Date: Wed, 08 Jun 2005 13:01:08 +0200 From: Palle Girgensohn <girgen@FreeBSD.org> To: Kay Abendroth <kay.abendroth@raxion.net> Cc: freebsd-stable@freebsd.org Subject: Re: PANIC in RELENG_5 Message-ID: <C5742251FA6CF493BD1056F0@rambutan.pingpong.net> In-Reply-To: <42A6B9E5.9060305@raxion.net> References: <42A5C56B.6030009@raxion.net> <1ADA2F45FE0058F92D75D79A@palle.girgensohn.se> <42A6B9E5.9060305@raxion.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Mine, and most others with this problem, have Dell 2850. Same ethernet controller, though, `em'...? /Palle --On onsdag, juni 08, 2005 11.27.01 +0200 Kay Abendroth <kay.abendroth@raxion.net> wrote: > Output of 'dmesg': > > Copyright (c) 1992-2005 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 5.4-STABLE #0: Fri Jun 3 08:49:22 UTC 2005 > root@susi.redhill.net:/usr/obj/usr/src/sys/SUSI > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: AMD Athlon(tm) XP 1700+ (1470.01-MHz 686-class CPU) > Origin = "AuthenticAMD" Id = 0x681 Stepping = 1 > Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE, > MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> > AMD Features=0xc0400000<AMIE,DSP,3DNow!> > real memory = 1610547200 (1535 MB) > avail memory = 1568534528 (1495 MB) > mptable_probe: MP Config Table has bad signature: ^\^A > npx0: <math processor> on motherboard > npx0: INT 16 interface > acpi0: <KT400 AWRDACPI> on motherboard > acpi0: Power Button (fixed) > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 > cpu0: <ACPI CPU (3 Cx states)> on acpi0 > acpi_button0: <Power Button> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > agp0: <VIA 8377 (Apollo KT400/KT400A/KT600) host to PCI bridge> mem > 0xe0000000-0xe3ffffff at device 0.0 on pci0 > pcib1: <PCI-PCI bridge> at device 1.0 on pci0 > pci1: <PCI bus> on pcib1 > pci0: <display, VGA> at device 8.0 (no driver attached) > xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xd000-0xd07f mem > 0xe7060000-0xe706007f irq 11 at device 10.0 on pci0 > miibus0: <MII bus> on xl0 > ukphy0: <Generic IEEE 802.3u media interface> on miibus0 > ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > xl0: Ethernet address: 00:04:75:73:e3:ad > pci0: <network, ethernet> at device 11.0 (no driver attached) > em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port > 0xd800-0xd83f mem 0xe7000000-0xe703ffff,0xe7040000-0xe705ffff irq 11 at > device 12.0 on pci0 > em0: Ethernet address: 00:04:23:b1:d5:92 > em0: Speed:N/A Duplex:N/A > isab0: <PCI-ISA bridge> at device 17.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <VIA 8235 UDMA133 controller> port > 0xe800-0xe80f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 17.1 on pci0 > ata0: channel #0 on atapci0 > ata1: channel #1 on atapci0 > acpi_tz0: <Thermal Zone> on acpi0 > speaker0: <PC speaker> port 0x61 on acpi0 > fdc0: <floppy drive controller> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on > acpi0 > atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > pmtimer0 on isa0 > orm0: <ISA Option ROMs> at iomem 0xcc000-0xcc7ff,0xc0000-0xc87ff on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > Timecounter "TSC" frequency 1470010559 Hz quality 800 > Timecounters tick every 1.000 msec > ad0: 114473MB <ST3120024A/3.33> [232581/16/63] at ata0-master UDMA100 > ad1: 39083MB <Maxtor 4D040H2/DAH017K0> [79408/16/63] at ata0-slave UDMA100 > Mounting root from ufs:/dev/ad1s1a > WARNING: / was not properly dismounted > WARNING: /tmp was not properly dismounted > WARNING: /usr was not properly dismounted > WARNING: /var was not properly dismounted > /var: mount pending error: blocks 20 files 1 > WARNING: /opt was not properly dismounted > WARNING: /zbackup was not properly dismounted > em0: Link is up 1000 Mbps Full Duplex > em0: Link is up 1000 Mbps Full Duplex > pflog0: promiscuous mode enabled > pid 64090 (squid), uid 0: exited on signal 6 (core dumped) > pid 75212 (squid), uid 0: exited on signal 6 (core dumped) > > > Palle Girgensohn wrote: >> >> --On tisdag, juni 07, 2005 18.03.55 +0200 Kay Abendroth >> <kay.abendroth@raxion.net> wrote: >> >>> >>> Hello, >>> >>> today I had another panic on my FreeBSD-Box. The last one occured 4 days >>> ago. >>> >>> Please reply if sth. is missing. >>> >>> Kind regards, >>> Kay >> >> >> Hi! >> >> What brand is your machine? Can you supply a dmesg? >> >> /Palle >> >> _______________________________________________ >> freebsd-stable@freebsd.org mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-stable >> To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org" >> > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?C5742251FA6CF493BD1056F0>