Date: Wed, 23 Oct 2002 21:39:29 +0100 From: ian j hart <ianjhart@ntlworld.com> To: Mike Tancsa <mike@sentex.net> Cc: Semen Ustimenko <semenu@FreeBSD.ORG>, stable@FreeBSD.ORG Subject: Re: cvs commit: src/sys/dev/mii acphy.c Message-ID: <3DB70901.2F3FC6F9@ntlworld.com> References: <5.1.1.6.0.20021023112517.05e18a38@marble.sentex.ca>
next in thread | previous in thread | raw e-mail | index | archive | help
Mike Tancsa wrote:
>
> Hi,
> I noticed that on 2 boxes which were 4.7RC-1 going to stable as of this
> morning, do not work with DHCP assigned addresses.
>
> The nic is
>
> rl0: <RealTek 8139 10/100BaseTX> port 0xdc00-0xdcff mem
> 0xe1c10000-0xe1c100ff irq 12 at device 9.0 on pci0
> rl0: Ethernet address: 00:50:fc:56:8a:7c
> miibus0: <MII bus> on rl0
> rlphy0: <RealTek internal media interface> on miibus0
> rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>
> (i.e. /etc/rc.conf has ifconfig_rl0="DHCP")
>
> I doubled checked to make sure /etc was properly updated and it seems to be
> the case.
>
> I know with the realteks I have used, until an IP address is given to them
> to "up" the interface, they see the link as being down. Not even sure if
> the commit below has anything to do with it but thought I would start here
> as it seems to be possibly related.
>
> Can anyone confirm that DHCP assigned addresses are working for you on
> STABLE as of today or yesterday ?
>
> ---Mike
>
> At 02:20 PM 21/10/2002 -0700, Semen Ustimenko wrote:
> >semenu 2002/10/21 14:20:19 PDT
> >
> > Modified files: (Branch: RELENG_4)
> > sys/dev/mii acphy.c
> > Log:
> > MFC v1.8: MII_TICK needs not restart autonegotiation, the chip behaves
> > pretty well by itself. Slightly rearrange the code to make diff to
> > -current smaller.
> >
> > Revision Changes Path
> > 1.2.2.2 +20 -46 src/sys/dev/mii/acphy.c
> >
> >To Unsubscribe: send mail to majordomo@FreeBSD.org
> >with "unsubscribe cvs-all" in the body of the message
>
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-stable" in the body of the message
Works for me(TM).
%ifconfig
rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::200:b4ff:fe91:c482%rl0 prefixlen 64 scopeid 0x1
inet 192.168.0.3 netmask 0xffff0000 broadcast 192.168.255.255
ether 00:00:b4:91:c4:82
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
Is this the same problem as "rl media detect failure during boot"?
--
ian j hart
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3DB70901.2F3FC6F9>