Date: Thu, 08 Oct 2015 12:50:33 +0000 From: Konstantin Kulikov <k.kulikov2@gmail.com> To: =?UTF-8?B?SmVhbi1Tw6liYXN0aWVuIFDDqWRyb24=?= <jean-sebastien.pedron@dumbbell.fr>, freebsd-x11@freebsd.org Subject: Re: Testing the new i915 driver Message-ID: <CAD%2BeXGRWsdREJHeNZF-%2BQmAE5byXFHiHpK1HzdQzNLKyLELRuw@mail.gmail.com> In-Reply-To: <56161768.2000406@dumbbell.fr> References: <5615A42C.3080908@FreeBSD.org> <20151007231519.GA40844@mutt-hardenedbsd> <20151007233535.GB40844@mutt-hardenedbsd> <56161768.2000406@dumbbell.fr>
index | next in thread | previous in thread | raw e-mail
[-- Attachment #1 --]
Hello, Jean.
My setup is:
FreeBSD ns-232.nauka.net 10.2-RELEASE FreeBSD 10.2-RELEASE #0 r286666: Wed
Aug 12 15:26:37 UTC 2015
root@releng1.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC
amd64
# git show
commit aa4280f4c49b984346d761909412eb8aa67df8e0
Author: Jean-Sébastien Pédron <dumbbell@FreeBSD.org>
Date: Sun Sep 27 18:51:14 2015 +0200
Kernel built and booted ok, but driver doesn't work correctly:
Detected resolution was 1024x768, my monitor is 1920x1080.
Second monitor (connected with HDMI cable) didn't work at all.
/var/run/dmesg.boot and output of dmesg attached.
Thanks for your work on it.
On Thu, Oct 8, 2015 at 10:12 AM Jean-Sébastien Pédron <
jean-sebastien.pedron@dumbbell.fr> wrote:
> On 08.10.2015 01:35, Shawn Webb wrote:
> > On Wed, Oct 07, 2015 at 07:15:24PM -0400, Shawn Webb wrote:
> >> You. Are. Awesome!
> >>
> >> I'm going to try this on HardenedBSD 11-CURRENT tonight. I'll report
> >> back with whatever results I get.
>
> Thank you very much :)
>
> > I got this error when doing buildkernel:
> >
> >
> /usr/src/sys/modules/drm2/i915kms/../../../dev/drm2/i915/i915_gem_execbuffer.c:861:9:
> error: use of undeclared label 'pre_struct_lock_err'
> > goto pre_struct_lock_err;
>
> I don't have this label in my local copy. How did you generate the patch?
>
> --
> Jean-Sébastien Pédron
>
>
[-- Attachment #2 --]
error: [drm:pid6:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
error: [drm:pid6:i915_gem_object_unbind] *ERROR* Attempting to unbind pinned buffer
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...0 0 0 0 0 0 done
All buffers synced.
Uptime: 8d1h2m6s
Copyright (c) 1992-2015 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-CURRENT #0 aa4280f(drm-i915-update-38): Thu Oct 8 12:12:19 MSK 2015
root@ns-232.nauka.net:/usr/obj/usr/src-graphics/sys/GENERIC amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
WARNING: WITNESS option enabled, expect reduced performance.
VT(vga): text 80x25
CPU: Intel(R) Pentium(R) CPU G850 @ 2.90GHz (2893.49-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xd9ae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,TSCDLT,XSAVE,OSXSAVE>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 4294967296 (4096 MB)
avail memory = 3993047040 (3808 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80eb8520, 0) error 19
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <ALASKA A M I> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
Event timer "HPET5" frequency 14318180 Hz quality 440
Event timer "HPET6" frequency 14318180 Hz quality 440
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xfe000000-0xfe3fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0
agp0: <SandyBridge desktop GT1 IG> on vgapci0
agp0: aperture size is 256M, detected 65532k stolen memory
vgapci0: Boot video device
pci0: <simple comms> at device 22.0 (no driver attached)
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe407000-0xfe4073ff irq 23 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
hdac0: <Intel Cougar Point HDA Controller> mem 0xfe400000-0xfe403fff irq 22 at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pci4: <ACPI PCI bus> on pcib4
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xd0004000-0xd0004fff,0xd0000000-0xd0003fff irq 17 at device 0.0 on pci4
re0: Using 1 MSI-X message
re0: Chip rev. 0x2c800000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address:
re0: netmap queues/slots: TX 1/256, RX 1/256
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe406000-0xfe4063ff irq 23 at device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Cougar Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xfe405000-0xfe4057ff irq 20 at device 31.2 on pci0
ahci0: AHCI v1.30 with 4 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_button0: <Power Button> on acpi0
orm0: <ISA Option ROM> at iomem 0xce800-0xcf7ff on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
usbus0: 480Mbps High Speed USB v2.0
ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
hdacc0: <VIA VT1708S_0 HDA CODEC> at cad 0 on hdac0
hdaa0: <VIA VT1708S_0 Audio Function Group> at nid 1 on hdacc0
pcm0: <VIA VT1708S_0 (Analog 2.0+HP/2.0)> at nid 28,29 and 26,30,27 on hdaa0
pcm1: <VIA VT1708S_0 (Digital)> at nid 32 on hdaa0
usbus1: 480Mbps High Speed USB v2.0
ugen1.1: <Intel> at usbus1
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen0.1: <Intel> at usbus0
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ses0 at ahciem0 bus 0 scbus4 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <WDC WD2500AAKX-001CA0 15.01H15> ATA8-ACS SATA 3.x device
ada0: Serial Number WD-WMAYW1701402
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 238475MB (488397168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <Corsair Force 3 SSD 5.05> ATA8-ACS SATA 3.x device
ada1: Serial Number 141079070FF017190005
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 85857MB (175836528 512 byte sectors: 16H 63S/T 16383C)
ada1: quirks=0x1<4K>
ada1: Previously was known as ad6
SMP: AP CPU #1 Launched!
Timecounter "TSC-low" frequency 1446746178 Hz quality 1000
WARNING: WITNESS option enabled, expect reduced performance.
Root mount waiting for: usbus1 usbus0
uhub1: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
random: unblocking device.
Root mount waiting for: usbus1 usbus0
ugen0.2: <vendor 0x8087> at usbus0
uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
Root mount waiting for: usbus1 usbus0
uhub2: 4 ports with 4 removable, self powered
uhub3: 6 ports with 6 removable, self powered
ugen1.3: <Logitech> at usbus1
ukbd0: <Logitech Logitech G710 Keyboard, class 0/0, rev 2.00/80.00, addr 3> on usbus1
kbd2 at ukbd0
ukbd1: <Logitech Logitech G710 Keyboard, class 0/0, rev 2.00/80.00, addr 3> on usbus1
kbd3 at ukbd1
Root mount waiting for: usbus1
ugen1.4: <Corsair> at usbus1
ukbd2: <Corsair Corsair M65 Gaming Mouse, class 0/0, rev 2.00/2.26, addr 4> on usbus1
kbd4 at ukbd2
Trying to mount root from zfs:data/root []...
info: [drm] Initialized drm 1.1.0 20060810
[drm:pid153:drm_probe_helper] drmn0 desc: Intel SandyBridge
drmn0: <Intel SandyBridge> on vgapci0
[drm:pid153:drm_get_pci_dev]
[drm:pid153:drm_ctxbitmap_next] bit : 0
[drm:pid153:drm_ctxbitmap_init] drm_ctxbitmap_init : 0
[drm:pid153:drm_get_minor]
[drm:pid153:drm_get_minor] new minor assigned 64
[drm:pid153:drm_get_minor]
[drm:pid153:drm_get_minor] new minor assigned 0
[drm:KMS:pid153:i915_dump_device_info] i915 device info: gen=6, pciid=0x0102 flags=need_gfx_hws,has_force_wake,has_hotplug,has_bsd_ring,has_blt_ring,has_llc,info: [drm] Memory usable by graphics device = 2048M
[drm:KMS:pid153:i915_gem_gtt_init] GMADR size = 256M
[drm:KMS:pid153:i915_gem_gtt_init] GTT stolen size = 64M
[drm:pid153:drm_addmap_core] offset = 0xfe000000, size = 0x00200000, type = 1
[drm:KMS:pid153:intel_detect_pch] Found CougarPoint PCH
iicbus0: <Philips I2C bus> on iicbb0 addr 0xff
iic0: <I2C generic I/O> on iicbus0
iic1: <I2C generic I/O> on iicbus1
iicbus2: <Philips I2C bus> on iicbb1 addr 0xff
iic2: <I2C generic I/O> on iicbus2
iic3: <I2C generic I/O> on iicbus3
iicbus4: <Philips I2C bus> on iicbb2 addr 0xff
iic4: <I2C generic I/O> on iicbus4
iic5: <I2C generic I/O> on iicbus5
iicbus6: <Philips I2C bus> on iicbb3 addr 0xff
iic6: <I2C generic I/O> on iicbus6
iic7: <I2C generic I/O> on iicbus7
iicbus8: <Philips I2C bus> on iicbb4 addr 0xff
iic8: <I2C generic I/O> on iicbus8
iic9: <I2C generic I/O> on iicbus9
iicbus10: <Philips I2C bus> on iicbb5 addr 0xff
iic10: <I2C generic I/O> on iicbus10
iic11: <I2C generic I/O> on iicbus11
[drm:pid153:intel_opregion_setup] graphic opregion physical addr: 0xbad84018
[drm:pid153:intel_opregion_setup] Public ACPI methods supported
[drm:pid153:intel_opregion_setup] SWSCI supported
[drm:pid153:intel_opregion_setup] ASLE supported
[drm:pid153:drm_pci_enable_msi] MSI count = 1
info: [drm] MSI enabled 1 message(s)
info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
info: [drm] Driver supports precise vblank timestamp query.
[drm:KMS:pid153:init_vbt_defaults] Set default to SSC at 100MHz
[drm:KMS:pid153:intel_parse_bios] Using VBT from OpRegion: $VBT SNB/IVB-DESKTOPd
[drm:KMS:pid153:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120 display_clock_mode 0 fdi_rx_polarity_inverted 0
[drm:KMS:pid153:parse_general_definitions] crt_ddc_bus_pin: 2
[drm:KMS:pid153:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
[drm:KMS:pid153:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
[drm:KMS:pid153:parse_lfp_panel_data] VBT initial LVDS value 300
[drm:KMS:pid153:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables:
[drm:KMS:pid153:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
[drm:KMS:pid153:parse_sdvo_device_mapping] No SDVO device info is found in VBT
[drm:KMS:pid153:intel_modeset_init] 2 display pipes available.
[drm:KMS:pid153:intel_lvds_init] LVDS is not present in VBT
[drm:KMS:pid153:intel_dp_i2c_init] i2c_init DPDDC-D
[drm:KMS:pid153:intel_dp_aux_ch] dp_aux_ch timeout status 0x5143003f
[drm:KMS:pid153:intel_dp_i2c_aux_ch] aux_ch failed -60
[drm:KMS:pid153:intel_dp_aux_ch] dp_aux_ch timeout status 0x5143003f
[drm:KMS:pid153:intel_dp_i2c_aux_ch] aux_ch failed -60
[drm:KMS:pid153:ironlake_init_pch_refclk] has_panel 0 has_lvds 0 has_pch_edp 0 has_cpu_edp 0 has_ck505 0
[drm:KMS:pid153:ironlake_init_pch_refclk] Disabling SSC entirely
drmn0: taking over the fictitious range 0xc0000000-0xd0000000
[drm:KMS:pid153:init_status_page] render ring hws offset: 0x00000000
[drm:KMS:pid153:init_status_page] bsd ring hws offset: 0x00022000
[drm:KMS:pid153:init_status_page] blitter ring hws offset: 0x00043000
[drm:KMS:pid153:create_default_context] Default HW context loaded
[drm:KMS:pid153:i915_gem_context_init] HW context support initialized
[drm:KMS:pid153:intel_modeset_setup_hw_state] [CRTC:3] hw state readout: enabled
[drm:KMS:pid153:intel_modeset_setup_hw_state] [CRTC:5] hw state readout: disabled
[drm:KMS:pid153:intel_modeset_setup_hw_state] [ENCODER:8:DAC-8] hw state readout: enabled, pipe=0
[drm:KMS:pid153:intel_modeset_setup_hw_state] [ENCODER:9:TMDS-9] hw state readout: disabled, pipe=0
[drm:KMS:pid153:intel_modeset_setup_hw_state] [ENCODER:13:TMDS-13] hw state readout: disabled, pipe=0
[drm:KMS:pid153:intel_modeset_setup_hw_state] [CONNECTOR:7:VGA-1] hw state readout: enabled
[drm:KMS:pid153:intel_modeset_setup_hw_state] [CONNECTOR:10:HDMI-A-1] hw state readout: disabled
[drm:KMS:pid153:intel_modeset_setup_hw_state] [CONNECTOR:14:DP-1] hw state readout: disabled
[drm:KMS:pid153:intel_connector_check_state] [CONNECTOR:7:VGA-1]
[drm:KMS:pid153:intel_modeset_check_state] [ENCODER:8:DAC-8]
[drm:KMS:pid153:intel_modeset_check_state] [ENCODER:9:TMDS-9]
[drm:KMS:pid153:intel_modeset_check_state] [ENCODER:13:TMDS-13]
[drm:KMS:pid153:intel_modeset_check_state] [CRTC:3]
[drm:KMS:pid153:intel_modeset_check_state] [CRTC:5]
[drm:KMS:pid153:intel_crt_reset] pch crt adpa set to 0x80f40010
[drm:pid153:drm_irq_install] irq=267
info: [drm] Connector VGA-1: get mode from tunables:
info: [drm] - kern.vt.fb.modes.VGA-1
info: [drm] - kern.vt.fb.default_mode
info: [drm] Connector HDMI-A-1: get mode from tunables:
info: [drm] - kern.vt.fb.modes.HDMI-A-1
info: [drm] - kern.vt.fb.default_mode
info: [drm] Connector DP-1: get mode from tunables:
info: [drm] - kern.vt.fb.modes.DP-1
info: [drm] - kern.vt.fb.default_mode
[drm:KMS:pid153:drm_helper_probe_single_connector_modes] [CONNECTOR:7:VGA-1]
[drm:KMS:pid153:intel_ironlake_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0x83f40010
[drm:KMS:pid153:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0x83f40010, result 1
[drm:KMS:pid153:intel_crt_detect] CRT detected via hotplug
[drm:KMS:pid153:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error -2
[drm:KMS:pid153:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error -2
[drm:KMS:pid153:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error -2
[drm:KMS:pid153:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error -2
[drm:KMS:pid153:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error -2
[drm:KMS:pid153:drm_helper_probe_single_connector_modes] [CONNECTOR:7:VGA-1] probed modes :
[drm:KMS:pid153:drm_mode_debug_printmodeline] Modeline 19:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:KMS:pid153:drm_mode_debug_printmodeline] Modeline 17:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:KMS:pid153:drm_mode_debug_printmodeline] Modeline 16:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[drm:KMS:pid153:drm_mode_debug_printmodeline] Modeline 18:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
[drm:KMS:pid153:drm_mode_debug_printmodeline] Modeline 15:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa
[drm:KMS:pid153:drm_helper_probe_single_connector_modes] [CONNECTOR:10:HDMI-A-1]
[drm:KMS:pid153:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error -2
[drm:KMS:pid153:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error -2
[drm:KMS:pid153:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error -2
[drm:KMS:pid153:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error -2
[drm:KMS:pid153:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error -2
[drm:KMS:pid153:drm_helper_probe_single_connector_modes] [CONNECTOR:10:HDMI-A-1] disconnected
[drm:KMS:pid153:drm_helper_probe_single_connector_modes] [CONNECTOR:14:DP-1]
[drm:KMS:pid153:intel_dp_aux_ch] dp_aux_ch timeout status 0x5143003f
[drm:KMS:pid153:intel_dp_aux_ch] dp_aux_ch timeout status 0x5143003f
[drm:KMS:pid153:intel_dp_aux_ch] dp_aux_ch timeout status 0x5143003f
[drm:KMS:pid153:intel_dp_detect] DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[drm:KMS:pid153:drm_helper_probe_single_connector_modes] [CONNECTOR:14:DP-1] disconnected
[drm:KMS:pid153:drm_setup_crtcs]
[drm:KMS:pid153:drm_enable_connectors] connector 7 enabled? yes
[drm:KMS:pid153:drm_enable_connectors] connector 10 enabled? no
[drm:KMS:pid153:drm_enable_connectors] connector 14 enabled? no
[drm:KMS:pid153:drm_target_preferred] looking for cmdline mode on connector 7
[drm:KMS:pid153:drm_target_preferred] looking for preferred mode on connector 7
[drm:KMS:pid153:drm_target_preferred] found mode 1024x768
[drm:KMS:pid153:drm_setup_crtcs] picking CRTCs for 8192x8192 config
[drm:KMS:pid153:drm_setup_crtcs] desired mode 1024x768 set on crtc 3
[drm:KMS:pid153:intelfb_create] allocated 1024x768 (s 24bits) fb: 0x00072000, bo 0xfffff80008634000
fbd0 on drmn0
VT: Replacing driver "vga" with new "fb".
[drm:KMS:pid0:intel_crtc_set_config] [CRTC:3] [FB:21] #connectors=1 (x y) (0 0)
[drm:KMS:pid0:intel_set_config_compute_mode_changes] crtc has no fb, full mode set
[drm:KMS:pid0:intel_set_config_compute_mode_changes] modes are different, full mode set
[drm:KMS:pid0:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[drm:KMS:pid0:drm_mode_debug_printmodeline] Modeline 20:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:KMS:pid0:intel_modeset_stage_output_state] [CONNECTOR:7:VGA-1] to [CRTC:3]
[drm:KMS:pid0:intel_crtc_set_config] attempting to set mode from userspace
[drm:KMS:pid0:drm_mode_debug_printmodeline] Modeline 20:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:KMS:pid0:intel_set_mode] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[drm:KMS:pid0:intel_modeset_adjusted_mode] [CRTC:3]
[drm:pid0:drm_calc_vbltimestamp_from_scanoutpos] crtc 0: Noop due to uninitialized mode.
info: [drm] Initialized i915 1.6.0 20080730 for drmn0 on minor 0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
fuse-freebsd: version 0.4.4, FUSE ABI 7.8
[drm:pid0:drm_vblank_get] enabling vblank on crtc 0, ret: -22
[drm:KMS:pid0:intel_choose_pipe_bpp_dither] setting pipe bpc to 8 (max display bpc 8)
[drm:KMS:pid0:ironlake_crtc_mode_set] Mode for pipe 0:
[drm:KMS:pid0:drm_mode_debug_printmodeline] Modeline 20:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:KMS:pid0:intel_get_pch_pll] CRTC:3 allocated PCH PLL c6014
[drm:KMS:pid0:intel_get_pch_pll] using pll 0 for pipe 0
[drm:KMS:pid0:intel_get_pch_pll] switching PLL c6014 off
[drm:KMS:pid0:ironlake_check_fdi_lanes] checking fdi config on pipe 0, lanes 1
[drm:KMS:pid0:ironlake_wait_for_vblank] vblank wait timed out
[drm:KMS:pid0:ironlake_update_plane] Writing base 00072000 00000000 0 0 4096
[drm:KMS:pid0:intel_crtc_mode_set] [ENCODER:8:DAC-8] set [MODE:20:1024x768]
[drm:KMS:pid0:sandybridge_update_wm] FIFO watermarks For pipe A - plane 5, cursor: 6
[drm:KMS:pid0:ironlake_check_srwm] watermark 1: display plane 9, fbc lines 3, cursor 6
[drm:KMS:pid0:ironlake_check_srwm] watermark 2: display plane 11, fbc lines 3, cursor 6
[drm:KMS:pid0:ironlake_check_srwm] watermark 3: display plane 47, fbc lines 3, cursor 6
[drm:KMS:pid0:ironlake_wait_for_vblank] vblank wait timed out
[drm:KMS:pid0:ironlake_wait_for_vblank] vblank wait timed out
[drm:KMS:pid0:gen6_fdi_link_train] FDI_RX_IIR 0x700
[drm:KMS:pid0:gen6_fdi_link_train] FDI train 1 done.
[drm:KMS:pid0:gen6_fdi_link_train] FDI_RX_IIR 0x600
[drm:KMS:pid0:gen6_fdi_link_train] FDI train 2 done.
[drm:KMS:pid0:gen6_fdi_link_train] FDI train done.
[drm:KMS:pid0:ironlake_enable_pch_pll] enable PCH PLL c6014 (active 0, on? 0)for crtc 3
[drm:KMS:pid0:ironlake_enable_pch_pll] enabling PCH PLL c6014
[drm:pid0:drm_calc_timestamping_constants] crtc 3: hwmode: htotal 1344, vtotal 806, vdisplay 768
[drm:pid0:drm_calc_timestamping_constants] crtc 3: clock 65000 kHz framedur 16664856 linedur 20676, pixeldur 15
[drm:KMS:pid0:intel_connector_check_state] [CONNECTOR:7:VGA-1]
[drm:KMS:pid0:intel_modeset_check_state] [ENCODER:8:DAC-8]
[drm:KMS:pid0:intel_modeset_check_state] [ENCODER:9:TMDS-9]
[drm:KMS:pid0:intel_modeset_check_state] [ENCODER:13:TMDS-13]
[drm:KMS:pid0:intel_modeset_check_state] [CRTC:3]
[drm:KMS:pid0:intel_modeset_check_state] [CRTC:5]
[drm:KMS:pid0:intel_crtc_set_config] [CRTC:5] [NOFB]
[drm:KMS:pid0:intel_modeset_stage_output_state] [CONNECTOR:7:VGA-1] to [CRTC:3]
[drm:KMS:pid0:intel_enable_rc6] Sandybridge: deep RC6 disabled
info: [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
re0: link state changed to DOWN
re0: link state changed to UP
ums0: <Corsair Corsair M65 Gaming Mouse, class 0/0, rev 2.00/2.26, addr 4> on usbus1
ums0: 16 buttons and [XYZ] coordinates ID=0
uhid0: <Corsair Corsair M65 Gaming Mouse, class 0/0, rev 2.00/2.26, addr 4> on usbus1
\000
help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAD%2BeXGRWsdREJHeNZF-%2BQmAE5byXFHiHpK1HzdQzNLKyLELRuw>