Date: Wed, 19 Aug 2015 14:07:57 +0200 From: Gerhard Schmidt <estartu@ze.tum.de> To: FreeBSD stable <freebsd-stable@freebsd.org> Subject: Installing FreeBSD on MacPro Message-ID: <55D4719D.60709@ze.tum.de>
next in thread | raw e-mail | index | archive | help
Hi,
I'm trying to install FreeBSD 10.2 on a MacPro.
Installing and Booting works. But a few seconds after login and accessing the Harddisk, I'm getting the following errors.
ahcich0: Timeout on slot 13 port 0
ahcich0: is 00000008 cs 00000000 ss 00000000 rs ffffffff tfd 40 serr 00000000 cmd 0000cd17
(ada0:ahcich0:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 00 28 15 40 40 2f 00 00 01 00 00
(ada0:ahcich0:0:0:0): CAM status: Command timeout
(ada0:ahcich0:0:0:0): Retrying command
ahcich0: Timeout on slot 15 port 0
ahcich0: is 00000008 cs 00000000 ss 00000000 rs ffffffff tfd 40 serr 00000000 cmd 0000cf17
(ada0:ahcich0:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 08 a0 5f bd 40 13 00 00 00 00 00
(ada0:ahcich0:0:0:0): CAM status: Command timeout
(ada0:ahcich0:0:0:0): Retrying command
ahcich0: Timeout on slot 2 port 0
ahcich0: is 00000008 cs 00000000 ss 00000000 rs ffffffff tfd 40 serr 00000000 cmd 0000c217
(ada0:ahcich0:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 08 c0 23 bd 40 13 00 00 00 00 00
(ada0:ahcich0:0:0:0): CAM status: Command timeout
(ada0:ahcich0:0:0:0): Retrying command
Any Ideas what causes this and what can be done to fix it.
the dmesg of the MacPro is the following
Copyright (c) 1992-2015 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.2-RELEASE #0 r286666: Wed Aug 12 15:26:37 UTC 2015
root@releng1.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
VT: running with driver "efifb".
CPU: Intel(R) Xeon(R) CPU E5-2697 v2 @ 2.70GHz (2700.06-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x306e4 Family=0x6 Model=0x3e Stepping=4
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7fbee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x1<LAHF>
Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
TSC: P-state invariant, performance statistics
real memory = 68719476736 (65536 MB)
avail memory = 66655334400 (63567 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <APPLE Apple00>
FreeBSD/SMP: Multiprocessor System Detected: 24 CPUs
FreeBSD/SMP: 1 package(s) x 12 core(s) x 2 SMT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
cpu8 (AP): APIC ID: 8
cpu9 (AP): APIC ID: 9
cpu10 (AP): APIC ID: 10
cpu11 (AP): APIC ID: 11
cpu12 (AP): APIC ID: 16
cpu13 (AP): APIC ID: 17
cpu14 (AP): APIC ID: 18
cpu15 (AP): APIC ID: 19
cpu16 (AP): APIC ID: 20
cpu17 (AP): APIC ID: 21
cpu18 (AP): APIC ID: 22
cpu19 (AP): APIC ID: 23
cpu20 (AP): APIC ID: 24
cpu21 (AP): APIC ID: 25
cpu22 (AP): APIC ID: 26
cpu23 (AP): APIC ID: 27
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
lapic0: Forcing LINT1 to edge trigger
random: <Software, Yarrow> initialized
module_register_init: MOD_LOAD (vesa, 0xffffffff80db8eb0, 0) error 19
kbd0 at kbdmux0
acpi0: <APPLE Apple00> on motherboard
acpi0: Power Button (fixed)
unknown: I/O range not supported
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 340
Event timer "HPET2" frequency 14318180 Hz quality 340
Event timer "HPET3" frequency 14318180 Hz quality 340
Event timer "HPET4" frequency 14318180 Hz quality 340
Event timer "HPET5" frequency 14318180 Hz quality 340
Event timer "HPET6" frequency 14318180 Hz quality 340
Event timer "HPET7" frequency 14318180 Hz quality 340
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
cpu8: <ACPI CPU> on acpi0
cpu9: <ACPI CPU> on acpi0
cpu10: <ACPI CPU> on acpi0
cpu11: <ACPI CPU> on acpi0
cpu12: <ACPI CPU> on acpi0
cpu13: <ACPI CPU> on acpi0
cpu14: <ACPI CPU> on acpi0
cpu15: <ACPI CPU> on acpi0
cpu16: <ACPI CPU> on acpi0
cpu17: <ACPI CPU> on acpi0
cpu18: <ACPI CPU> on acpi0
cpu19: <ACPI CPU> on acpi0
cpu20: <ACPI CPU> on acpi0
cpu21: <ACPI CPU> on acpi0
cpu22: <ACPI CPU> on acpi0
cpu23: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci16: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> mem 0xbf900000-0xbf93ffff at device 0.0 on pci16
pci17: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 1.0 on pci17
pci18: <ACPI PCI bus> on pcib3
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xa0900000-0xa090ffff,0xa0910000-0xa0910fff,0xa0911000-0xa0911fff at
device 0.0 on pci18
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
pcib4: <ACPI PCI-PCI bridge> at device 2.0 on pci17
pci20: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 8.0 on pci17
pci19: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 9.0 on pci17
pci91: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 10.0 on pci17
pci162: <ACPI PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci2: <ACPI PCI bus> on pcib8
vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem 0x80000000-0x8fffffff,0xa0700000-0xa073ffff at device 0.0 on pci2
hdac0: <ATI R1000 HDA Controller> mem 0xa0760000-0xa0763fff at device 0.1 on pci2
hdac0: hdac_get_capabilities: Invalid corb size (0)
device_attach: hdac0 attach returned 6
pcib9: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci6: <ACPI PCI bus> on pcib9
vgapci1: <VGA-compatible display> port 0x2000-0x20ff mem 0x90000000-0x9fffffff,0xa0600000-0xa063ffff at device 0.0 on pci6
hdac0: <ATI R1000 HDA Controller> mem 0xa0660000-0xa0663fff at device 0.1 on pci6
hdac0: hdac_get_capabilities: Invalid corb size (0)
device_attach: hdac0 attach returned 6
pcib10: <ACPI PCI-PCI bridge> at device 17.0 on pci0
pci10: <ACPI PCI bus> on pcib10
pci0: <simple comms> at device 22.0 (no driver attached)
hdac0: <Intel Patsburg HDA Controller> mem 0xa0820000-0xa0823fff at device 27.0 on pci0
pcib11: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci11: <ACPI PCI bus> on pcib11
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x57766000> mem
0xa0300000-0xa030ffff,0xa0310000-0xa031ffff at device 0.0 on pci11
bge0: CHIP ID 0x57766000; ASIC REV 0x57766; CHIP REV 0x577660; PCI-E
miibus0: <MII bus> on bge0
brgphy0: <BCM57765 1000BASE-T media interface> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX,
1000baseT-FDX-master, auto, auto-flow
bge0: Using defaults for TSO: 65518/35/2048
bge0: Ethernet address: 00:3e:e1:c2:1a:e3
pcib12: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pci12: <ACPI PCI bus> on pcib12
bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x57766000> mem
0xa0400000-0xa040ffff,0xa0410000-0xa041ffff at device 0.0 on pci12
bge1: CHIP ID 0x57766000; ASIC REV 0x57766; CHIP REV 0x577660; PCI-E
miibus1: <MII bus> on bge1
brgphy1: <BCM57765 1000BASE-T media interface> PHY 1 on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX,
1000baseT-FDX-master, auto, auto-flow
bge1: Using defaults for TSO: 65518/35/2048
bge1: Ethernet address: 00:3e:e1:c2:1a:e2
pcib13: <ACPI PCI-PCI bridge> at device 28.2 on pci0
pci13: <ACPI PCI bus> on pcib13
pci13: <network> at device 0.0 (no driver attached)
pcib14: <ACPI PCI-PCI bridge> at device 28.4 on pci0
pci14: <ACPI PCI bus> on pcib14
ahci0: <AHCI SATA controller> mem 0xa0500000-0xa0501fff at device 0.0 on pci14
ahci0: AHCI v1.30 with 1 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ehci0: <Intel Patsburg USB 2.0 controller> mem 0xa0827800-0xa0827bff at device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
pcib15: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci15: <ACPI PCI bus> on pcib15
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
ppc0: cannot reserve I/O port range
uart0: <8250 or 16450 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
est8: <Enhanced SpeedStep Frequency Control> on cpu8
est9: <Enhanced SpeedStep Frequency Control> on cpu9
est10: <Enhanced SpeedStep Frequency Control> on cpu10
est11: <Enhanced SpeedStep Frequency Control> on cpu11
est12: <Enhanced SpeedStep Frequency Control> on cpu12
est13: <Enhanced SpeedStep Frequency Control> on cpu13
est14: <Enhanced SpeedStep Frequency Control> on cpu14
est15: <Enhanced SpeedStep Frequency Control> on cpu15
est16: <Enhanced SpeedStep Frequency Control> on cpu16
est17: <Enhanced SpeedStep Frequency Control> on cpu17
est18: <Enhanced SpeedStep Frequency Control> on cpu18
est19: <Enhanced SpeedStep Frequency Control> on cpu19
est20: <Enhanced SpeedStep Frequency Control> on cpu20
est21: <Enhanced SpeedStep Frequency Control> on cpu21
est22: <Enhanced SpeedStep Frequency Control> on cpu22
est23: <Enhanced SpeedStep Frequency Control> on cpu23
random: unblocking device.
usbus0: 5.0Gbps Super Speed USB v3.0
Timecounters tick every 1.000 msec
hdacc0: <Cirrus Logic (0x4208) HDA CODEC> at cad 0 on hdac0
hdaa0: <Cirrus Logic (0x4208) Audio Function Group> at nid 1 on hdacc0
pcm0: <Cirrus Logic (0x4208) (Analog)> at nid 18 and 24 on hdaa0
pcm1: <Cirrus Logic (0x4208) (Analog Headphones)> at nid 16 on hdaa0
pcm2: <Cirrus Logic (0x4208) (Analog Line-out)> at nid 19 on hdaa0
pcm3: <Cirrus Logic (0x4208) (Digital)> at nid 33 on hdaa0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <0x1b73> at usbus0
uhub0: <0x1b73 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <APPLE SSD SM1024F UXM8JA1Q> ATA8-ACS SATA 3.x device
ada0: Serial Number S1FVNYAF903719
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 954204MB (1954210120 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
lapic1: Forcing LINT1 to edge trigger
SMP: AP CPU #1 Launched!
lapic6: Forcing LINT1 to edge trigger
SMP: AP CPU #6 Launched!
lapic7: Forcing LINT1 to edge trigger
SMP: AP CPU #7 Launched!
lapic3: Forcing LINT1 to edge trigger
SMP: AP CPU #3 Launched!
lapic19: Forcing LINT1 to edge trigger
SMP: AP CPU #15 Launched!
lapic22: Forcing LINT1 to edge trigger
SMP: AP CPU #18 Launched!
lapic26: Forcing LINT1 to edge trigger
SMP: AP CPU #22 Launched!
lapic23: Forcing LINT1 to edge trigger
SMP: AP CPU #19 Launched!
lapic9: Forcing LINT1 to edge trigger
SMP: AP CPU #9 Launched!
lapic27: Forcing LINT1 to edge trigger
SMP: AP CPU #23 Launched!
lapic24: Forcing LINT1 to edge trigger
SMP: AP CPU #20 Launched!
lapic25: Forcing LINT1 to edge trigger
SMP: AP CPU #21 Launched!
lapic10: Forcing LINT1 to edge trigger
SMP: AP CPU #10 Launched!
lapic4: Forcing LINT1 to edge trigger
SMP: AP CPU #4 Launched!
lapic5: Forcing LINT1 to edge trigger
SMP: AP CPU #5 Launched!
lapic18: Forcing LINT1 to edge trigger
SMP: AP CPU #14 Launched!
lapic8: Forcing LINT1 to edge trigger
SMP: AP CPU #8 Launched!
lapic11: Forcing LINT1 to edge trigger
SMP: AP CPU #11 Launched!
lapic17: Forcing LINT1 to edge trigger
SMP: AP CPU #13 Launched!
lapic2: Forcing LINT1 to edge trigger
SMP: AP CPU #2 Launched!
lapic16: Forcing LINT1 to edge trigger
SMP: AP CPU #12 Launched!
lapic21: Forcing LINT1 to edge trigger
SMP: AP CPU #17 Launched!
lapic20: Forcing LINT1 to edge trigger
SMP: AP CPU #16 Launched!
Timecounter "TSC-low" frequency 1350029784 Hz quality 1000
Root mount waiting for: usbus1 usbus0
uhub0: 8 ports with 8 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ugen0.2: <Logitech> at usbus0
Root mount waiting for: usbus1 usbus0
ugen1.2: <vendor 0x8087> at usbus1
uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
ugen0.3: <vendor 0x05ac> at usbus0
uhub3: <vendor 0x05ac product 0x1008, class 9/0, rev 2.00/0.01, addr 2> on usbus0
uhub3: 1 port with 1 removable, bus powered
Root mount waiting for: usbus1 usbus0
ugen0.4: <vendor 0x05ac> at usbus0
uhub4: <vendor 0x05ac product 0x9132, class 9/0, rev 2.00/1.01, addr 3> on usbus0
uhub4: MTT enabled
uhub2: 8 ports with 7 removable, self powered
uhub4: 3 ports with 2 removable, self powered
Root mount waiting for: usbus1 usbus0
ugen1.3: <Apple Inc.> at usbus1
uhub5: <Apple Inc. BRCM20702 Hub, class 9/0, rev 2.00/1.00, addr 3> on usbus1
ugen0.5: <vendor 0x05ac> at usbus0
hid_get_item: Number of items truncated to 255
uhub5: 3 ports with 0 removable, self powered
Root mount waiting for: usbus1 usbus0
ugen1.4: <vendor 0x05ac> at usbus1
ukbd0: <vendor 0x05ac product 0x820a, class 0/0, rev 2.00/1.00, addr 4> on usbus1
kbd1 at ukbd0
ugen0.6: <Apple, Inc.> at usbus0
uhub6: <Apple, Inc. Keyboard Hub, class 9/0, rev 2.00/96.15, addr 5> on usbus0
uhub6: 3 ports with 2 removable, bus powered
ugen1.5: <vendor 0x05ac> at usbus1
Root mount waiting for: usbus1 usbus0
ugen0.7: <Apple, Inc> at usbus0
ukbd1: <Apple, Inc Apple Keyboard, class 0/0, rev 2.00/0.69, addr 6> on usbus0
kbd2 at ukbd1
ugen1.6: <Apple Inc.> at usbus1
Trying to mount root from ufs:/dev/ada0p2 [rw]...
ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/72.00, addr 1> on usbus0
ums1: <vendor 0x05ac product 0x820b, class 0/0, rev 2.00/1.00, addr 5> on usbus1
ums1: 3 buttons and [XY] coordinates ID=2
ums0: 3 buttons and [XYZ] coordinates ID=0
hid_get_item: Number of items truncated to 255
hid_get_item: Number of items truncated to 255
uhid0: <vendor 0x05ac product 0x9232, class 0/0, rev 1.10/1.14, addr 4> on usbus0
hid_get_item: Number of items truncated to 255
hid_get_item: Number of items truncated to 255
hid_get_item: Number of items truncated to 255
uhid1: <Apple, Inc Apple Keyboard, class 0/0, rev 2.00/0.69, addr 6> on usbus0
ubt0: <Apple Inc. Bluetooth USB Host Controller, rev 2.00/1.06, addr 6> on usbus1
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
WARNING: attempt to domain_add(netgraph) after domainfinalize()
ng_hci_send_command: ubt0hci - could not send HCI command, error=12
ng_hci_process_command_timeout: ubt0hci - unable to complete HCI command OGF=0x3, OCF=0x3. Timeout
Regards
Estartu
--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?55D4719D.60709>