Date: Thu, 12 Jul 2001 18:50:43 -0500 From: Steve Price <steve@havk.org> To: Bill Paul <wpaul@FreeBSD.ORG> Cc: hardware@freebsd.org Subject: Re: Driver for D-Link DWL-650 card? Message-ID: <20010712185043.Y75539@bsd.havk.org> In-Reply-To: <20010712183458.X75539@bsd.havk.org>; from steve@havk.org on Thu, Jul 12, 2001 at 06:34:58PM -0500 References: <4.3.2.7.2.20010712011741.046013b0@localhost> <20010712204350.9DB3237B401@hub.freebsd.org> <20010712183458.X75539@bsd.havk.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, Jul 12, 2001 at 06:34:58PM -0500, Steve Price wrote: > > Is there any special trick to get one running? Attached the > dmesg output. When I try to fire-up pccardd I'm greeted with > this message: To follow up on my own post here are the differences before I put the card in and after. I went from 4.3-RC to today's -stable and I had to remove a Dual Intel NIC because I didn't have an extra PCI slot. Could the missing pcib4 and pci4 be related to the problem? --- dmesg.yesterday Fri May 4 02:00:21 2001 +++ /tmp/dmesg.out Thu Jul 12 18:30:28 2001 @@ -1,15 +1,15 @@ Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. -FreeBSD 4.3-RC #0: Fri Apr 6 18:16:49 CDT 2001 - root@tucker.dogbark.com:/usr/src/sys/compile/tucker +FreeBSD 4.3-STABLE #0: Thu Jul 12 17:48:53 CDT 2001 + root@tucker.dogbark.com:/usr/src/sys/compile/GENERIC Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (596.92-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x681 Stepping = 1 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 1073676288 (1048512K bytes) -avail memory = 1040982016 (1016584K bytes) -Preloaded elf kernel "kernel" at 0xc044b000. +avail memory = 1041305600 (1016900K bytes) +Preloaded elf kernel "kernel" at 0xc045e000. Pentium Pro MTRR support enabled md0: Malloc disk npx0: <math processor> on motherboard @@ -20,18 +20,15 @@ pci1: <PCI bus> on pcib2 pcib3: <PCI to PCI bridge (vendor=1011 device=0023)> at device 15.0 on pci1 pci2: <PCI bus> on pcib3 -pcib4: <DEC 21152 PCI-PCI bridge> at device 7.0 on pci2 -pci3: <PCI bus> on pcib4 -fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x3000-0x301f mem 0xf4200000-0xf42fffff,0xfc000000-0xfc000fff irq 5 at device 4.0 on pci3 -fxp0: Ethernet address 00:d0:b7:81:c1:82 -fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0x3020-0x303f mem 0xf4300000-0xf43fffff,0xfc001000-0xfc001fff irq 11 at device 5.0 on pci3 -fxp1: Ethernet address 00:d0:b7:81:c1:83 +pcic-pci0: <Ricoh RL5C475 PCI-CardBus Bridge> irq 0 at device 7.0 on pci2 ahc0: <Adaptec aic7896/97 Ultra2 SCSI adapter> port 0x2000-0x20ff mem 0xf4100000-0xf4100fff irq 11 at device 12.0 on pci0 aic7896/97: Wide Channel A, SCSI Id=7, 32/255 SCBs ahc1: <Adaptec aic7896/97 Ultra2 SCSI adapter> port 0x2400-0x24ff mem 0xf4101000-0xf4101fff irq 11 at device 12.1 on pci0 aic7896/97: Wide Channel B, SCSI Id=7, 32/255 SCBs -fxp2: <Intel Pro 10/100B/100+ Ethernet> port 0x2800-0x283f mem 0xf4000000-0xf40fffff,0xf4102000-0xf4102fff irq 10 at device 14.0 on pci0 -fxp2: Ethernet address 00:90:27:f6:8d:05 +fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x2800-0x283f mem 0xf4000000-0xf40fffff,0xf4102000-0xf4102fff irq 10 at device 14.0 on pci0 +fxp0: Ethernet address 00:90:27:f6:8d:05 +inphy0: <i82555 10/100 media interface> on miibus0 +inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: <Intel 82371AB PCI to ISA bridge> at device 18.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0x2860-0x286f at device 18.1 on pci0 @@ -45,7 +42,8 @@ chip1: <Intel 82371AB Power management controller> port 0x1040-0x104f at device 18.3 on pci0 pci0: <Cirrus Logic GD5480 SVGA controller> at 20.0 pcib1: <Intel 82443GX host to AGP bridge> on motherboard -pci4: <PCI bus> on pcib1 +pci3: <PCI bus> on pcib1 +orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc87ff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010712185043.Y75539>