Date: Tue, 26 Feb 2002 11:18:45 -0500 From: George Uhl <uhl@rattler.gsfc.nasa.gov> To: freebsd-multimedia@freebsd.org Subject: bktr driver woes in 4.5-RELEASE Message-ID: <4.3.2.7.2.20020226110702.02783b38@localhost>
next in thread | raw e-mail | index | archive | help
I have an aged Hauppauge WinTV card that was working fine
on a 3.4-STABLE host. I installed 4.5-RELEASE on this host
and now the system hangs when I run a video application such
as fxtv or vic. I'd appreciate any suggestions to help me restore
my video application support.
Thanks,
George
Excerpts from my kernel config file:
# PCI video cards
device smbus
device iicbus
device iicbb
device bktr
device ic
device iic
device iicsmb # smb over i2c bridge
options BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_NTSC
dmesg output:
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.5-RELEASE #4: Tue Feb 26 10:32:19 EST 2002
uhl@bishop-fe.qbed.nren.nasa.gov:/usr/src/sys/compile/NASATV
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (400.91-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 134152192 (131008K bytes)
config> di sn0
No such device: sn0
Invalid command or syntax. Type `?' for help.
config> di lnc0
No such device: lnc0
Invalid command or syntax. Type `?' for help.
config> di ie0
No such device: ie0
Invalid command or syntax. Type `?' for help.
config> di fe0
No such device: fe0
Invalid command or syntax. Type `?' for help.
config> di ed0
No such device: ed0
Invalid command or syntax. Type `?' for help.
config> di cs0
No such device: cs0
Invalid command or syntax. Type `?' for help.
config> q
avail memory = 126054400 (123100K bytes)
Preloaded elf kernel "kernel" at 0xc0468000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc046809c.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 7 entries at 0xc00fdee0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI Mach64-GB graphics accelerator> at 0.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 7.2 irq 10
chip1: <Intel 82371AB Power management controller> port 0x5000-0x500f at
device 7.3 on pci0
pcm0: <Creative EMU10K1> port 0xd400-0xd41f irq 10 at device 9.0 on pci0
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xdc00-0xdc1f mem
0xea000000-0xea0fffff,0xea101000-0xea101fff irq 5 at device 13.0 on pci0
fxp0: Ethernet address 00:a0:c9:c7:19:93
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xe000-0xe0ff mem
0xea100000-0xea100fff irq 11 at device 15.0 on pci0
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/255 SCBs
bktr0: <BrookTree 848A> mem 0xea102000-0xea102fff irq 10 at device 17.0 on pci0
iicbb0: <I2C generic bit-banging driver> on bti2c0
iicbus0: <Philips I2C bus> on iicbb0 master-only
iicsmb0: <I2C to SMB bridge> on iicbus0
smbus0: <System Management Bus> on iicsmb0
iic0: <I2C general purpose I/O> on iicbus0
smbus1: <System Management Bus> on bti2c0
bktr0: Hauppauge Model 56111 E
bktr0: Hauppauge WinCast/TV, Philips NTSC tuner, dbx stereo.
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcc7ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
acd0: CDROM <TOSHIBA CD-ROM XM-6402B> at ata0-master using PIO4
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da0s1a
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST39173W 6244> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da0: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C)
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xd000-0xd01f irq 10
at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
-----------------------------------------------
George Uhl, Lead Engineer, ESDIS Network Prototyping Lab
email: uhl@rattler.gsfc.nasa.gov
phone: 301-614-5155
pgp public key: http://corn.eos.nasa.gov/uhl/PGP.html
pgp key fingerprint: FA7F 040F 11CD 47C2 09BC 698F 570F EC3D E098 8937
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-multimedia" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4.3.2.7.2.20020226110702.02783b38>