3D0 secondarybus=3D0
intpin=3Da, irq=3D0
map[10]: type 1, range 32, base 000003e4, size 2
pci0: <PCI bus> on pcib0
isab0: <SiS 85c503 PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Generic PCI ATA controller> port 0x3f4-0x3f7,0x374-0x377,0x1f4-0x=
1f7,0x174-0x177 at device 1.1 on pci0
atapci0: Busmastering DMA not supported
ata-: ata2 exists, using next available unit number
panic: resource_list_alloc: resource entry is busy
Debugger("panic")
Stopped at Debugger+0x34: movb $0,in_Debugger.390
db> trace
Debugger(c0211d03) at Debugger+0x34
panic(c0212680,2,1,ffffffff,1) at panic+0x70
resource_list_alloc(c0a1fe04,c0a1e080,c0a1fd80,4,c02cbd4c) at resource_list=
_alloc+0xa0
pci_alloc_resource(c0a1e080,c0a1fd80,4,c02cbd4c,0) at pci_alloc_resource+0x=
38
BUS_ALLOC_RESOURCE(c0a1e080,c0a1fd80,4,c02cbd4c,0) at BUS_ALLOC_RESOURCE+0x=
43
ata_pci_alloc_resource(c0a1fd80,c0a1f880,4,c02cbde8,0) at ata_pci_alloc_res=
ource+0x1be
BUS_ALLOC_RESOURCE(c0a1fd80,c0a1f880,4,c02cbde8,0) at BUS_ALLOC_RESOURCE+0x=
43
bus_alloc_resource(c0a1f880,4,c02cbde8,0,ffffffff) at bus_alloc_resource+0x=
27
ata_probe(c0a1f880,c0a1f880,c0593a10,6011039,c02cbe10) at ata_probe+0xc9
ata_pcisub_probe(c0a1f880,c02cbe38,c0143459,c0a1f880,c0a1f880) at ata_pcisu=
b_probe+0xc4
DEVICE_PROBE(c0a1f880,c0a1f880,c0a1fd80,0,1) at DEVICE_PROBE+0x2e
device_probe_child(c0a1fd80,c0a1f880,c0a1f880,6011039,2000001) at device_pr=
obe_child+0xc1
device_probe_and_attach(c0a1f880) at device_probe_and_attach+0x29
bus_generic_attach(c0a1fd80,c0a1fd80,c0a1e080,0,c0a1f900) at bus_generic_at=
tach+0x16
ata_pci_attach(c0a1fd80,c02cbec4,c0143983,c0a1fd80,c0a1fd80) at ata_pci_att=
ach+0x40d
DEVICE_ATTACH(c0a1fd80,c0a1fd80,c0a1e180,0,c02cbed4) at DEVICE_ATTACH+0x2e
device_probe_and_attach(c0a1fd80) at device_probe_and_attach+0x4f
bus_generic_attach(c0a1e080,c02cbef8,c0143983,c0a1e080,c0a1e080) at bus_gen=
eric_attach+0x16
DEVICE_ATTACH(c0a1e080,c0a1e080,c0a1e300,0,c02cbf08) at DEVICE_ATTACH+0x2e
device_probe_and_attach(c0a1e080) at device_probe_and_attach+0x4f
bus_generic_attach(c0a1e180,c02cbf2c,c0143983,c0a1e180,c0a1e180) at bus_gen=
eric_attach+0x16
DEVICE_ATTACH(c0a1e180,c0a1e180,c0596880,0,c02cbf3c) at DEVICE_ATTACH+0x2e
device_probe_and_attach(c0a1e180) at device_probe_and_attach+0x4f
bus_generic_attach(c0a1e300,c0a1e300,c02cbf58,c011cb9e,c0a1e300) at bus_gen=
eric_attach+0x16
nexus_attach(c0a1e300,c02cbf70,c0143983,c0a1e300,c0a1e300) at nexus_attach+=
0xd
DEVICE_ATTACH(c0a1e300,c0a1e300,c0245a10,2d0000,c02cbf80) at DEVICE_ATTACH+=
0x2e
device_probe_and_attach(c0a1e300) at device_probe_and_attach+0x4f
root_bus_configure(c0596880,c022904c,0) at root_bus_configure+0x16
configure(0,2c9c00,2d0000,0,c011c5a4) at configure+0x33
mi_startup(c02cbfb4,b0206,ffe,2d0000,c0148071) at mi_startup+0x70
begin() at begin+0x4b
NOW I SIMPLY TRIED TO BOOT ANY FURTHER BY CALLING mi_startup
db> call mi_startup
nexus-: nexus0 exists, using next available unit number
apm-: apm0 exists, using next available unit number
npx-: npx0 exists, using next available unit number
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=3D0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=3D060000] [hdr=3D00] is there (id=3D04061039)
pcib-: pcib0 exists, using next available unit number
pcib-: pcib0 exists, using next available unit number
npx1: <math processor> on motherboard
npx1: INT 16 interface
i586_bzero() bandwidth =3D 644745325 bytes/sec
bzero() bandwidth =3D 645577792 bytes/sec
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=3D0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=3D060000] [hdr=3D00] is there (id=3D04061039)
pcib2: <SiS 85c501> on motherboard
pci2: <PCI bus> on pcib2
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=3D0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=3D060000] [hdr=3D00] is there (id=3D04061039)
pcib3: <SiS 85c601> on motherboard
pci3: <PCI bus> on pcib3
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata0: iobase=3D0x01f0 altiobase=3D0x03f6 bmaddr=3D0x0000
ata0: mask=3D03 status0=3D50 status1=3D00
ata0: mask=3D03 status0=3D50 status1=3D00
ata0: devices =3D 0x1
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1: iobase=3D0x0170 altiobase=3D0x0376 bmaddr=3D0x0000
ata1: mask=3D03 status0=3D50 status1=3D01
ata1: mask=3D03 status0=3D00 status1=3D01
ata1: devices =3D 0xc
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x1d0000
psm0: current command byte:0067
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 1c 03 3c
psm: status 1c 03 3c
psm: status 1c 03 3c
psm: data 08 00 00
psm: status 10 00 64
psm: status 00 02 64
psm: data 08 00 00
psm: status 00 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81=20
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96=20
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81=20
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96=20
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81=20
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96=20
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x100>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
pcic0: <VLSI 82C146> at port 0x3e0 iomem 0xd0000 irq 10 on isa0
pcic0: management irq 10
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
pcic1: not probed (disabled)
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x90 on isa0
sio0: type 16550A, console
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03127f3f 0..786=3D787 cylinders, 0..127=3D128 heads, 1..63=3D63 sectors
1:03feff00 0..1022=3D1023 cylinders, 0..255=3D256 heads, 1..0=3D0 sectors
2:03fdfe3f 0..1021=3D1022 cylinders, 0..254=3D255 heads, 1..63=3D63 sectors
3:03fe0200 0..1022=3D1023 cylinders, 0..2=3D3 heads, 1..0=3D0 sectors
0 accounted for
Device configuration finished.
bpf: faith0 attached
bpf: gif0 attached
bpf: gif1 attached
bpf: gif2 attached
bpf: gif3 attached
bpf: lo0 attached
pccard: card inserted, slot 0
pccard: card inserted, slot 1
ata1-slave: ata_command: timeout waiting for intr
ata1-slave: identify failed
ad0: <HITACHI_DK237A-32/00U0A0A0> ATA-3 disk at ata0 as master
ad0: 3102MB (6354432 sectors), 6304 cyls, 16 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, BIOSPIO
ad0: piomode=3D4 dmamode=3D2 udmamode=3D2 cblid=3D0
Creating DISK ad0
Creating DISK wd0
Mounting root from ufs:wd0s2a
wd0s1: type 0xb, start 63, end =3D 3693311, size 3693249 : OK
wd0s2: type 0xa5, start 3693312, end =3D 6354431, size 2661120 : OK
here the session and the machine hangs ....
--=20
Andreas Klemm Powered by FreeBSD =
SMP
Songs from our band >>64Bits<<............http://www.apsfilter.org/64bits.h=
tml
My homepage................................ http://people.FreeBSD.ORG/~andr=
eas
Please note: Apsfilter got a NEW HOME................http://www.apsfilter.o=
rg/
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000823141301.A13102>