Date: Tue, 01 Jul 1997 12:36:44 +0300 From: Uldis Mikelsons <ulmik@proxy.lkb.lv> To: freebsd-smp@freebsd.org Cc: Steve Passe <smp@csn.net> Subject: Re: compaq proliant 800 Message-ID: <33B8CFAC.6110@proxy.lkb.lv> References: <199706302042.OAA18493@Ilsa.StevesCafe.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Steve Passe wrote: > It is very important that you give us more details if we are going to track > this down. specifically, which options did you try? -------------------- options SMP_TIMER_NC -------------------- > boot the UP kernel and run "/usr/sbin/mptable -dmesg > outputfile". send > us this file. here it comes : =============================================================================== MPTable, version 2.0.11 ------------------------------------------------------------------------------- MP Floating Pointer Structure: location: BIOS physical address: 0x000f4ff0 signature: '_MP_' length: 16 bytes version: 1.4 checksum: 0x11 mode: Virtual Wire ------------------------------------------------------------------------------- MP Config Table Header: physical address: 0x000f7b05 signature: 'PCMP' base table length: 260 version: 1.4 checksum: 0xb3 OEM ID: 'COMPAQ ' Product ID: 'PROLIANT ' OEM table pointer: 0x00000000 OEM table size: 0 entry count: 24 local APIC address: 0xfee00000 extended table length: 0 extended table checksum: 0 ------------------------------------------------------------------------------- MP Config Base Table Entries: -- Processors: APIC ID Version State Family Model Step Flags 1 0x10 BSP, usable 6 1 9 0xfbff 0 0x10 AP, usable 6 1 9 0xfbff -- Bus: Bus ID Type 0 PCI 1 PCI 9 ISA -- I/O APICs: APIC ID Version State Address 2 0x01 usable 0xfec00000 -- I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID INT# INT active-hi edge 9 1 2 1 INT active-hi edge 9 0 2 2 INT active-hi edge 9 3 2 3 INT active-hi edge 9 4 2 4 INT active-lo level 9 5 2 5 INT active-hi edge 9 6 2 6 INT active-hi edge 9 7 2 7 INT active-hi edge 9 8 2 8 INT active-lo level 9 9 2 9 INT active-hi edge 9 10 2 10 INT active-hi edge 9 11 2 11 INT active-hi edge 9 12 2 12 INT active-lo level 9 13 2 13 INT active-hi edge 9 14 2 14 INT active-hi edge 9 15 2 15 -- Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID INT# ExtINT conforms conforms 9 0 255 0 NMI conforms conforms 9 0 255 1 ------------------------------------------------------------------------------- # SMP kernel config file options: # Required: options SMP # Symmetric MultiProcessor Kernel options APIC_IO # Symmetric (APIC) I/O # Useful: #options SMP_AUTOSTART # start the additional CPUs during boot # Optional (built-in defaults will work in most cases): #options NCPU=2 # number of CPUs #options NBUS=3 # number of busses #options NAPIC=1 # number of IO APICs #options NINTR=24 # number of INTs # Currently broken: #options SMP_PRIVPAGES # BROKEN, DO NOT use! # Rogue hardware: # # Tyan Tomcat II: #options SMP_TIMER_NC # # # SuperMicro P6DNE: #options SMP_TIMER_NC # ------------------------------------------------------------------------------- dmesg output: Copyright (c) 1992-1997 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.0-970618-SNAP #0: Wed Jun 18 09:19:12 GMT 1997 root@make.ican.net:/usr/src/sys/compile/GENERIC CPU: Pentium Pro (179.63-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x619 Stepping=9 Features=0xfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV> real memory = 16777216 (16384K bytes) avail memory = 14471168 (14132K bytes) eisa0: <CPQ579 (System Board)> Probing for devices on the EISA bus Probing for devices on PCI bus 0: chip0: <Intel 82440FX (Natoma) PCI and memory controller> rev 0x02 on pci0.0.0 chip1: <IBM 82351 PCI-PCI bridge> rev 0x01 on pci0.8.0 chip2: <Intel 82371SB PCI to ISA bridge> rev 0x01 on pci0.20.0 chip3: <Intel 82371SB IDE interface> rev 0x00 on pci0.20.1 Probing for devices on PCI bus 1: ncr0: <ncr 53c875 ultra wide scsi> rev 0x03 int a irq 9 on pci1.4.0 ncr0: waiting for scsi devices to settle scbus0 at ncr0 bus 0 scbus0 target 0 lun 0: WIDE SCSI (16 bit) enabledscbus0 target 0 lun 0: 10.0 MB/s (200 ns, offset 15) sd0 at scbus0 target 0 lun 0 sd0: <COMPAQ ST34371W 0388> type 0 fixed SCSI 2 sd0: Direct-Access sd0: 20.0 MB/s (100 ns, offset 15) 4094MB (8386000 512 byte sectors) scbus0 target 4 lun 0: WIDE SCSI (16 bit) enabledscbus0 target 4 lun 0: 10.0 MB/s (200 ns, offset 15) sd1 at scbus0 target 4 lun 0 sd1: <COMPAQ ST32171W 0388> type 0 fixed SCSI 2 sd1: Direct-Access sd1: 20.0 MB/s (100 ns, offset 15) 2006MB (4110000 512 byte sectors) vx0: <3COM 3C900 Etherlink XL PCI> rev 0x00 int a irq 9 on pci1.8.0 utp/aui/bnc[*utp*] address 00:60:97:25:ec:66 vga0: <VGA-compatible display device> rev 0x47 on pci1.9.0 Probing for devices on the ISA bus: sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <16 virtual consoles, flags=0x0> ed0 not found at 0x280 ed1 not found at 0x300 fe0 not found at 0x300 sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A sio2: disabled, not probed. sio3: disabled, not probed. lpt0 at 0x3bc-0x3c3 irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface lpt1 at 0x3bc-0x3c3 on isa lpt1 not probed due to I/O address conflict with lpt0 at 0x3bc mse0 not found at 0x23c psm0: disabled, not probed. fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: NEC 72065B fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (atapi): <HITACHI CDR-7930/1023>, removable, accel, dma, iordy wcd0: 1377Kb/sec, 128Kb cache, audio play, 255 volume levels, ejectable tray wcd0: no disc inside, unlocked wdc1 not found at 0x170 bt0 not found at 0x330 uha0 not found at 0x330 aha0 not found at 0x330 aic0 not found at 0x340 nca0 not found at 0x1f88 nca1 not found at 0x350 sea0 not found at 0xffff wt0 not found at 0x300 mcd0 not found at 0x300 matcdc0 not found at 0x230 scd0 not found at 0x230 ie0: unknown board_id: f000 ie0 not found at 0x300 ie1: unknown board_id: f000 ie1 not found at 0x360 ep0 not found at 0x300 ex0 not found le0 not found at 0x300 lnc0 not found at 0x280 ze0 not found at 0x300 zp0 not found at 0x300 npx0 on motherboard npx0: INT 16 interface apm0: disabled, not probed. changing root device to sd0a WARNING: / was not properly dismounted. =============================================================================== Uldis Mikelsons
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?33B8CFAC.6110>