Date: Tue, 31 Aug 2004 16:47:04 +0200 From: "=?iso-8859-15?Q?Jos=E9?= M. =?iso-8859-15?Q?Fandi=F1o?=" <bsdalpha@fadesa.es> Cc: freebsd-alpha@freebsd.org Subject: Re: miata hangs on boot with 5.3-BETA2-alpha-bootonly.iso image Message-ID: <41348F68.A938E9A6@fadesa.es> References: <413489F8.2A043E20@fadesa.es> <20040831143609.GV59909@cicely12.cicely.de>
next in thread | previous in thread | raw e-mail | index | archive | help
Bernd Walter wrote:
> =
> On Tue, Aug 31, 2004 at 04:23:52PM +0200, Jos=E9 M. Fandi=F1o wrote:
> > Hello,
> >
> > While testing BETA2 the box hangs at xl0 detection.
> >
> > Below I attach boot output from 5.3-BETA2 and if you
> > read the next boot you will see a normal (and successful)
> > boot with 5.2.1-RELEASE.
> >
> > Any idea about the problem?
> > (if you need some other info don't hesitate to request it)
> =
> Sound similar to PHK's AS1000A story - and this box has no EISA at all!=
> But it also has no gap in PCI bus numbering and just hangs instead of
> traping.
> I would bet that this case has the same cause.
> Can you produce a boot -v output please?
>>>boot dka0
(boot dka0.0.0.107.0 -file kernel -flags a)
block 0 of dka0.0.0.107.0 is a valid boot block
reading 409 blocks from dka0.0.0.107.0
bootstrap code read in
base =3D 1e6000, image_start =3D 0, image_bytes =3D 33200
initializing HWRPB at 2000
initializing page table at 1d8000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
Console: SRM firmware console
VMS PAL rev: 0x1000000010114
OSF PAL rev: 0x1000000020116
Switch to OSF PAL code succeeded.
FreeBSD/alpha SRM CD9660 boot, Revision 1.2
(root@ds10.wbnet, Mon Aug 30 03:48:07 UTC 2004)
Memory: 196608 k
Loading /boot/defaults/loader.conf
/boot/kernel/kernel data=3D0x5b77f0+0x4d110 syms=3D[0x8+0x68b20+0x8+0x556=
4f]
-
Hit [Enter] to boot immediately, or any other key for command prompt.
Type '?' for a list of commands, 'help' for more detailed help.
OK
OK boot -v
Entering /boot/kernel/kernel at 0xfffffc0000346fe0...
GDB: debug ports: sio
GDB: current port: sio
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.=
FreeBSD 5.3-BETA2 #0: Mon Aug 30 17:59:15 UTC 2004
root@ds10.wbnet:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xfffffc0000dfe000.
Preloaded mfs_root "/boot/mfsroot" at 0xfffffc0000dfe0e0.
Digital Personal Workstation (Miata)
Digital Personal WorkStation 500au, 500MHz
8192 byte page size, 1 processor.
CPU: EV56 (21164A) major=3D7 minor=3D0 extensions=3D0x1<BWX>
OSF PAL rev: 0x1000000020116
real memory =3D 199327744 (190 MB)
Physical memory chunk(s):
0x00e20000 - 0x0bd09fff, 183410688 bytes (22389 pages)
avail memory =3D 181272576 (172 MB)
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
mem: <memory>
cia0: <2117x Core Logic chipset>
cia0: Pyxis, pass 1
cia0: extended capabilities: 1<BWEN>
pci0: <PCI bus> on pcib0
pci0: physical bus=3D0
map[10]: type 4, range 32, base 00009000, size 7, enabled
map[14]: type 1, range 32, base 81181000, size 7, enabled
found-> vendor=3D0x1011, dev=3D0x0019, revid=3D0x30
bus=3D0, slot=3D3, func=3D0
class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0047, statreg=3D0x0280, cachelnsz=3D16 (dwords)
lattimer=3D0xff (7650 ns), mingnt=3D0x14 (5000 ns), maxlat=3D0x28=
(10000 ns)
intpin=3Da, irq=3D0
found-> vendor=3D0x1080, dev=3D0xc693, revid=3D0x00
bus=3D0, slot=3D7, func=3D0
class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0047, statreg=3D0x0a80, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns=
)
map[20]: type 4, range 32, base 000090a0, size 4, enabled
found-> vendor=3D0x1080, dev=3D0xc693, revid=3D0x00
bus=3D0, slot=3D7, func=3D1
class=3D01-01-80, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0045, statreg=3D0x0280, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns=
)
intpin=3Da, irq=3D238
map[10]: type 4, range 32, base 00000170, size 3, enabled
map[14]: type 4, range 32, base 00000374, size 2, enabled
map[20]: type 1, range 32, base 81170000, size 16, memory disable=
d
found-> vendor=3D0x1080, dev=3D0xc693, revid=3D0x00
bus=3D0, slot=3D7, func=3D2
class=3D01-01-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0045, statreg=3D0x0280, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns=
)
intpin=3Db, irq=3D239
map[10]: type 1, range 32, base 81180000, size 12, enabled
found-> vendor=3D0x1080, dev=3D0xc693, revid=3D0x00
bus=3D0, slot=3D7, func=3D3
class=3D0c-03-10, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0047, statreg=3D0x9280, cachelnsz=3D0 (dwords)
lattimer=3D0xf8 (7440 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0=
ns)
intpin=3Da, irq=3D234
map[10]: type 1, range 32, base 81140000, size 17, enabled
map[14]: type 1, range 32, base 80800000, size 23, enabled
map[18]: type 1, range 32, base 80000000, size 23, enabled
found-> vendor=3D0x104c, dev=3D0x3d07, revid=3D0x01
bus=3D0, slot=3D12, func=3D0
class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0007, statreg=3D0x0280, cachelnsz=3D0 (dwords)
lattimer=3D0xff (7650 ns), mingnt=3D0xc0 (48000 ns), maxlat=3D0xc=
0 (48000 ns)
intpin=3Da, irq=3D8
found-> vendor=3D0x1011, dev=3D0x0024, revid=3D0x03
bus=3D0, slot=3D20, func=3D0
class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0
cmdreg=3D0x0107, statreg=3D0x1a90, cachelnsz=3D16 (dwords)
lattimer=3D0xff (7650 ns), mingnt=3D0x20 (8000 ns), maxlat=3D0x00=
(0 ns)
dc0: <Intel 21143 10/100BaseTX> port 0x9000-0x907f mem 0x81181000-0x81181=
07f irq 0 at device 3.0 on pci0
dc0: Reserved 0x80 bytes for rid 0x10 type 4 at 0x9000
miibus0: <MII bus> on dc0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: bpf attached
dc0: Ethernet address: 08:00:2b:86:85:93
dc0: interrupting at CIA irq 0
dc0: [GIANT-LOCKED]
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Cypress 82C693 ATA controller> port 0x90a0-0x90af,0x376,0x170-0=
x177,0x3f6,0x1f0-0x1f7 irq 238 at device 7.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x90a0
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D01
ata0-master: stat=3D0x00 err=3D0x01 lsb=3D0x14 msb=3D0xeb
ata0-slave: stat=3D0x00 err=3D0x04 lsb=3D0x00 msb=3D0x00
ata0: reset tp2 stat0=3D00 stat1=3D00 devices=3D0x4<ATAPI_MASTER>
ata0: interrupting at ISA irq 14
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=3D00 ostat0=3Dff ostat1=3Dff
ata1: interrupting at ISA irq 15
ata1: [MPSAFE]
atapci1: <GENERIC ATA controller> port 0x377-0x37a,0x170-0x177 mem 0x8117=
0000-0x8117ffff irq 239 at device 7.2 on pci0
atapci1: failed: rid 0x20 is memory, requested 4
atapci1: unable to map interrupt
ata2: channel #0 on atapci1
device_attach: ata2 attach returned 6
ohci0: <OHCI (generic) USB controller> mem 0x81180000-0x81180fff irq 234 =
at device 7.3 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x81180000
ohci0: (New OHCI DeviceId=3D0xc6931080)
ohci0: interrupting at ISA irq 10
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1080) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <display, VGA> at device 12.0 (no driver attached)
pcib1: <PCI-PCI bridge> at device 20.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 0
pcib1: I/O decode 0x8000-0x8fff
pcib1: memory decode 0x81000000-0x810fffff
pcib1: prefetched decode 0xfff00000-0xfffff
pci1: <PCI bus> on pcib1
pci1: physical bus=3D1
map[10]: type 4, range 32, base 00008000, size 8, enabled
pcib1: device (null) requested decoded I/O range 0x8000-0x80ff
map[14]: type 1, range 32, base 81030000, size 12, enabled
pcib1: device (null) requested decoded memory range 0x81030000-0x81030fff=
found-> vendor=3D0x1077, dev=3D0x1020, revid=3D0x05
bus=3D1, slot=3D4, func=3D0
class=3D01-00-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0057, statreg=3D0x0200, cachelnsz=3D16 (dwords)
lattimer=3D0xf8 (7440 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0=
ns)
intpin=3Da, irq=3D3
map[10]: type 4, range 32, base 00008100, size 7, enabled
pcib1: device (null) requested decoded I/O range 0x8100-0x817f
map[14]: type 1, range 32, base 81031000, size 7, enabled
pcib1: device (null) requested decoded memory range 0x81031000-0x8103107f=
found-> vendor=3D0x10b7, dev=3D0x9200, revid=3D0x74
bus=3D1, slot=3D8, func=3D0
class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0047, statreg=3D0x1210, cachelnsz=3D16 (dwords)
lattimer=3D0xf8 (7440 ns), mingnt=3D0x0a (2500 ns), maxlat=3D0x0a=
(2500 ns)
intpin=3Da, irq=3D12
powerspec 2 supports D0 D1 D2 D3 current D0
Qlogic ISP Driver, FreeBSD Version 5.9, Core Version 2.8
isp0: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0x8000-0x80ff mem 0x81=
030000-0x81030fff irq 3 at device 4.0 on pci1
isp0: Reserved 0x1000 bytes for rid 0x14 type 3 at 0x81030000
isp0: using Memory space register mapping
isp0: interrupting at CIA irq 3
isp0: [GIANT-LOCKED]
isp0: Ultra Mode Capable
isp0: Board Type 1040B, Chip Revision 0x5, loaded F/W Revision 4.66.0
isp0: Last F/W revision was 5.57.1
isp0: 243 max I/O commands supported
isp0: Initiator ID is 7 on Channel 0
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x8100-0x817f mem 0x81031000=
-0x8103107f irq 12 at device 8.0 on pci1
xl0: Reserved 0x80 bytes for rid 0x14 type 3 at 0x81031000
xl0: using memory mapped I/O
xl0: media options word: a
xl0: found MII/AUTO
miibus1: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus1
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: bpf attached
xl0: Ethernet address: 00:01:02:1a:20:1c
xl0: interrupting at CIA irq 12
xl0: [GIANT-LOCKED]
-- =
-----BEGIN GEEK CODE BLOCK-----
Version: 3.1
GCS/IT d- s+:+() a- C+++ UBL+++$ P+ L+++ E--- W++ N+ o++ K- w---
O+ M+ V- PS+ PE+ Y++ PGP+>+++ t+ 5 X+$ R- tv-- b+++ DI D++>+++
G++ e- h+(++) !r !z
------END GEEK CODE BLOCK------
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?41348F68.A938E9A6>