Date: Mon, 02 Feb 2009 08:57:57 -0800 From: Sam Leffler <sam@freebsd.org> To: Subscriber <subscr1024@mail.ru> Cc: freebsd-current@freebsd.org Subject: Re: ath driver (?) lock system after last update Message-ID: <49872615.1040002@freebsd.org> In-Reply-To: <4986D59A.9080906@mail.ru> References: <498652D2.7030906@mail.ru> <49867969.3020406@freebsd.org> <4986D59A.9080906@mail.ru>
next in thread | previous in thread | raw e-mail | index | archive | help
Should be fixed by r188011. Sam Subscriber wrote: > Output of 'sysctl dev.ath': > > dev.ath.0.%desc: Atheros 5424/2424 > dev.ath.0.%driver: ath > dev.ath.0.%location: slot=0 function=0 > dev.ath.0.%pnpinfo: vendor=0x168c device=0x001c subvendor=0x1a3b > subdevice=0x1026 class=0x020000 > dev.ath.0.%parent: pci2 > dev.ath.0.smoothing_rate: 95 > dev.ath.0.sample_rate: 10 > dev.ath.0.sample_stats: 0 > dev.ath.0.countrycode: 0 > dev.ath.0.regdomain: 96 > dev.ath.0.slottime: 20 > dev.ath.0.acktimeout: 48 > dev.ath.0.ctstimeout: 48 > dev.ath.0.softled: 0 > dev.ath.0.ledpin: 0 > dev.ath.0.ledon: 0 > dev.ath.0.ledidle: 2700 > dev.ath.0.txantenna: 0 > dev.ath.0.rxantenna: 2 > dev.ath.0.diversity: 1 > dev.ath.0.txintrperiod: 5 > dev.ath.0.diag: 0 > dev.ath.0.tpscale: 0 > dev.ath.0.tpc: 0 > dev.ath.0.tpack: 63 > dev.ath.0.tpcts: 63 > dev.ath.0.rfsilent: 1 > dev.ath.0.rfkill: 1 > dev.ath.0.intmit: 1 > dev.ath.0.monpass: 24 > > I not changed sysctl setting for ath0 because of fine forking with > default settings on early drivers. > > > and how your card is configured. > What it means? Wireless network related rc.conf settings? > if_up_delay="1" > wlans_ath0=wlan0 > ifconfig_wlan0="WPA DHCP" > > I use FreeBSD 7.1 box with Atheros wi-fi card (don't remember exact > model, can see later if it need) as wireless AP (bridge). > > > Sam Leffler пишет: >> Subscriber wrote: >>> I updated my 8-CURRENT and now system freeze shortly after boot (~0.5-3 >>> minutes). I see following messages in console: >>> >>> Jan 31 02:18:03 cache kernel: ath0: bad series0 hwrate 0x0, tries 4 >>> ts_status 0x0 >>> Jan 31 02:18:03 cache kernel: ath0: bad series1 hwrate 0x0, tries 3 >>> ts_status 0x0 >>> Jan 31 02:18:03 cache kernel: ath0: bad series2 hwrate 0x0, tries 4 >>> ts_status 0x0 >>> Jan 31 02:18:03 cache kernel: ath0: bad series0 hwrate 0x0, tries 4 >>> ts_status 0x0 >>> Jan 31 02:18:03 cache kernel: ath0: bad series1 hwrate 0x0, tries 3 >>> ts_status 0x0 >>> Jan 31 02:18:03 cache kernel: ath0: bad series2 hwrate 0x0, tries 4 >>> ts_status 0x0 >>> Jan 31 02:18:03 cache kernel: ath0: bad series0 hwrate 0x0, tries 4 >>> ts_status 0x0 >>> Jan 31 02:18:03 cache kernel: ath0: bad series1 hwrate 0x0, tries 3 >>> ts_status 0x0 >>> Jan 31 02:18:03 cache kernel: ath0: bad series2 hwrate 0x0, tries 4 >>> ts_status 0x0 >>> ... >>> >>> much time, then system freeze. Before last update I was never see >>> those messages. >>> Now I rolled back to HEAD sources with date=2009.01.01, and all >>> seems OK. >> >> >>> ath0: <Atheros 5424/2424> mem 0xfd7f0000-0xfd7fffff irq 16 at device >>> 0.0 on pci2 >>> ath0: [ITHREAD] >>> ath0: WARNING: using obsoleted if_watchdog interface >>> ath0: mac 14.2 phy 7.0 radio 10.2 >> >> I need to see the output of sysctl dev.ath.0 and how your card is >> configured. >> >> Sam >> >> _______________________________________________ >> freebsd-current@freebsd.org mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-current >> To unsubscribe, send any mail to >> "freebsd-current-unsubscribe@freebsd.org" >> >> > > _______________________________________________ > freebsd-current@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to > "freebsd-current-unsubscribe@freebsd.org" > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?49872615.1040002>