Date: Mon, 10 Feb 2003 09:00:07 -0500 From: Paul Mather <paul@gromit.dlib.vt.edu> To: freebsd-current@freebsd.org Subject: 5.0-RELEASE on Gateway 450 laptop Message-ID: <20030210140007.GB47394@gromit.dlib.vt.edu>
next in thread | raw e-mail | index | archive | help
I recently installed 5.0-RELEASE on a Gateway 450 laptop. When booting
I get various ACPI errors such as:
ACPI-1287: *** Error: Method execution failed, AE_NOT_EXIST
or
ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
ACPI-1287: *** Error: Method execution failed, AE_ERROR
and
ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
ACPI-1287: *** Error: Method execution failed, AE_AML_NO_RETURN_VALUE
The machine boots and seems to work okay on the whole, although
sometimes under high load (e.g., doing a buildkernel or making a port
like mozilla, java, or XFree86) the laptop will mysteriously and
spontaneously power down. (Power off, not reboot.)
In addition, power management doesn't seem to work (e.g., going into
standby), but I've not used power management before, so maybe I'm not
configuring everything properly.
Also, on an unrelated note, has anyone managed to get the funny "mouse
wheel" below the touch pad on a Gateway 450 to work in X?
Appended to the end of this message is a copy of /var/run/dmesg.boot.
If anyone can let me know how to cure the ACPI errors I'd be really
happy.
Cheers,
Paul.
e-mail: paul@gromit.dlib.vt.edu
"Without music to decorate it, time is just a bunch of boring production
deadlines or dates by which bills must be paid."
--- Frank Vincent Zappa
>>>>>
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-RELEASE #0: Tue Feb 4 01:23:53 EST 2003
root@laptop.Chelsea-Ct.Org:/usr/obj/usr/src/sys/LAPTOP
Preloaded elf kernel "/boot/kernel/kernel" at 0xc04f3000.
Preloaded elf module "/boot/kernel/snd_maestro3.ko" at 0xc04f30a8.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc04f315c.
Preloaded elf module "/boot/kernel/radeon.ko" at 0xc04f3208.
Preloaded elf module "/boot/kernel/firewire.ko" at 0xc04f32b4.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04f3364.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 1994126756 Hz
CPU: Pentium 4 (1994.13-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xffffffffbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,<b31>>
real memory = 536346624 (511 MB)
avail memory = 515608576 (491 MB)
Initializing GEOMetry subsystem
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <GATEWA 450 > on motherboard
ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
ACPI-0625: *** Info: GPE Block1 defined as GPE16 to GPE31
Using $PIR table, 11 entries at 0xc00fdf10
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82845 host to AGP bridge> mem 0xec000000-0xefffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
drm0: <ATI Radeon LY Mobility 6 (AGP)> port 0x3000-0x30ff mem 0xe8100000-0xe810ffff,0xf0000000-0xf7ffffff irq 10 at device 0.0 on pci1
info: [drm] AGP at 0xec000000 64MB
info: [drm] Initialized radeon 1.1.1 20010405 on minor 0
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x1800-0x181f irq 10 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x1820-0x183f irq 5 at device 29.1 on pci0
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
cbb0: <TI1520 PCI-CardBus Bridge> irq 10 at device 2.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <TI1520 PCI-CardBus Bridge> irq 10 at device 2.1 on pci2
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pcm0: <ESS Technology Allegro-1> port 0x5000-0x50ff irq 5 at device 3.0 on pci2
fwohci0: vendor=104c, dev=8026
fwohci0: <1394 Open Host Controller Interface> mem 0xe8200000-0xe8203fff,0xe8207000-0xe82077ff irq 10 at device 5.0 on pci2
fwohci0: PCI bus latency was changing to 250.
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:e0:b8:04:00:01:8d:16
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fxp0: <Intel Pro/100 Ethernet> port 0x5400-0x543f mem 0xe8206000-0xe8206fff irq 10 at device 8.0 on pci2
fxp0: Ethernet address 00:e0:b8:4b:52:c5
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 ATA100 controller> port 0x1860-0x186f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 mem 0xe8000000-0xe80003ff at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <simple comms> at device 31.6 (no driver attached)
acpi_lid0: <Control Method Lid Switch> on acpi0
ACPI-1287: *** Error: Method execution failed, AE_NOT_EXIST
acpi_acad0: <AC adapter> on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
acpi_cmbat1: <Control method Battery> on acpi0
acpi_button0: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
orm0: <Option ROM> at iomem 0xc0000-0xcffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
fwohci0: BUS reset
fwohci0: node_id = 0xc000ffc0, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
cbb0: Unsupported card type detected
cbb1: Unsupported card type detected
ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
ACPI-1287: *** Error: Method execution failed, AE_ERROR
ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
ACPI-1287: *** Error: Method execution failed, AE_ERROR
ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
ACPI-1287: *** Error: Method execution failed, AE_ERROR
ata1-slave: timeout waiting for interrupt
ata1-slave: ATAPI identify failed
ad0: 28615MB <IC25N030ATCS04-0> [58140/16/63] at ata0-master UDMA100
acd0: CD-RW <UJDA730 DVD/CDRW> at ata1-master PIO4
ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
ACPI-1287: *** Error: Method execution failed, AE_AML_NO_RETURN_VALUE
ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
ACPI-1287: *** Error: Method execution failed, AE_AML_NO_RETURN_VALUE
ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
ACPI-1287: *** Error: Method execution failed, AE_AML_NO_RETURN_VALUE
cd0 at ata1 bus 0 target 0 lun 0
cd0: <MATSHITA UJDA730 DVD/CDRW 1.02> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: cd present [294831 x 2048 byte records]
Mounting root from ufs:/dev/ad0s2a
<<<<<
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030210140007.GB47394>