Date: Sun, 5 May 2002 12:10:33 -0400 From: "Steven J. Corso" <steve@netdtw.com> To: <freebsd-mobile@freebsd.org> Subject: PCCARD Modems Message-ID: <000a01c1f44f$63676a00$66faa8c0@NETDTW.COM>
index | next in thread | raw e-mail
[-- Attachment #1 --]
I am having problems getting any PCCARD modem to work properly with FreeBSD (4.6-PRERELEASE or 4.5-stable a few days ago). They all see to exhibit the same symptom, they are recognized, and will answer to AT commands, but all indicated NO DIALTONE.
At boot time the Toshiba Portege 3010CT indicates the following:
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.6-PRERELEASE #2: Sun May 5 10:06:21 EDT 2002
steve@steve3010.netdtw.com:/usr/src/sys/compile/STEVE3010
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium/P55C (quarter-micron) (266.62-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x582 Stepping = 2
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 100728832 (98368K bytes)
avail memory = 92704768 (90532K bytes)
Preloaded elf kernel "kernel" at 0xc051d000.
Intel Pentium detected, installing workaround for F00F bug
md0: Malloc disk
Using $PIR table, 4 entries at 0xc00f9070
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pci0: <NeoMagic MagicGraph 128XD SVGA controller> at 4.0 irq 11
ohci0: <NEC uPD 9210 USB controller> mem 0xffaff000-0xffafffff irq 11 at device 11.0 on pci0
usb0: OHCI version 1.0
usb0: <NEC uPD 9210 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Toshiba Fast Infra Red controller> port 0xffc0-0xffdf irq 11 at device 17.0 on pci0
pci_cfgintr_virgin: using routable interrupt 3
pci_cfgintr: 0:19 INTA routed to irq 3
pcic0: <Toshiba ToPIC97 PCI-CardBus Bridge> irq 3 at device 19.0 on pci0
pcic0: PCI Memory allocated: 0x44000000
pccard0: <PC Card bus (classic)> on pcic0
pci_cfgintr_search: linked (1) to configured irq 3 at 0:19:0
pci_cfgintr: 0:19 INTB routed to irq 3
pcic1: <Toshiba ToPIC97 PCI-CardBus Bridge> irq 3 at device 19.1 on pci0
pcic1: PCI Memory allocated: 0x44001000
pccard1: <PC Card bus (classic)> on pcic1
isa0: <ISA bus> on motherboard
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
fdc0: <NEC 765 or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
pcm0: <OPL3-SAx (YMF719)> at port 0x530-0x537,0x370-0x371,0xf8c-0xf94,0xe0e irq 5 drq 1 flags 0xc115 on isa0
ad0: 28615MB <IC25N030ATDA04-0> [58140/16/63] at ata0-master BIOSPIO
Mounting root from ufs:/dev/ad0s2a
WARNING: / was not properly dismounted
pccard: card inserted, slot 0
pccard: card inserted, slot 0
ed1 at port 0x300-0x31f irq 3 flags 0x30000 slot 0 on pccard0
ed1: address 00:40:f4:2a:9a:17, type NE2000 (16 bit)
$
Insertion of the PCCARD modem will result in:
pccard: card inserted, slot 1
sio4 at port 0x2f8-0x2ff irq 3 flags 0x40000 slot 1 on pccard1
sio4: type 16550A
sio4: unable to activate interrupt in fast mode - using normal mode
$
I would appreciate some assistance in correcting this problem.
Thank you,
Steve
[-- Attachment #2 --]
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 5.50.4912.300" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I am having problems getting any PCCARD modem to
work properly with FreeBSD (4.6-PRERELEASE or 4.5-stable a few days
ago). They all see to exhibit the same symptom, they are
recognized, and will answer to AT commands, but all
indicated NO DIALTONE.</FONT></DIV>
<DIV> </DIV>
<DIV> <FONT face=Arial size=2>At boot time the Toshiba Portege 3010CT
indicates the following:</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Copyright (c) 1992-2002 The FreeBSD
Project.<BR>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
1994<BR> The Regents of the University
of California. All rights reserved.<BR>FreeBSD 4.6-PRERELEASE #2: Sun May
5 10:06:21 EDT 2002<BR> <A
href="mailto:steve@steve3010.netdtw.com:/usr/src/sys/compile/STEVE3010">steve@steve3010.netdtw.com:/usr/src/sys/compile/STEVE3010</A><BR>Timecounter
"i8254" frequency 1193182 Hz<BR>CPU: Pentium/P55C (quarter-micron)
(266.62-MHz 586-class CPU)<BR> Origin = "GenuineIntel" Id =
0x582 Stepping = 2<BR>
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX><BR>real memory
= 100728832 (98368K bytes)<BR>avail memory = 92704768 (90532K
bytes)<BR>Preloaded elf kernel "kernel" at 0xc051d000.<BR>Intel Pentium
detected, installing workaround for F00F bug<BR>md0: Malloc disk<BR>Using $PIR
table, 4 entries at 0xc00f9070<BR>npx0: <math processor> on
motherboard<BR>npx0: INT 16 interface<BR>pcib0: <Host to PCI bridge> on
motherboard<BR>pci0: <PCI bus> on pcib0<BR>pci0: <NeoMagic MagicGraph
128XD SVGA controller> at 4.0 irq 11<BR>ohci0: <NEC uPD 9210 USB
controller> mem 0xffaff000-0xffafffff irq 11 at device 11.0 on pci0<BR>usb0:
OHCI version 1.0<BR>usb0: <NEC uPD 9210 USB controller> on ohci0<BR>usb0:
USB revision 1.0<BR>uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr
1<BR>uhub0: 2 ports with 2 removable, self powered<BR>chip1: <Toshiba Fast
Infra Red controller> port 0xffc0-0xffdf irq 11 at device 17.0 on
pci0<BR>pci_cfgintr_virgin: using routable interrupt 3<BR>pci_cfgintr: 0:19 INTA
routed to irq 3<BR>pcic0: <Toshiba ToPIC97 PCI-CardBus Bridge> irq 3 at
device 19.0 on pci0<BR>pcic0: PCI Memory allocated: 0x44000000<BR>pccard0:
<PC Card bus (classic)> on pcic0<BR>pci_cfgintr_search: linked (1) to
configured irq 3 at 0:19:0<BR>pci_cfgintr: 0:19 INTB routed to irq 3<BR>pcic1:
<Toshiba ToPIC97 PCI-CardBus Bridge> irq 3 at device 19.1 on
pci0<BR>pcic1: PCI Memory allocated: 0x44001000<BR>pccard1: <PC Card bus
(classic)> on pcic1<BR>isa0: <ISA bus> on motherboard<BR>orm0:
<Option ROM> at iomem 0xc0000-0xcbfff on isa0<BR>fdc0: <NEC 765 or
clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0<BR>ata0 at port
0x1f0-0x1f7,0x3f6 irq 14 on isa0<BR>ata1 at port 0x170-0x177,0x376 irq 15 on
isa0<BR>atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on
isa0<BR>atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0<BR>kbd0 at
atkbd0<BR>psm0: <PS/2 Mouse> irq 12 on atkbdc0<BR>psm0: model Generic PS/2
mouse, device ID 0<BR>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0<BR>sc0: <System console> at flags 0x100 on
isa0<BR>sc0: VGA <16 virtual consoles, flags=0x300><BR>sio0 at port
0x3f8-0x3ff irq 4 flags 0x10 on isa0<BR>sio0: type 16550A<BR>sio1: configured
irq 3 not in bitmap of probed irqs 0<BR>ppc0: <Parallel port> at port
0x378-0x37f irq 7 on isa0<BR>ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE
mode<BR>ppi0: <Parallel I/O> on ppbus0<BR>plip0: <PLIP network
interface> on ppbus0<BR>lpt0: <Printer> on ppbus0<BR>lpt0:
Interrupt-driven port<BR>pcm0: <OPL3-SAx (YMF719)> at port
0x530-0x537,0x370-0x371,0xf8c-0xf94,0xe0e irq 5 drq 1 flags 0xc115 on
isa0<BR>ad0: 28615MB <IC25N030ATDA04-0> [58140/16/63] at ata0-master
BIOSPIO<BR>Mounting root from ufs:/dev/ad0s2a<BR>WARNING: / was not properly
dismounted<BR>pccard: card inserted, slot 0<BR>pccard: card inserted, slot
0<BR>ed1 at port 0x300-0x31f irq 3 flags 0x30000 slot 0 on pccard0<BR>ed1:
address 00:40:f4:2a:9a:17, type NE2000 (16 bit) <BR>$ </FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Insertion of the PCCARD modem will result
in:</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>pccard: card inserted, slot 1<BR>sio4 at port
0x2f8-0x2ff irq 3 flags 0x40000 slot 1 on pccard1<BR>sio4: type 16550A<BR>sio4:
unable to activate interrupt in fast mode - using normal mode<BR>$ </FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>I would appreciate some assistance in correcting
this problem.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Thank you,</FONT></DIV>
<DIV><FONT face=Arial size=2>Steve</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV></BODY></HTML>
home |
help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000a01c1f44f$63676a00$66faa8c0>