Date: Wed, 2 Apr 2008 11:55:18 +0200 From: "Josep Pujadas i Jubany" <josep@bellera.cat> To: freebsd-current@freebsd.org Subject: RE: Only 100baseTX with bge BCM5722 Message-ID: <20080402094618.M73854@bellera.cat> In-Reply-To: <5D267A3F22FD854F8F48B3D2B523819324EF6344D0@IRVEXCHCCR01.corp.ad.broadcom.com> References: <20080401093503.M45196@bellera.cat> <5D267A3F22FD854F8F48B3D2B523819324EF6342B6@IRVEXCHCCR01.corp.ad.broadcom.com> <20080401193322.M70732@bellera.cat> <5D267A3F22FD854F8F48B3D2B523819324EF6344D0@IRVEXCHCCR01.corp.ad.broadcom.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, 1 Apr 2008 18:30:34 -0700, David Christensen wrote > > > > > > What's the dmesg output? Is it using ukphy or brgphy? > > > > > > > Partial dmesg, concerning the NIC: > > > > pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 > > pci14: <ACPI PCI bus> on pcib4 > > bge0: <HP NC105i PCIe Gigabit Server Adapter, ASIC rev. 0xa200> mem > > 0xed000000-0xed00ffff irq 17 at device 0.0 on pci14 > > miibus0: <MII bus> on bge0 > > ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0 > > ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, > > 1000baseT-FDX, auto > > bge0: Ethernet address: XXXXXXXXXXXXXXXXXXXXX > > bge0: [ITHREAD] > > > > bge0: link state changed to UP > > > > Must I try 1000baseT-FDX instead than 1000baseTX in my ifconfig line? > > The 5722 PHY ID is available in -HEAD (see > http://fxr.watson.org/fxr/source/dev/mii/miidevs#L139) > but isn't present in RELENG_7_0 (see > http://fxr.watson.org/fxr/source/dev/mii/miidevs?v=RELENG70#L115). > > Look at the diffs between sys/dev/mii/miidevs and sys/dev/mii/brgphy > between HEAD and RELENG_7_0 and pull in the changes for the 5722 and > build them into your kernel. If successful you should see brgphy0 > and not ukphy0. > > Dave > _______________________________________________ Dave, Many thanks for your help! I'm working at 1 Gigabit! I'm very happy, it is my first driver modification using FreeBSD! I had to modify also /usr/src/sys/dev/mii/brgphy.c The conclusion is if using FreeBSD 7.0, BCM5722 must be included in the following source files: /usr/src/sys/dev/bge/if_bge.c /usr/src/sys/dev/bge/if_bgereg.h /usr/src/sys/dev/mii/miidevs /usr/src/sys/dev/mii/brgphy.c Regards, Josep Pujadas
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20080402094618.M73854>