Date: Sat, 5 Mar 2005 13:36:33 -0800 (PST) From: David Moler <dbmoler@yahoo.com> To: Arne "Wörner" <arne_woerner@yahoo.com>, freebsd-multimedia@freebsd.org Subject: Re: amd64 / bktr Message-ID: <20050305213633.32608.qmail@web51109.mail.yahoo.com> In-Reply-To: 6667
next in thread | raw e-mail | index | archive | help
I tried removing this section and recompiling the
kernel:
if (card == CARD_MIRO && mt2032_init(bktr) ==
0) {
bktr->card = cards[ (card =
CARD_PINNACLE_PCTV_RAVE) ];
select_tuner( bktr, TUNER_MT2032 );
goto checkDBX;
}
I also tried setting hw.bt848.tuner=1. I get the same
result. Perhaps this is a problem with mplayer?
--- Arne Wörner <arne_woerner@yahoo.com> wrote:
> --- David Moler <dbmoler@yahoo.com> wrote:
> > %dmesg |grep bktr
> > bktr0: <BrookTree 878> mem 0xfa002000-0xfa002fff
> irq
> > 18 at device 12.0 on pci0
> > bktr0: Warning - card vendor 0x1002 (model 0x0001)
> > unknown.
> > bktr0: MT2032: Companycode=3c3c Part=3c
> Revision=3c
> > bktr0: MT2032 not found or unknown type
> > bktr0: Detected a MSP3430G-A4 at 0x80
> > bktr0: Pinnacle/Miro TV, Temic NTSC tuner,
> msp3400c
> > stereo.
> >
> > These lines are in the kernel:
> > device bktr
> > device iicbus
> > device iicbb
> > device smbus
> >
> Looks ok...
>
> Maybe the changes about MicroTune MT2032 tuners
> ruined the support
> for your card.
>
> Could you try to set the tuner in /boot/loader.conf
> manually?
> hw.bt848.tuner=1
> or so?
>
> If that does not help, you could try to remove the
> mt2032 stuff
> from /sys/dev/bktr/bktr_card.c and recompile your
> kernel.
>
> Since I asked for the changes for my Pinnacle PCTV
> Rave card after
> R5.3, I am quite interested in solving the problems
> I might have
> caused... :-)
>
> -Arne
>
>
>
>
>
> __________________________________
> Celebrate Yahoo!'s 10th Birthday!
> Yahoo! Netrospective: 100 Moments of the Web
> http://birthday.yahoo.com/netrospective/
>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050305213633.32608.qmail>