Date: Sun, 11 Apr 2010 10:05:29 -0700 From: Waldo Nell <pwnell@telkomsa.net> To: stable@freebsd.org Subject: Possible crashing bug in RELENG_8 for Realtek NICs Message-ID: <FED720C5-9DA2-48E5-A500-18DB9F1DDBC6@telkomsa.net>
next in thread | raw e-mail | index | archive | help
I have possibly found a bug in FreeBSD RELENG_8 where the system would = randomly grind to a halt between 1 hour and 8 hours uptime. This did = not occur in 7.2 on the same hardware. I see lots of re0: watchdog = timeout messages on the console and then suddenly everything freezes - = the keybaord input does not work, I cannot ssh or open any new TCP = connections. Existing connections seem to work fine and still passes on = traffic through the system. I posted a bug report here: = http://forum.pfsense.org/index.php/topic,24158.msg124878.html It seems like it is the Realtek onboard adapter in my system. The = moment I disable it in the BIOS (it is an onboard NIC) then the system = does not crash anymore. I added an Intel Pro/1000 NIC and since doing = that the machine is stable again. But if I re-enable the Realtek the = system crashes within 8 hours. Here is some debug output that might help: # dmesg Copyright (c) 1992-2010 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights = reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-STABLE #1: Mon Apr 5 12:40:40 EDT 2010 = ermal@FreeBSD_8.0_pfSense_2.0-snaps.pfsense.org:/usr/obj.pfSense/usr/pfSen= sesrc/src/sys/pfSense_SMP.8 i386 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Celeron(R) CPU 430 @ 1.80GHz (1795.51-MHz = 686-class CPU) Origin =3D "GenuineIntel" Id =3D 0x10661 Family =3D 6 Model =3D 16 = Stepping =3D 1 = Features=3D0xafebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE= ,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE> Features2=3D0xe31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM> AMD Features=3D0x20000000<LM> AMD Features2=3D0x1<LAHF> TSC: P-state invariant real memory =3D 1073741824 (1024 MB) avail memory =3D 1023414272 (976 MB) ACPI APIC Table: <AAMMII OEMAPIC > ioapic0 <Version 2.0> irqs 0-23 on motherboard ipw_bss: You need to read the LICENSE file in = /usr/share/doc/legal/intel_ipw/. ipw_bss: If you agree with the license, set = legal.intel_ipw.license_ack=3D1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_bss_fw, 0xc0728b70, 0) error 1 ipw_ibss: You need to read the LICENSE file in = /usr/share/doc/legal/intel_ipw/. ipw_ibss: If you agree with the license, set = legal.intel_ipw.license_ack=3D1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc0728c30, 0) error 1 ipw_monitor: You need to read the LICENSE file in = /usr/share/doc/legal/intel_ipw/. ipw_monitor: If you agree with the license, set = legal.intel_ipw.license_ack=3D1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc0728cf0, 0) error 1 wpi: You need to read the LICENSE file in = /usr/share/doc/legal/intel_wpi/. wpi: If you agree with the license, set legal.intel_wpi.license_ack=3D1 = in /boot/loader.conf. module_register_init: MOD_LOAD (wpi_fw, 0xc08f7640, 0) error 1 wlan: mac acl policy registered kbd1 at kbdmux0 cryptosoft0: <software crypto> on motherboard padlock0: No ACE support. acpi0: <AAMMII OEMRSDTA> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 3f700000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on = acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0xcc00-0xcc07 mem = 0xfe980000-0xfe9fffff,0xd0000000-0xdfffffff,0xfe940000-0xfe97ffff irq 16 = at device 2.0 on pci0 agp0: <Intel 82945G (945G GMCH) SVGA controller> on vgapci0 agp0: detected 7932k stolen memory agp0: aperture size is 256M pci0: <multimedia, HDA> at device 27.0 (no driver attached) pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci1: <ACPI PCI bus> on pcib1 em0: <Intel(R) PRO/1000 Network Connection 6.9.14> port 0xdc00-0xdc1f = mem 0xfeae0000-0xfeafffff,0xfea00000-0xfea7ffff,0xfeadc000-0xfeadffff = irq 16 at device 0.0 on pci1 em0: Using MSIX interrupts em0: [ITHREAD] em0: [ITHREAD] em0: [ITHREAD] pcib2: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 pci2: <ACPI PCI bus> on pcib2 uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0xc880-0xc89f irq = 23 at device 29.0 on pci0 uhci0: [ITHREAD] uhci0: LegSup =3D 0x2f00 usbus0: <Intel 82801G (ICH7) USB controller USB-A> on uhci0 uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0xc800-0xc81f irq = 19 at device 29.1 on pci0 uhci1: [ITHREAD] uhci1: LegSup =3D 0x2f00 usbus1: <Intel 82801G (ICH7) USB controller USB-B> on uhci1 uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0xc480-0xc49f irq = 18 at device 29.2 on pci0 uhci2: [ITHREAD] uhci2: LegSup =3D 0x2f00 usbus2: <Intel 82801G (ICH7) USB controller USB-C> on uhci2 uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0xc400-0xc41f irq = 16 at device 29.3 on pci0 uhci3: [ITHREAD] uhci3: LegSup =3D 0x2f00 usbus3: <Intel 82801G (ICH7) USB controller USB-D> on uhci3 ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem = 0xfe937c00-0xfe937fff irq 23 at device 29.7 on pci0 ehci0: [ITHREAD] usbus4: EHCI version 1.0 usbus4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0 pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci3: <ACPI PCI bus> on pcib3 vr0: <VIA VT6105 Rhine III 10/100BaseTX> port 0xe800-0xe8ff mem = 0xfebffc00-0xfebffcff irq 18 at device 1.0 on pci3 vr0: Quirks: 0x0 vr0: Revision: 0x86 miibus0: <MII bus> on vr0 ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto vr0: [ITHREAD] vr1: <VIA VT6105 Rhine III 10/100BaseTX> port 0xe400-0xe4ff mem = 0xfebff800-0xfebff8ff irq 19 at device 2.0 on pci3 vr1: Quirks: 0x0 vr1: Revision: 0x86 miibus1: <MII bus> on vr1 ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus1 ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto vr1: [ITHREAD] isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH7 UDMA100 controller> port = 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] atapci1: <Intel ICH7 SATA300 controller> port = 0xc080-0xc087,0xc000-0xc003,0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb80f = irq 19 at device 31.2 on pci0 atapci1: [ITHREAD] ata2: <ATA channel 0> on atapci1 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci1 ata3: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_button0: <Power Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: [FILTER] pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on = isa0 ppc0: parallel port not found. p4tcc0: <CPU Frequency Thermal Control> on cpu0 Timecounter "TSC" frequency 1795511421 Hz quality 800 Timecounters tick every 1.000 msec IPsec: Initialized Security Association Processing. usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 480Mbps High Speed USB v2.0 acd0: DVDR <TSSTcorp CDDVDW SH-S222A/SB00> at ata0-master UDMA66=20 ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1: <Intel> at usbus3 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ugen4.1: <Intel> at usbus4 uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 ad4: 305245MB <WDC WD3200AAJS-41VWA1 58.01D05> at ata2-master UDMA100 = SATA Root mount waiting for: usbus4 usbus3 usbus2 usbus1 usbus0 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered Root mount waiting for: usbus4 Root mount waiting for: usbus4 Root mount waiting for: usbus4 uhub4: 8 ports with 8 removable, self powered Trying to mount root from ufs:/dev/ad4s1a pflog0: promiscuous mode enabled em0: link state changed to UP vr1: promiscuous mode enabled vr0: promiscuous mode enabled vr0: promiscuous mode disabled vr0: link state changed to UP Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...0 0 done All buffers synced. Uptime: 18h2m24s Copyright (c) 1992-2010 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights = reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-STABLE #1: Mon Apr 5 12:40:40 EDT 2010 = ermal@FreeBSD_8.0_pfSense_2.0-snaps.pfsense.org:/usr/obj.pfSense/usr/pfSen= sesrc/src/sys/pfSense_SMP.8 i386 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Celeron(R) CPU 430 @ 1.80GHz (1795.51-MHz = 686-class CPU) Origin =3D "GenuineIntel" Id =3D 0x10661 Family =3D 6 Model =3D 16 = Stepping =3D 1 = Features=3D0xafebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE= ,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE> Features2=3D0xe31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM> AMD Features=3D0x20000000<LM> AMD Features2=3D0x1<LAHF> TSC: P-state invariant real memory =3D 1073741824 (1024 MB) avail memory =3D 1023414272 (976 MB) ACPI APIC Table: <AAMMII OEMAPIC > ioapic0 <Version 2.0> irqs 0-23 on motherboard ipw_bss: You need to read the LICENSE file in = /usr/share/doc/legal/intel_ipw/. ipw_bss: If you agree with the license, set = legal.intel_ipw.license_ack=3D1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_bss_fw, 0xc0728b70, 0) error 1 ipw_ibss: You need to read the LICENSE file in = /usr/share/doc/legal/intel_ipw/. ipw_ibss: If you agree with the license, set = legal.intel_ipw.license_ack=3D1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc0728c30, 0) error 1 ipw_monitor: You need to read the LICENSE file in = /usr/share/doc/legal/intel_ipw/. ipw_monitor: If you agree with the license, set = legal.intel_ipw.license_ack=3D1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc0728cf0, 0) error 1 wpi: You need to read the LICENSE file in = /usr/share/doc/legal/intel_wpi/. wpi: If you agree with the license, set legal.intel_wpi.license_ack=3D1 = in /boot/loader.conf. module_register_init: MOD_LOAD (wpi_fw, 0xc08f7640, 0) error 1 wlan: mac acl policy registered kbd1 at kbdmux0 cryptosoft0: <software crypto> on motherboard padlock0: No ACE support. acpi0: <AAMMII OEMRSDTA> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 3f700000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on = acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0xbc00-0xbc07 mem = 0xfe880000-0xfe8fffff,0xd0000000-0xdfffffff,0xfe840000-0xfe87ffff irq 16 = at device 2.0 on pci0 agp0: <Intel 82945G (945G GMCH) SVGA controller> on vgapci0 agp0: detected 7932k stolen memory agp0: aperture size is 256M pci0: <multimedia, HDA> at device 27.0 (no driver attached) pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci1: <ACPI PCI bus> on pcib1 em0: <Intel(R) PRO/1000 Network Connection 6.9.14> port 0xcc00-0xcc1f = mem 0xfe9e0000-0xfe9fffff,0xfe900000-0xfe97ffff,0xfe9dc000-0xfe9dffff = irq 16 at device 0.0 on pci1 em0: Using MSIX interrupts em0: [ITHREAD] em0: [ITHREAD] em0: [ITHREAD] pcib2: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 pci2: <ACPI PCI bus> on pcib2 re0: <RealTek 8101E/8102E/8102EL/8103E PCIe 10/100baseTX> port = 0xd800-0xd8ff mem 0xfeaff000-0xfeafffff irq 19 at device 0.0 on pci2 re0: Using 1 MSI messages re0: Chip rev. 0x34000000 re0: MAC rev. 0x00000000 miibus0: <MII bus> on re0 rlphy0: <RTL8201L 10/100 media interface> PHY 1 on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto re0: [FILTER] uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0xb880-0xb89f irq = 23 at device 29.0 on pci0 uhci0: [ITHREAD] uhci0: LegSup =3D 0x2f00 usbus0: <Intel 82801G (ICH7) USB controller USB-A> on uhci0 uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0xb800-0xb81f irq = 19 at device 29.1 on pci0 uhci1: [ITHREAD] uhci1: LegSup =3D 0x2f00 usbus1: <Intel 82801G (ICH7) USB controller USB-B> on uhci1 uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0xb480-0xb49f irq = 18 at device 29.2 on pci0 uhci2: [ITHREAD] uhci2: LegSup =3D 0x2f00 usbus2: <Intel 82801G (ICH7) USB controller USB-C> on uhci2 uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0xb400-0xb41f irq = 16 at device 29.3 on pci0 uhci3: [ITHREAD] uhci3: LegSup =3D 0x2f00 usbus3: <Intel 82801G (ICH7) USB controller USB-D> on uhci3 ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem = 0xfe837c00-0xfe837fff irq 23 at device 29.7 on pci0 ehci0: [ITHREAD] usbus4: EHCI version 1.0 usbus4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0 pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci3: <ACPI PCI bus> on pcib3 vr0: <VIA VT6105 Rhine III 10/100BaseTX> port 0xe800-0xe8ff mem = 0xfebffc00-0xfebffcff irq 18 at device 1.0 on pci3 vr0: Quirks: 0x0 vr0: Revision: 0x86 miibus1: <MII bus> on vr0 ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus1 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto vr0: [ITHREAD] vr1: <VIA VT6105 Rhine III 10/100BaseTX> port 0xe400-0xe4ff mem = 0xfebff800-0xfebff8ff irq 19 at device 2.0 on pci3 vr1: Quirks: 0x0 vr1: Revision: 0x86 miibus2: <MII bus> on vr1 ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus2 ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto vr1: [ITHREAD] isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH7 UDMA100 controller> port = 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] atapci1: <Intel ICH7 SATA300 controller> port = 0xb080-0xb087,0xb000-0xb003,0xac00-0xac07,0xa880-0xa883,0xa800-0xa80f = irq 19 at device 31.2 on pci0 atapci1: [ITHREAD] ata2: <ATA channel 0> on atapci1 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci1 ata3: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_button0: <Power Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: [FILTER] pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on = isa0 ppc0: parallel port not found. p4tcc0: <CPU Frequency Thermal Control> on cpu0 Timecounter "TSC" frequency 1795509333 Hz quality 800 Timecounters tick every 1.000 msec IPsec: Initialized Security Association Processing. usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 480Mbps High Speed USB v2.0 acd0: DVDR <TSSTcorp CDDVDW SH-S222A/SB00> at ata0-master UDMA66=20 ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1: <Intel> at usbus3 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ugen4.1: <Intel> at usbus4 uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 ad4: 305245MB <WDC WD3200AAJS-41VWA1 58.01D05> at ata2-master UDMA100 = SATA Root mount waiting for: usbus4 usbus3 usbus2 usbus1 usbus0 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered Root mount waiting for: usbus4 Root mount waiting for: usbus4 Root mount waiting for: usbus4 uhub4: 8 ports with 8 removable, self powered Trying to mount root from ufs:/dev/ad4s1a pflog0: promiscuous mode enabled em0: link state changed to UP vr1: promiscuous mode enabled vr0: promiscuous mode enabled re0: promiscuous mode enabled # uname -a FreeBSD gw.pwnconsulting.za.net 8.0-STABLE FreeBSD 8.0-STABLE #1: Mon = Apr 5 12:40:40 EDT 2010 = ermal@FreeBSD_8.0_pfSense_2.0-snaps.pfsense.org:/usr/obj.pfSense/usr/pfSen= sesrc/src/sys/pfSense_SMP.8 i386 # pciconf -lv hostb0@pci0:0:0:0: class=3D0x060000 card=3D0x26241019 = chip=3D0x27708086 rev=3D0x02 hdr=3D0x00 class =3D bridge subclass =3D HOST-PCI vgapci0@pci0:0:2:0: class=3D0x030000 card=3D0x26241019 = chip=3D0x27728086 rev=3D0x02 hdr=3D0x00 class =3D display subclass =3D VGA none0@pci0:0:27:0: class=3D0x040300 card=3D0x29501019 = chip=3D0x27d88086 rev=3D0x01 hdr=3D0x00 class =3D multimedia subclass =3D HDA pcib1@pci0:0:28:0: class=3D0x060400 card=3D0x26241019 = chip=3D0x27d08086 rev=3D0x01 hdr=3D0x01 class =3D bridge subclass =3D PCI-PCI pcib2@pci0:0:28:3: class=3D0x060400 card=3D0x26241019 = chip=3D0x27d68086 rev=3D0x01 hdr=3D0x01 class =3D bridge subclass =3D PCI-PCI uhci0@pci0:0:29:0: class=3D0x0c0300 card=3D0x26241019 = chip=3D0x27c88086 rev=3D0x01 hdr=3D0x00 class =3D serial bus subclass =3D USB uhci1@pci0:0:29:1: class=3D0x0c0300 card=3D0x26241019 = chip=3D0x27c98086 rev=3D0x01 hdr=3D0x00 class =3D serial bus subclass =3D USB uhci2@pci0:0:29:2: class=3D0x0c0300 card=3D0x26241019 = chip=3D0x27ca8086 rev=3D0x01 hdr=3D0x00 class =3D serial bus subclass =3D USB uhci3@pci0:0:29:3: class=3D0x0c0300 card=3D0x26241019 = chip=3D0x27cb8086 rev=3D0x01 hdr=3D0x00 class =3D serial bus subclass =3D USB ehci0@pci0:0:29:7: class=3D0x0c0320 card=3D0x26241019 = chip=3D0x27cc8086 rev=3D0x01 hdr=3D0x00 class =3D serial bus subclass =3D USB pcib3@pci0:0:30:0: class=3D0x060401 card=3D0x26241019 = chip=3D0x244e8086 rev=3D0xe1 hdr=3D0x01 class =3D bridge subclass =3D PCI-PCI isab0@pci0:0:31:0: class=3D0x060100 card=3D0x26241019 = chip=3D0x27b88086 rev=3D0x01 hdr=3D0x00 class =3D bridge subclass =3D PCI-ISA atapci0@pci0:0:31:1: class=3D0x01018a card=3D0x26241019 = chip=3D0x27df8086 rev=3D0x01 hdr=3D0x00 class =3D mass storage subclass =3D ATA atapci1@pci0:0:31:2: class=3D0x01018f card=3D0x26241019 = chip=3D0x27c08086 rev=3D0x01 hdr=3D0x00 class =3D mass storage subclass =3D ATA none1@pci0:0:31:3: class=3D0x0c0500 card=3D0x26241019 = chip=3D0x27da8086 rev=3D0x01 hdr=3D0x00 class =3D serial bus subclass =3D SMBus em0@pci0:1:0:0: class=3D0x020000 card=3D0xa01f8086 chip=3D0x10d38086 = rev=3D0x00 hdr=3D0x00 class =3D network subclass =3D ethernet re0@pci0:2:0:0: class=3D0x020000 card=3D0x81361019 chip=3D0x813610ec = rev=3D0x01 hdr=3D0x00 class =3D network subclass =3D ethernet vr0@pci0:3:1:0: class=3D0x020000 card=3D0x14071186 chip=3D0x31061106 = rev=3D0x86 hdr=3D0x00 class =3D network subclass =3D ethernet vr1@pci0:3:2:0: class=3D0x020000 card=3D0x14071186 chip=3D0x31061106 = rev=3D0x86 hdr=3D0x00 class =3D network subclass =3D ethernet Let me know if there are any additional information you need. Regards, Waldo
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?FED720C5-9DA2-48E5-A500-18DB9F1DDBC6>