Date: Tue, 2 Jan 1996 09:35:43 -0600 (CST) From: ptroot@uswest.com To: freebsd-bugs@freebsd.org Subject: Three problems with FreeBSD 2.1 Message-ID: <9601021535.AA00549@kermit.acs.uswest.com>
next in thread | raw e-mail | index | archive | help
Hi,
I just installed FreeBSD 2.1 and am having a few problems:
First my configuration:
DX2/50 with ISA MB
20 Meg Ram
1 1 gig SCSI
1 100 meg SCSI
Cirrus SVGA GD542x
Adaptec 1542B
Logitec 3-button bus mouse
Sound Blaster 16
SMC elite 8013
CTX CVP-5468A 14in SVGA non-interlaced
The disks are laid out as follows
1 Gig
-----
1 - 200 Meg for DOS
2 - 800 Meg for FreeBSD
/ 750 Meg
swap 500 Meg
I keep everything in one partition to easy backups and
optimally use disk space.
I've built a custom kernel with only what I need, and everything
shows up fine, with no conflicts. Though I'm a little concerned with
the port of the SB and the mouse.
The SB 16 is set to port 0x220 and the mouse is (unmovable) at 0x23c.
1) When I halt/reboot/shutdown the machine, it tries to
sync but after a line full of 1 1 1 1 1 it says
giving up. then on reboot it says / was not properly unmounted.
Could it be that the partition goes past 1024 cylinders?
2) X won't work.
I can only start it as root, though the device is 666. I
tried this with both the sco and the vt console. (I built both)
There is a 1 inch border on all sides. I don't have enough
screen to let that happen.
The mouse runs to 0 0 and then won't move from it, the
first time you touch the mouse. This is the mse0 driver.
Any help is appreciated.
Thanks,
Paul.
--
Paul T. Root E/Mail: ptroot@uswest.com
200 S. 5th St. Suite 1100 PAG: +1 (800) SKY-PAGE PIN: 537-7370
Minneapolis, MN 55402 WRK: +1 (612) 663-1979
NIC: PTR FAX: +1 (612) 663-8030
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?9601021535.AA00549>