Date: Mon, 15 Mar 1999 11:49:07 -0500 From: "John C. Place" <placej@ctcdist.com> To: questions@freebsd.org Subject: Error Locating shared Lib on 3.1R Message-ID: <19990315114907.A406@ctcdist.com>
next in thread | raw e-mail | index | archive | help
Hi, Just UPGRADED from 2.2.8R (no patches) to 3.1R and the install went very clean (Nice Job!!) the only gotcha that I discovered that was not in the ERRATA was that after the upgrade X fails to start, complaining about unable to open a shared library: ld.so failed: Can't find shared library "libXpm.so.4.11" The file is in /usr/X11R6/lib which I think it where it belongs. This also happens with the GENERIC kernel and that was the only change I did (besides the upgrade) I also tried running ldconfig (I don't really understand what it does). Shame on me for upgrading my office machine first, but I cannot run X at present so any info would be appreciated. L8er & Thanks John --------------------------------------------------------------------------- | | John C. Place | Office 717-843-9964 | | placej@ctcdist.com | Systems Specialist | Fax 717-843-9597 | | | CTC Distribution Direct | Pager 800-605-8891 | --------------------------------------------------------------------------- | Those who don't know UNIX are doomed to re-invent it..... Poorly! | --------------------------------------------------------------------------- ==================================================================== This is the output of "startx 2> list" XFree86 Version 3.3.3.1 / X Window System (protocol Version 11, revision 0, vendor release 6300) Release Date: December 29 1998 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (see http://www.XFree86.Org/FAQ) Operating System: FreeBSD 3.0-CURRENT i386 [ELF] Configured drivers: SVGA: server for SVGA graphics adaptors (Patchlevel 0): NV1, STG2000, RIVA128, RIVATNT, ET4000, ET4000W32, ET4000W32i, ET4000W32i_rev_b, ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a, ET4000W32p_rev_b, ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100, et3000, pvga1, wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, ati, sis86c201, sis86c202, sis86c205, sis86c215, sis86c225, sis5597, sis5598, sis6326, tvga8200lx, tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000, tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420, tgui9420dgi, tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682, tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520, 3dimage975, 3dimage985, clgd5420, clgd5422, clgd5424, clgd5426, clgd5428, clgd5429, clgd5430, clgd5434, clgd5436, clgd5446, clgd5480, clgd5462, clgd5464, clgd5465, clgd6205, clgd6215, clgd6225, clgd6235, clgd7541, clgd7542, clgd7543, clgd7548, clgd7555, clgd7556, ncr77c22, ncr77c22e, cpq_avga, mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag200, mgag100, oti067, oti077, oti087, oti037c, al2101, ali2228, ali2301, ali2302, ali2308, ali2401, cl6410, cl6412, cl6420, cl6440, video7, ark1000vl, ark1000pv, ark2000pv, ark2000mt, mx, realtek, s3_virge, AP6422, AT24, AT3D, s3_svga, NM2070, NM2090, NM2093, NM2097, NM2160, NM2200, ct65520, ct65525, ct65530, ct65535, ct65540, ct65545, ct65546, ct65548, ct65550, ct65554, ct65555, ct68554, ct69000, ct64200, ct64300, mediagx, V1000, V2x00, p9100, spc8110, generic Using syscons driver with X support (version 2.0) (using VT number 4) XF86Config: /etc/XF86Config (**) stands for supplied, (--) stands for probed/default values (**) XKB: keycodes: "xfree86" (**) XKB: types: "default" (**) XKB: compat: "default" (**) XKB: symbols: "us(pc101)" (**) XKB: geometry: "pc" (**) XKB: rules: "xfree86" (**) XKB: model: "pc101" (**) XKB: layout: "us" (**) Mouse: type: Microsoft, device: /dev/mouse, baudrate: 1200 (**) Mouse: buttons: 3 (**) SVGA: Graphics device ID: "Primary Card" (**) SVGA: Monitor ID: "Primary Monitor" (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/75dpi" (--) SVGA: PCI: Tseng Labs ET4000W32P revD rev 0, Memory @ 0xe0000000 (--) SVGA: ET4000W32: Interleaved DRAM detected. (--) SVGA: Ramdac: ICS 5341 GenDAC and programmable clock (MClk = 50.11 MHz) (--) SVGA: Ramdac: ics5341 (--) SVGA: Detected W32p bus type (0x1c): PCI. (--) SVGA: ET4000: Initial hibit state: high (--) SVGA: chipset: ET4000W32p_rev_d (--) SVGA: videoram: 2048k (**) SVGA: Using 8 bpp, Depth 8, Color weight: 666 (--) SVGA: Maximum allowed dot-clock: 135.000 MHz (**) SVGA: Mode "1024x768": mode clock = 44.900 (**) SVGA: Mode "800x600": mode clock = 40.000 (**) SVGA: Mode "640x480": mode clock = 31.500 (**) SVGA: Mode "640x400": mode clock = 31.500 (**) SVGA: Mode "512x384": mode clock = 22.000 (**) SVGA: Mode "480x300": mode clock = 23.890 (**) SVGA: Mode "400x300": mode clock = 20.000 (**) SVGA: Mode "320x240": mode clock = 12.590 (**) SVGA: Mode "320x200": mode clock = 12.590 (--) SVGA: Virtual resolution set to 1024x768 (--) SVGA: Generic SpeedUps selected (Flags=0x30) (--) SVGA: ET4000W32p_rev_d: Using linear framebuffer at 0xE0000000. (--) SVGA: ET4000: SpeedUps selected (Flags=0x30) (--) SVGA: Using 3kb of unused display memory for extra acceleration functions. (--) SVGA: Using XAA (XFree86 Acceleration Architecture) (--) SVGA: XAA: Solid filled rectangles (--) SVGA: XAA: Screen-to-screen copy (--) SVGA: XAA: 8x8 pattern fill (--) SVGA: XAA: Using 8 128x128 areas for pixmap caching (--) SVGA: XAA: Caching tiles and non-transparent stipples (--) SVGA: XAA: General lines and segments ld.so failed: Can't find shared library "libXpm.so.4.11" To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19990315114907.A406>