Date: Wed, 20 Jun 2001 15:10:31 -0700 From: "Eric Parusel" <lists@globalrelay.net> To: <freebsd-stable@freebsd.org> Subject: Re: SMP/fxp problem... Message-ID: <03fa01c0f9d5$d25574e0$0600020a@frontend> References: <03b301c0f9d3$dbc37790$0600020a@frontend>
next in thread | previous in thread | raw e-mail | index | archive | help
Here's my full dmesg output:
> Hi,
>
> I've got about 11 systems with two Intel NIC's each,
> with varying 'versions' of FreeBSD 4.3-STABLE ....
> < Multiple lines deleted for sanity >
> Eric Parusel
> Systems Administrator
>
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
1994
The Regents of the University of California. All rights
reserved.
FreeBSD 4.3-STABLE #1: Wed Jun 6 12:42:45 PDT 2001
root@a.globalrelay.com:/usr/obj/usr/src/sys/CUSTOMSMP
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (549.06-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x673 Stepping = 3
Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG
E,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory = 805306368 (786432K bytes)
config> di ppc0
config> di sn0
No such device: sn0
Invalid command or syntax. Type `?' for help.
config> di lnc0
No such device: lnc0
Invalid command or syntax. Type `?' for help.
config> di ie0
No such device: ie0
Invalid command or syntax. Type `?' for help.
config> di fe0
No such device: fe0
Invalid command or syntax. Type `?' for help.
config> di ed0
No such device: ed0
Invalid command or syntax. Type `?' for help.
config> di cs0
No such device: cs0
Invalid command or syntax. Type `?' for help.
config> di bt0
config> di aic0
config> di aha0
config> di adv0
config> q
avail memory = 778588160 (760340K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc03da000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc03da09c.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> on
motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371AB PCI to ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfcd0-0xfcdf at device
4.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 4.2
Timecounter "PIIX" frequency 3579545 Hz
chip1: <Intel 82371AB Power management controller> port 0x2180-0x218f
at device 4.3 on pci0
pcib1: <PCI to PCI bridge (vendor=8086 device=0960)> at device 7.0 on
pci0
pci1: <PCI bus> on pcib1
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xecc0-0xecff mem
0xfea00000-0xfeafffff,0xfebfe000-0xfebfefff irq 10 at device 4.0 on
pci1
fxp0: Ethernet address 00:d0:b7:9d:e0:15
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sym0: <895> port 0xe800-0xe8ff mem
0xfebfd000-0xfebfdfff,0xfebff800-0xfebff8ff irq 11 at device 7.0 on
pci1
sym0: Symbios NVRAM, ID 7, Fast-40, LVD, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
amr0: <AMI MegaRAID> mem 0xe0000000-0xe7ffffff irq 9 at device 7.1 on
pci0
amr0: <Integrated HP NetRAID (T5)> Firmware \^C\^CD , BIOS \^C\^BB ,
16MB RAM
pcib2: <DEC 21152 PCI-PCI bridge> at device 8.0 on pci0
pci2: <PCI bus> on pcib2
fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0xdcc0-0xdcff mem
0xfe800000-0xfe8fffff,0xefffe000-0xefffefff irq 12 at device 2.0 on
pci2
fxp1: Ethernet address 00:d0:b7:e0:3d:64
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <unknown card> (vendor=0x103c, dev=0x10c1) at 11.0
pci0: <Cirrus Logic GD5446 SVGA controller> at 13.0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: unable to allocate the IRQ resource (12).
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0
intpin 2
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
SMP: AP CPU #1 Launched!
acd0: CDROM <HITACHI CDR-8435> at ata0-master using PIO4
Waiting 15 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
amrd0: <MegaRAID logical drive> on amr0
amrd0: 70006MB (143372288 sectors) RAID 1 (optimal)
no devsw (majdev=0 bootdev=0xa0200000)
Mounting root from ufs:/dev/amrd0s1a
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?03fa01c0f9d5$d25574e0$0600020a>