Date: Tue, 22 Apr 2008 12:28:16 -0700 From: Jeremy Chadwick <koitsu@freebsd.org> To: Abdullah Ibn Hamad Al-Marri <wearabnet@yahoo.ca> Cc: FreeBSD STABLE <freebsd-stable@freebsd.org> Subject: Re: FreeBSD 7.0-STABLE SATA300 detected as SATA150 Message-ID: <20080422192816.GA44819@eos.sc1.parodius.com> In-Reply-To: <649265.28907.qm@web33701.mail.mud.yahoo.com> References: <649265.28907.qm@web33701.mail.mud.yahoo.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, Apr 22, 2008 at 12:11:13PM -0700, Abdullah Ibn Hamad Al-Marri wrote: > atapci0: <Intel ICH7 SATA300 controller> port 0xd060-0xd067,0xd050-0xd053,0xd040-0xd047,0xd030-0xd033,0xd020-0xd02f irq 17 at device 31.2 on pci0 > ad4: 238475MB <WDC WD2500KS-00MJB0 02.01C03> at ata2-master SATA150 > ^^^^^^^^^^^ > ad6: 715404MB <WDC WD7500AAKS-00RBA0 30.04G30> at ata3-master SATA150 Please ensure the SATA150-limiting jumper from the drive has been removed. It's labelled OPT1 in the below picture: http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/std_adp.php?p_faqid=1343&p_created=1112716146 I assure you these drives work fine with the above controller. Taken from our PDSMi+ production systems, which are ICH7: atapci1: <Intel AHCI controller> port 0x30e8-0x30ef,0x30dc-0x30df,0x30e0-0x30e7,0x30d8-0x30db,0x30b0-0x30bf mem 0xe0000400-0xe00007ff irq 19 at device 31.2 on pci0 atapci1: AHCI Version 01.10 controller with 4 ports detected ata2: <ATA channel 0> on atapci1 ata3: <ATA channel 1> on atapci1 ata4: <ATA channel 2> on atapci1 ata5: <ATA channel 3> on atapci1 ad4: 114473MB <Seagate ST3120827AS 3.42> at ata2-master SATA150 ad6: 238475MB <WDC WD2500KS-00MJB0 02.01C03> at ata3-master SATA300 -- | Jeremy Chadwick jdc at parodius.com | | Parodius Networking http://www.parodius.com/ | | UNIX Systems Administrator Mountain View, CA, USA | | Making life hard for others since 1977. PGP: 4BD6C0CB |
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20080422192816.GA44819>