Date: Fri, 16 May 2008 16:32:41 +0100 From: "=?ISO-8859-1?Q?Vin=EDcius_Abrah=E3o?=" <vinnix.bsd@gmail.com> To: "Rui Paulo" <rpaulo@freebsd.org> Cc: akiyama@jp.freebsd.org, ichiro@ichiro.org, freebsd-hardware@freebsd.org Subject: Re: Modem GPRS USB Message-ID: <1e31c7980805160832j7aac492v77469255f483490f@mail.gmail.com> In-Reply-To: <482ABC29.9030002@FreeBSD.org> References: <1e31c7980805130830w15aa90a0jfe19a279a4e6a628@mail.gmail.com> <482ABC29.9030002@FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi Rui Pablo, thanks for your help: with usbsa(4) (and without umass, ugen, etc) my modem is working normaly (both: pcmcia[huawei] and usb[qualcomm3]). But now I have one other problem that need your help if possible? When I connect I recive this: May 16 12:17:08 vinnix ppp[1262]: tun0: Warning: 0.0.0.0: Change route failed: errno: No such process May 16 12:17:08 vinnix ppp[1262]: tun0: Warning: ff02:5::: Change route failed: errno: Network is unreachable The PPP fails to get a default route, after connect. Can you help-me with this? Thanks again!!! Best regards, Vinnix On Wed, May 14, 2008 at 11:17 AM, Rui Paulo <rpaulo@freebsd.org> wrote: > Vin=EDcius Abrah=E3o wrote: > >> Hi People, >> >> First, sorry about my poor english. >> I have modem usb: hsdpa/edge/gprs, but I don't know how to >> make this work. This is the description about the device: >> >> umass0: <Qualcomm, Incorporated USB ONDA Storage, class 0/0, rev >> 1.10/0.00, >> addr 2> on uhub2 >> cd0 at umass-sim0 bus 0 target 0 lun 0 >> cd0: <ONDA USB Storage 2.31> Removable CD-ROM SCSI-2 device >> cd0: 1.000MB/s transfers >> cd0: cd present [4623 x 2048 byte records] >> GEOM_LABEL: Label for provider cd0 is iso9660/ONDAMODEM >> >> At my kernel configuration file we find: >> device ugen # Generic >> device ucom # Modem UCOM >> device ugencom # Modem CDMA MSM >> device umodem # Modem COM >> >> Thanks in advice for any light. >> > > Since we don't have yet a way to unplug these modems from umass, you shou= ld > remove umass, ugen, ucom, etc. from your kernel config file and build it = as > modules. > > I have a similar modem, and what I did was: > 1) Don't have umass.ko loaded. > 2) Wait a few seconds. The device will disconnect. > 3) ubsa(4) should support these modems, so have it loaded, or load it now= . > > Hope this works, > -- > Rui Paulo >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1e31c7980805160832j7aac492v77469255f483490f>