Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 1 Feb 1999 20:14:16 -0900 (AKST)
From:      Mike Endsley <al7oj@customcpu.com>
To:        multimedia@FreeBSD.ORG
Cc:        Luigi Rizzo <luigi@labinfo.iet.unipi.it>
Subject:   Re: cs4237b and audio problems (fwd)
Message-ID:  <Pine.BSF.4.05.9902012012450.482-100000@FreeBSDrulz>

next in thread | raw e-mail | index | archive | help

Forgot to cc this. Also, here is my dmesg, if it helps:

Copyright (c) 1992-1998 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California. All rights reserved.
FreeBSD 3.0-RELEASE #11: Sat Jan 30 18:42:27 AKST 1999
    root@FreeBSDrulz:/usr/src/sys/compile/MYKERNEL
Timecounter "i8254"  frequency 1193182 Hz  cost 1450 ns
Timecounter "TSC"  frequency 233288011 Hz  cost 98 ns
CPU: AMD-K6tm w/ multimedia extensions (233.29-MHz 586-class CPU)
  Origin = "AuthenticAMD"  Id = 0x562  Stepping=2
  Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory  = 67108864 (65536K bytes)
avail memory = 63254528 (61772K bytes)
Probing for devices on PCI bus 0:
chip0: <Host to PCI bridge (vendor=10b9 device=1531)> rev 0xb2 on pci0.0.0
chip1: <PCI to ISA bridge (vendor=10b9 device=1533)> rev 0x07 on pci0.2.0
vga0: <ATI model 4755 graphics accelerator> rev 0x9a on pci0.4.0
ide_pci0: <PCI IDE controller (busmaster capable)> rev 0x20 int a irq 255 on pci0.11.0
Probing for PnP devices:
CSN 1 Vendor ID: CSC8037 [0x3780630e] Serial 0xffffffff Comp ID: @@@0000 [0x00000000]
mss_attach <CS4237>1 at 0x530 irq 5 dma 1:3 flags 0x13
pcm1 (CS423x/Yamaha <CS4237> sn 0xffffffff) at 0x530-0x537 irq 5 drq 1 flags 0x13 on isa
CSN 2 Vendor ID: BDP3336 [0x36339008] Serial 0x0f8c5050 Comp ID: @@@0000 [0x00000000]
sio4: type 16550A
sio4 (siopnp <BDP3336> sn 0x0f8c5050) at 0x3f8-0x3ff irq 4 on isa
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
sio0 not probed due to I/O address conflict with sio4 at 0x3f8
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
psm0 at 0x60-0x64 irq 12 on motherboard
psm0: model Generic PS/2 mouse, device ID 0
pcm0 not probed due to drq conflict with pcm1 at 1
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <Maxtor 83240D3>
wd0: 3090MB (6328665 sectors), 6697 cyls, 15 heads, 63 S/T, 512 B/S
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 1 (atapi): <CD-ROM 24X/AKOx/17B>, removable, intr, dma, iordy
wcd0: 4125Kb/sec, 120Kb cache, audio play, 255 volume levels, ejectable tray
wcd0: 120mm audio disc loaded, unlocked
npx0 on motherboard
npx0: INT 16 interface
changing root device to wd0s2a
 


---------- Forwarded message ----------
Date: Mon, 1 Feb 1999 16:28:34 -0900 (AKST)
From: Mike Endsley <al7oj@customcpu.com>
X-Sender: al7oj@FreeBSDrulz
To: Luigi Rizzo <luigi@labinfo.iet.unipi.it>
Subject: Re: cs4237b and audio problems (fwd)
In-Reply-To: <3.0.5.32.19990201101941.007d6910@customcpu.com>
Message-ID: <Pine.BSF.4.05.9902011625480.278-100000@FreeBSDrulz>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

I guess I have looked too long and am getting confused :(
since "cat /dev/sndstat' shows that I have pcm1, I then cd /dev and made
my symlinks as such:
ln -s audio2 audio, etc.
Now what am I missing?  It is something probably simple, right? :)
Mike

On Mon, 1 Feb 1999, Luigi Rizzo wrote:

> > I can't get my Crystal CS4237b card to work.
> > I made the symlinks in /dev as mentioned in (4)pcm.
> > I use the following in userconfig:
> > pnp 1 0 os enable port0 534 port2 0x220 irq0 5 drq0 1 drq1 3
> > 
> > cat /dev/sndstat shows:
> > FreeBSD Audio Driver (981002) ...
> > Installed devices:
> > pcm1: <cs4237b> at 0x530 irq 5 dma 1:3
> > 
> > showaudio says something about not configured on this system would I like
> > to write it to file
> 
> read that something again. it should tell you that you are trying to
> use unit0 while you have only unit#1
> 
> 	luigi
> 
> > I have pnp and pcm0 configured in my kernel.
> > When running KDE (from 3.0-R), kscd crashes. The icon shows up for about 2
> > seconds, then disappears, and I am left with kscd.core
> > What am I missing?
> > Thanks,
> > Mike
> >  
 
----------------------------------------------------------------------------
What part of the term "operating system" doesn't Bill Gates understand?
I have/run:
Un*x (FreeBSD) Linux (Slakware, Debian1.3 and 2.0), OS/2Warp3.0, win*

al7oj@customcpu.com   al7oj@al7oj.#nak.ak.usa.noam   al7oj@al7oj.ampr.org
http://www.customcpu.com/personal/al7oj/
----------------------------------------------------------------------------





To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-multimedia" in the body of the message



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.05.9902012012450.482-100000>