Date: Thu, 5 Feb 2004 20:21:13 -0000 From: "Jimmy Firewire" <trigonometric@softhome.net> To: "Kris Kennaway" <kris@obsecurity.org> Cc: freebsd-current@freebsd.org Subject: Re: RSA/DSA Host key generation didn't happen Message-ID: <01a201c3ec25$9a7156d0$0601a8c0@SPECULUSHX1THE> References: <00d901c3ec11$5a600ff0$0601a8c0@SPECULUSHX1THE> <20040205183346.GA18731@xor.obsecurity.org>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. ------=_NextPart_000_019F_01C3EC25.9A07E6A0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit On Thu, Feb 05, 2004 at 05:56:17PM -0000, Jimmy Firewire wrote: >> Did anyone else find that on 5.2-RELEASE, that the RSA and DSA host keys >> were not generated on first boot, as happens on other distros? Could this >> possibly be related to the DHCP/resolve.conf issue mentioned a while back: >> >> http://makeashorterlink.com/?A5D921F47 >> >> I also experienced some strange DHCP problem. ----- Original Message ----- From: "Kris Kennaway" <kris@obsecurity.org> To: "Jimmy Firewire" <trigonometric@softhome.net> Cc: <freebsd-current@freebsd.org> Sent: Thursday, February 05, 2004 6:33 PM Subject: Re: RSA/DSA Host key generation didn't happen >Unlikely, unless there's something deeper going on. >it would help if you could provide a log showing what the boot scripts >are doing during the first boot. OK, I just installed it again on a different partition. I have attached the output from dmesg. Is this what you wanted? Is there some other way I should have taken more logs? I have just confirmed that on this box, it does not even attempt to setup the host keys, or run sshd at startup, is this supposed to happen? And also, using dhclient doesn't work properly. Touching /etc/resolv.conf causes the file to be populated with the line: nameserver 192.168.1.23 This is wierd... thanks anonymousPseudonym ------=_NextPart_000_019F_01C3EC25.9A07E6A0 Content-Type: application/octet-stream; name="firstboot" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="firstboot" Copyright (c) 1992-2004 The FreeBSD Project.=0A= Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994=0A= The Regents of the University of California. All rights reserved.=0A= FreeBSD 5.2-RELEASE #0: Sun Jan 11 04:21:45 GMT 2004=0A= root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC=0A= Preloaded elf kernel "/boot/kernel/kernel" at 0xc09e1000.=0A= mptable_probe: MP Config Table has bad signature: Mous=0A= Timecounter "i8254" frequency 1193182 Hz quality 0=0A= CPU: AMD Athlon(tm) XP 3200+ (2205.01-MHz 686-class CPU)=0A= Origin =3D "AuthenticAMD" Id =3D 0x6a0 Stepping =3D 0=0A= = Features=3D0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE= ,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>=0A= AMD Features=3D0xc0400000<AMIE,DSP,3DNow!>=0A= real memory =3D 1073676288 (1023 MB)=0A= avail memory =3D 1033519104 (985 MB)=0A= Pentium Pro MTRR support enabled=0A= npx0: [FAST]=0A= npx0: <math processor> on motherboard=0A= npx0: INT 16 interface=0A= pcibios: BIOS version 2.10=0A= Using $PIR table, 11 entries at 0xc00fdeb0=0A= pcib0: <Host to PCI bridge> at pcibus 0 on motherboard=0A= pci0: <PCI bus> on pcib0=0A= agp0: <NVIDIA nForce2 AGP Controller> mem 0xc0000000-0xcfffffff at = device 0.0 on pci0=0A= pci0: <memory, RAM> at device 0.1 (no driver attached)=0A= pci0: <memory, RAM> at device 0.2 (no driver attached)=0A= pci0: <memory, RAM> at device 0.3 (no driver attached)=0A= pci0: <memory, RAM> at device 0.4 (no driver attached)=0A= pci0: <memory, RAM> at device 0.5 (no driver attached)=0A= isab0: <PCI-ISA bridge> at device 1.0 on pci0=0A= isa0: <ISA bus> on isab0=0A= pci0: <serial bus, SMBus> at device 1.1 (no driver attached)=0A= ohci0: <OHCI (generic) USB controller> mem 0xe3002000-0xe3002fff irq 5 = at device 2.0 on pci0=0A= usb0: OHCI version 1.0, legacy support=0A= usb0: SMM does not respond, resetting=0A= usb0: <OHCI (generic) USB controller> on ohci0=0A= usb0: USB revision 1.0=0A= uhub0: (0x10de) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0A= uhub0: 3 ports with 3 removable, self powered=0A= ohci1: <OHCI (generic) USB controller> mem 0xe3003000-0xe3003fff irq 11 = at device 2.1 on pci0=0A= usb1: OHCI version 1.0, legacy support=0A= usb1: SMM does not respond, resetting=0A= usb1: <OHCI (generic) USB controller> on ohci1=0A= usb1: USB revision 1.0=0A= uhub1: (0x10de) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0A= uhub1: 3 ports with 3 removable, self powered=0A= pci0: <serial bus, USB> at device 2.2 (no driver attached)=0A= pci0: <multimedia, audio> at device 6.0 (no driver attached)=0A= pcib1: <PCIBIOS PCI-PCI bridge> at device 8.0 on pci0=0A= pci1: <PCI bus> on pcib1=0A= pci_cfgintr: 1:5 INTA BIOS irq 11=0A= rl0: <RealTek 8139 10/100BaseTX> port 0x9000-0x90ff mem = 0xe2000000-0xe20000ff irq 11 at device 5.0 on pci1=0A= rl0: Ethernet address: 00:40:f4:7b:ac:f4=0A= miibus0: <MII bus> on rl0=0A= rlphy0: <RealTek internal media interface> on miibus0=0A= rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto=0A= atapci0: <nVidia nForce2 UDMA133 controller> port 0xf000-0xf00f at = device 9.0 on pci0=0A= ata0: at 0x1f0 irq 14 on atapci0=0A= ata0: [MPSAFE]=0A= ata1: at 0x170 irq 15 on atapci0=0A= ata1: [MPSAFE]=0A= pcib2: <PCI-PCI bridge> at device 30.0 on pci0=0A= pci2: <PCI bus> on pcib2=0A= pci2: <display, VGA> at device 0.0 (no driver attached)=0A= pci2: <display> at device 0.1 (no driver attached)=0A= orm0: <Option ROMs> at iomem 0xd0000-0xd3fff,0xc0000-0xccfff on isa0=0A= pmtimer0 on isa0=0A= atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0=0A= atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0=0A= kbd0 at atkbd0=0A= psm0: <PS/2 Mouse> irq 12 on atkbdc0=0A= psm0: model IntelliMouse Explorer, device ID 4=0A= fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port = 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0=0A= fdc0: FIFO enabled, 8 bytes threshold=0A= fd0: <1440-KB 3.5" drive> on fdc0 drive 0=0A= ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0=0A= ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode=0A= ppbus0: <Parallel port bus> on ppc0=0A= plip0: <PLIP network interface> on ppbus0=0A= lpt0: <Printer> on ppbus0=0A= lpt0: Interrupt-driven port=0A= ppi0: <Parallel I/O> on ppbus0=0A= sc0: <System console> at flags 0x100 on isa0=0A= sc0: VGA <16 virtual consoles, flags=3D0x300>=0A= sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0=0A= sio0: type 16550A=0A= sio1 at port 0x2f8-0x2ff irq 3 on isa0=0A= sio1: type 16550A=0A= vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0=0A= unknown: <PNP0303> can't assign resources (port)=0A= unknown: <PNP0f13> can't assign resources (irq)=0A= unknown: <PNP0501> can't assign resources (port)=0A= unknown: <PNP0700> can't assign resources (port)=0A= unknown: <PNP0400> can't assign resources (port)=0A= unknown: <PNP0501> can't assign resources (port)=0A= Timecounter "TSC" frequency 2205014715 Hz quality 800=0A= Timecounters tick every 10.000 msec=0A= GEOM: create disk ad0 dp=3D0xc6b3f660=0A= ad0: 152627MB <WDC WD1600JB-00EVA0> [310101/16/63] at ata0-master UDMA100=0A= GEOM: create disk ad1 dp=3D0xc6b3f360=0A= ad1: 58644MB <IC35L060AVER07-0> [119150/16/63] at ata0-slave UDMA100=0A= acd0: DVDR <ASUS DVD-RW DRW-0402P> at ata1-master PIO4=0A= Mounting root from ufs:/dev/ad1s2a=0A= ------=_NextPart_000_019F_01C3EC25.9A07E6A0--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?01a201c3ec25$9a7156d0$0601a8c0>