Date: Tue, 23 May 2006 19:04:51 +0200 From: Michal =?utf-8?q?Van=C4=8Do?= <michal.vanco@satro.sk> To: freebsd-current@freebsd.org Cc: Warner Losh <imp@bsdimp.com> Subject: Re: Atheros 5212 in 6.1-REL Message-ID: <200605231904.52081.michal.vanco@satro.sk> In-Reply-To: <20060523.084445.74659709.imp@bsdimp.com> References: <200605230806.40543.michal.vanco@satro.sk> <200605231552.08317.michal.vanco@satro.sk> <20060523.084445.74659709.imp@bsdimp.com>
next in thread | previous in thread | raw e-mail | index | archive | help
--Boundary-00=_0C0cEgeiZeYLKlH
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
On Tuesday 23 May 2006 16:44, Warner Losh wrote:
> > 16-bit cards works well. only cardbus cards don't work.
>
> Just the atheros card, or all cardbus cards? Can you send me the
> output of a verbose boot. I'm looking specifically for messages from
> the pci system and cardbus system, so a full one would be idea. I
> think I know what might be the problem. Also, please include
> make/model of the laptop along with the dmesg. I think I might know
> what's going on...
I've only one cardbus card (atheros).
my system is:
SIS Green550 laptop with 512MB RAM
root@silver:~# uname -a
FreeBSD silver.misko.satronet.sk 6.1-RELEASE FreeBSD 6.1-RELEASE #5: Tue May
23 18:48:21 CEST 2006
root@silver.misko.satronet.sk:/usr/obj/usr/src/sys/SILVER i386
i have this in /boot/loader.conf:
root@silver:~# cat /boot/loader.conf
hw.cbb.debug="1"
hw.cardbus.debug="1"
hw.cardbus.cis_debug="1"
hw.pccard.debug="1"
hw.pccard.cis_debug="1"
dmesg is attached
michal
--Boundary-00=_0C0cEgeiZeYLKlH
Content-Type: text/plain;
charset="iso-8859-1";
name="dmesg"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename="dmesg"
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.1-RELEASE #5: Tue May 23 18:48:21 CEST 2006
root@silver.misko.satronet.sk:/usr/obj/usr/src/sys/SILVER
Preloaded elf kernel "/boot/kernel/kernel" at 0xc08ff000.
Calibrating clock(s) ... i8254 clock: 1193141 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1991923480 Hz
CPU: Intel(R) Pentium(R) 4 Mobile CPU 2.00GHz (1991.92-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf24 Stepping = 4
Features=0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory = 469696512 (447 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c25000 - 0x000000001b7d7fff, 448475136 bytes (109491 pages)
avail memory = 450240512 (429 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fdb30
bios32: Entry = 0xfdb40 (c00fdb40) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xdb61
pnpbios: Found PnP BIOS data at 0xc00f7a70
pnpbios: Entry = f0000:6afb Rev = 1.0
Other BIOS signatures found:
wlan: <802.11 Link Layer>
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
nfslock: pseudo-device
random: <entropy source, Software, Yarrow>
io: <I/O>
VESA: information block
56 45 53 41 00 03 00 01 00 01 00 00 00 00 22 00
00 01 ff 03 00 01 14 01 00 01 46 01 00 01 5a 01
00 01 02 01 01 01 00 01 03 01 04 01 05 01 0d 01
0e 01 10 01 11 01 13 01 14 01 16 01 17 01 18 01
VESA: 25 mode(s) found
VESA: v3.0, 65472k memory, flags:0x0, mode table:0xc0853062 (1000022)
VESA: SiS
VESA: Silicon Integrated Systems Corp. 6325 1.10.9g
ath_hal: 0.9.16.16 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <AMIINT SiS645XX> on motherboard
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80010010
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=06511039)
pcibios: BIOS version 2.10
Found $PIR table, 7 entries at 0xc00f8090
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 1 A 0x41 11
embedded 0 1 B 0x42 11
embedded 0 1 C 0x43 11
embedded 0 1 D 0x44 11
embedded 0 2 A 0x41 11
embedded 0 2 B 0x42 11
embedded 0 2 C 0x43 11
embedded 0 2 D 0x44 11
embedded 0 3 A 0x60 10
embedded 0 3 B 0x61 10
embedded 0 3 C 0x62 10
embedded 0 3 D 0x63 10
embedded 0 10 A 0x41 11
slot 1 0 5 A 0x42 11
slot 1 0 5 B 0x43 11
slot 5 0 6 A 0x42 11
slot 5 0 6 B 0x43 11
embedded 0 4 A 0x44 11
AcpiOsDerivePciId: bus 0 dev 2 func 0
AcpiOsDerivePciId: bus 0 dev 2 func 0
acpi0: Power Button (fixed)
atpic: Programming IRQ9 as level/low
AcpiOsDerivePciId: bus 0 dev 0 func 0
acpi_ec0: <Embedded Controller: GPE 0x12> port 0x62,0x66 on acpi0
acpi_ec0: info: new max delay is 20 us
acpi_ec0: info: new max delay is 350 us
pci_link0: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 11
pci_link0: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 11
pci_link0: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 11
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 11
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 11
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 11
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 11
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 11
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 11
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 11
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 11
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 11
pci_link4: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 10
pci_link4: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 10
pci_link4: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 10
pci_link5: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 10
pci_link5: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 10
pci_link5: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 10
pci_link6: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 10
pci_link6: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 10
pci_link6: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 10
pci_link7: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 10
pci_link7: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 10
pci_link7: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 10
ACPI timer: 1/2 1/1 1/1 1/2 1/2 1/1 1/2 1/2 1/2 1/2 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI: Found matching pin for 0.2.INTC at func 6: 11
ACPI: Found matching pin for 0.3.INTA at func 0: 10
ACPI: Found matching pin for 0.3.INTB at func 1: 10
ACPI: Found matching pin for 0.3.INTC at func 2: 10
ACPI: Found matching pin for 0.3.INTD at func 3: 10
ACPI: Found matching pin for 0.10.INTA at func 0: 11
ACPI: Found matching pin for 0.4.INTA at func 0: 11
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x1039, dev=0x0651, revid=0x02
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x2210, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base e0000000, size 27, enabled
found-> vendor=0x1039, dev=0x0001, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x0a (2500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1039, dev=0x0008, revid=0x14
bus=0, slot=2, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1039, dev=0x5513, revid=0x00
bus=0, slot=2, func=5
class=01-01-80, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000ff00, size 4, enabled
found-> vendor=0x1039, dev=0x7013, revid=0xa0
bus=0, slot=2, func=6
class=07-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0105, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x34 (13000 ns), maxlat=0x0b (2750 ns)
intpin=c, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000d400, size 8, enabled
map[14]: type 4, range 32, base 0000d000, size 7, enabled
pcib0: matched entry for 0.2.INTC (src \\_SB_.LNKC:0)
pcib0: slot 2 INTC routed to irq 11 via \\_SB_.LNKC
found-> vendor=0x1039, dev=0x7012, revid=0xa0
bus=0, slot=2, func=7
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0105, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x34 (13000 ns), maxlat=0x0b (2750 ns)
intpin=c, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000dc00, size 8, enabled
map[14]: type 4, range 32, base 0000d800, size 7, enabled
pcib0: matched entry for 0.2.INTC (src \\_SB_.LNKC:0)
pcib0: slot 2 INTC routed to irq 11 via \\_SB_.LNKC
found-> vendor=0x1039, dev=0x7001, revid=0x0f
bus=0, slot=3, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0117, statreg=0x0280, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=a, irq=10
map[10]: type 1, range 32, base dfff8000, size 12, enabled
pcib0: matched entry for 0.3.INTA (src \\_SB_.LNKE:0)
pcib0: slot 3 INTA routed to irq 10 via \\_SB_.LNKE
found-> vendor=0x1039, dev=0x7001, revid=0x0f
bus=0, slot=3, func=1
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0280, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=b, irq=10
map[10]: type 1, range 32, base dfff9000, size 12, enabled
pcib0: matched entry for 0.3.INTB (src \\_SB_.LNKF:0)
pcib0: slot 3 INTB routed to irq 10 via \\_SB_.LNKF
found-> vendor=0x1039, dev=0x7001, revid=0x0f
bus=0, slot=3, func=2
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0280, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=c, irq=10
map[10]: type 1, range 32, base dfffb000, size 12, enabled
pcib0: matched entry for 0.3.INTC (src \\_SB_.LNKG:0)
pcib0: slot 3 INTC routed to irq 10 via \\_SB_.LNKG
found-> vendor=0x1039, dev=0x7002, revid=0x00
bus=0, slot=3, func=3
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=d, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base dfffa000, size 12, enabled
pcib0: matched entry for 0.3.INTD (src \\_SB_.LNKH:0)
pcib0: slot 3 INTD routed to irq 10 via \\_SB_.LNKH
found-> vendor=0x1039, dev=0x0900, revid=0x91
bus=0, slot=4, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x34 (13000 ns), maxlat=0x0b (2750 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000cc00, size 8, enabled
map[14]: type 1, range 32, base dfff6000, size 12, enabled
pcib0: matched entry for 0.4.INTA (src \\_SB_.LNKD:0)
pcib0: slot 4 INTA routed to irq 11 via \\_SB_.LNKD
found-> vendor=0x1524, dev=0x1410, revid=0x00
bus=0, slot=10, func=0
class=06-07-00, hdrtype=0x02, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x03 (750 ns)
intpin=a, irq=11
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 00000000, size 12, enabled
pcib0: matched entry for 0.10.INTA (src \\_SB_.LNKA:0)
pcib0: slot 10 INTA routed to irq 11 via \\_SB_.LNKA
agp0: <SiS 651 host to AGP bridge> mem 0xe0000000-0xe7ffffff at device 0.0 on pci0
agp0: Reserved 0x8000000 bytes for rid 0x10 type 3 at 0xe0000000
agp0: allocating GATT for aperture of size 128M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 2
pcib1: I/O decode 0xa000-0xafff
pcib1: memory decode 0xdfd00000-0xdfefffff
pcib1: prefetched decode 0xcfa00000-0xdfbfffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
found-> vendor=0x1039, dev=0x6325, revid=0x00
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 3, range 32, base d0000000, size 27, enabled
pcib1: (null) requested memory range 0xd0000000-0xd7ffffff: good
map[14]: type 1, range 32, base dfee0000, size 17, enabled
pcib1: (null) requested memory range 0xdfee0000-0xdfefffff: good
map[18]: type 4, range 32, base 0000ac00, size 7, enabled
pcib1: (null) requested I/O range 0xac00-0xac7f: in range
pcib0: matched entry for 0.1.INTA (src \\_SB_.LNKA:0)
pcib0: slot 1 INTA routed to irq 11 via \\_SB_.LNKA
pcib1: slot 0 INTA is routed to irq 11
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <SiS 962/963 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 2.5 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xff00
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1: stat0=0x10 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=10 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: [MPSAFE]
pci0: <simple comms, generic modem> at device 2.6 (no driver attached)
pcm0: <SiS 7012> port 0xdc00-0xdcff,0xd800-0xd87f irq 11 at device 2.7 on pci0
pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xdc00
pcm0: Reserved 0x80 bytes for rid 0x14 type 4 at 0xd800
pcm0: [MPSAFE]
pcm0: <Avance Logic ALC202 AC97 Codec (id = 0x414c4740)>
pcm0: Codec features headphone, 20 bit DAC, 18 bit ADC, 6 bit master volume, Realtek 3D Stereo Enhancement
pcm0: Primary codec extended features variable rate PCM, double rate PCM, reserved 1, AMAP, reserved 4
pcm0: ac97 codec dac ready count: 0
pcm0: sndbuf_setmap 1b5cc000, 4000; 0xdb3b3000 -> 1b5cc000
pcm0: sndbuf_setmap 1b5c8000, 4000; 0xdb3b7000 -> 1b5c8000
ohci0: <SiS 5571 USB controller> mem 0xdfff8000-0xdfff8fff irq 10 at device 3.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xdfff8000
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0xdfff9000-0xdfff9fff irq 10 at device 3.1 on pci0
ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xdfff9000
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ohci2: <SiS 5571 USB controller> mem 0xdfffb000-0xdfffbfff irq 10 at device 3.2 on pci0
ohci2: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xdfffb000
ohci2: [GIANT-LOCKED]
usb2: OHCI version 1.0, legacy support
usb2: SMM does not respond, resetting
usb2: <SiS 5571 USB controller> on ohci2
usb2: USB revision 1.0
uhub2: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xdfffa000-0xdfffafff irq 10 at device 3.3 on pci0
ehci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xdfffa000
ehci0: [GIANT-LOCKED]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: SiS EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
sis0: <SiS 900 10/100BaseTX> port 0xcc00-0xccff mem 0xdfff6000-0xdfff6fff irq 11 at device 4.0 on pci0
sis0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xcc00
miibus0: <MII bus> on sis0
rlphy0: <RTL8201L 10/100 media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis0: bpf attached
sis0: Ethernet address: 00:0a:e6:bd:a6:94
sis0: [MPSAFE]
cbb0: <ENE CB1410 PCI-CardBus Bridge> irq 11 at device 10.0 on pci0
cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80000000
cbb0: Found memory at 80000000
cbb0: Secondary bus is 0
cbb0: Secondary bus set to 2 subbus 3
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
0x00: 0x14101524 0x02100007 0x06070000 0x00022000
0x10: 0x80000000 0x020000a0 0x40030200 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b
0x40: 0xb5501019 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x0c44d021 0x00000000 0x00000000 0x000c1002
0x90: 0x404482c0 0x00000000 0x00000000 0x00000000
0xa0: 0xfe010001 0x00c08100 0x00000009 0x00000009
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00001003 0x00800080 0x10080c00 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0065
psm0: strange result for test aux port (2).
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
npx0: INT 16 interface
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcbfff,0xcc000-0xd5fff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
ppc0 failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0x1 0x1 0x1 0x1
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x1 0x1 0x1 0x1
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 1991923480 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
battery0: battery initialization start
acpi_ec0: info: new max delay is 370 us
acpi_ec0: info: new max delay is 380 us
acpi_ec0: info: new max delay is 420 us
Status is 0x30000820
cbb0: card inserted: event=0x00000000, state=30000820
cbb0: cbb_power: 3V
cbb0: cbb_power: 0V
acpi_ec0: info: new max delay is 430 us
battery0: battery initialization done, tried 1 times
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
ad0: setting PIO4 on 5513 chip
ad0: DMA limited to UDMA33, controller found non-ATA66 cable
ad0: setting UDMA33 on 5513 chip
ad0: 38154MB <IC25N040ATCS04 0 CA4OA71A> at ata0-master UDMA33
ad0: 78140160 sectors [19152C/16H/255S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad0
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on 5513 chip
acd0: setting UDMA33 on 5513 chip
acd0: <QSI CD-RW/DVD-ROM SBW-242/UK01> CDRW drive at ata1 as master
acd0: read 689KB/s (4126KB/s) write 4126KB/s (4126KB/s), 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes: CDR, CDRW, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
pcm0: measured ac97 link rate at 48000 Hz
Trying to mount root from ufs:/dev/ad0s1a
start_init: trying /sbin/init
--Boundary-00=_0C0cEgeiZeYLKlH--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200605231904.52081.michal.vanco>