Date: Tue, 11 Nov 2003 10:39:42 +0000 (GMT) From: Nicol Morozov <nicol@aokp.ru> To: FreeBSD-gnats-submit@FreeBSD.org Subject: kern/59166: System hangs when detecting hand drives on Adaptec AIC7902 if SMP is enabled Message-ID: <20031111103942.4ECE11144B@srv.douglas.ru> Resent-Message-ID: <200311110750.hAB7oN75057393@freefall.freebsd.org>
index | next in thread | raw e-mail
>Number: 59166
>Category: kern
>Synopsis: System hangs when detecting hand drives on Adaptec AIC7902 if SMP is enabled
>Confidential: no
>Severity: critical
>Priority: high
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Mon Nov 10 23:50:22 PST 2003
>Closed-Date:
>Last-Modified:
>Originator: Nicol Morozov
>Release: FreeBSD 5.1-RELEASE-p10 i386
>Organization:
Auric Vision
>Environment:
FreeBSD 5.1-RELEASE-p10 #3: Mon Nov 10 20:12:00 GMT 2003
root@douglas.ru:/usr/src/sys/i386/compile/DOUGLAS
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0446000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04461f4.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 1993576224 Hz
CPU: Intel(R) Xeon(TM) CPU 2.00GHz (1993.58-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 2147418112 (2047 MB)
avail memory = 2085629952 (1989 MB)
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <IntelR AWRDACPI> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 18 entries at 0xc00fde30
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_cpu2: <CPU> on acpi0
acpi_cpu3: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <unknown> at device 0.1 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.P64A - AE_NOT_FOUND
pci1: <ACPI PCI bus> on pcib1
pci1: <base peripheral, interrupt controller> at device 28.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 29.0 on pci1
pci2: <ACPI PCI bus> on pcib2
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.5.31> port 0xa000-0xa03f mem 0xfa000000-0xfa01ffff irq 15 at device 9.0 on pci2
em0: Speed:N/A Duplex:N/A
em1: <Intel(R) PRO/1000 Network Connection, Version - 1.5.31> port 0xa400-0xa43f mem 0xfa020000-0xfa03ffff irq 15 at device 9.1 on pci2
em1: Speed:10 Mbps Duplex:Half
pci1: <base peripheral, interrupt controller> at device 30.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 31.0 on pci1
pci3: <ACPI PCI bus> on pcib3
ahd0: <Adaptec AIC7902 Ultra320 SCSI adapter> port 0xb400-0xb4ff,0xb000-0xb0ff mem 0xf9000000-0xf9001fff irq 15 at device 7.0 on pci3
aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
ahd1: <Adaptec AIC7902 Ultra320 SCSI adapter> port 0xbc00-0xbcff,0xb800-0xb8ff mem 0xf9002000-0xf9003fff irq 15 at device 7.1 on pci3
aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
pci0: <unknown> at device 2.1 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pci4: <display, VGA> at device 5.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 UDMA100 controller> port 0xf000-0xf00f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
orm0: <Option ROMs> at iomem 0xd3000-0xd47ff,0xd1000-0xd27ff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to deny, logging unlimited
acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
ad0: 76319MB <ST380011A> [155061/16/63] at ata0-master UDMA100
acd0: CDROM <QSI CD-ROM SCR-242> at ata0-slave PIO4
Waiting 15 seconds for SCSI devices to settle
da0 at ahd1 bus 0 target 0 lun 0
da0: <SEAGATE ST336607LC 0006> Fixed Direct Access SCSI-3 device
da0: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da0: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C)
da1 at ahd1 bus 0 target 1 lun 0
da1: <SEAGATE ST336607LC 0006> Fixed Direct Access SCSI-3 device
da1: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da1: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C)
Mounting root from ufs:/dev/da0s1a
>Description:
This is a Dual Xeon 2000Mhz with 2GB Memory. Integrated dual chanel Adaptec AIC7902 Ultra320 SCSI adapter. If I build SMP Kernel
options SMP
options APIC_IO
System hangs after line
Waiting 15 seconds for SCSI devices to settle
If I comment this lines in kernel configuration build install kernel system works normaly
Kernel Configuration :
machine i386
cpu I486_CPU
cpu I586_CPU
cpu I686_CPU
ident DOUGLAS
options SCHED_4BSD
options INET
options FFS
options SOFTUPDATES
options UFS_ACL
options UFS_DIRHASH
options MSDOSFS
options CD9660
options PROCFS
options PSEUDOFS
options COMPAT_43
options COMPAT_FREEBSD4
options SCSI_DELAY=15000
options KTRACE
options SYSVSHM
options SYSVMSG
options SYSVSEM
options _KPOSIX_PRIORITY_SCHEDULING
options KBD_INSTALL_CDEV
options AHD_REG_PRETTY_PRINT
options INVARIANT_SUPPORT
#options SMP
#options APIC_IO
device isa
device pci
device fdc
device ata
device atadisk
device atapicd
device atapifd
device atapist
options ATA_STATIC_ID
device ahd
device scbus
device ch
device da
device sa
device cd
device pass
device ses
device atkbdc
device atkbd
device psm
device vga
device splash
device sc
device agp
device npx
device apm
device pmtimer
device sio
device ppc
device ppbus
device lpt
device plip
device ppi
device em
device random
device loop
device ether
device tun
device pty
device bpf
options IPFIREWALL
options IPFIREWALL_VERBOSE
options IPFIREWALL_FORWARD
options IPDIVERT
>How-To-Repeat:
Uncomment SMP and APIC_IO options in above kernel configurastion. Compile, install and reboot with new kernel.
Ps. Starnge thing : First time when i reboot with this kernel system boots normaly
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
>How-To-Fix: Don't know
help
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20031111103942.4ECE11144B>