Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 03 Feb 1999 22:52:40 +0300
From:      Alex Povolotsky <tarkhil@asteroid.svib.ru>
To:        stable@FreeBSD.ORG
Subject:   Kernel panics on 3.0-RELEASE
Message-ID:  <199902031952.WAA01255@shuttle.svib.ru>

next in thread | raw e-mail | index | archive | help

[-- Attachment #1 --]
Hello!

I've got 100% repeatable panic using 3.0-RELEASE.

I have wd0 and wd3 on their usual place (dmesg output included), and every 
kernel I've made (actually, two; the second is cut-down GENERIC) panics after 
most of local daemons been started, or (in single-user mode) on attempt to 

ls /usr/lib

panic: vrele: negative ref count.

What have I done wrong?



[-- Attachment #2 --]
#	$Id: GENERIC,v 1.125 1998/10/16 01:30:11 obrien Exp $

machine		"i386"
cpu		"I586_CPU"
ident		SHUTTLE
maxusers	32

options		INET			#InterNETworking
options		FFS			#Berkeley Fast Filesystem
options		FFS_ROOT		#FFS usable as root device [keep this!]
options		MSDOSFS			#MSDOS Filesystem
options		"CD9660"		#ISO 9660 Filesystem
options		PROCFS			#Process filesystem
options		"COMPAT_43"		#Compatible with BSD 4.3 [KEEP THIS!]
options		UCONSOLE		#Allow users to grab the console
options		USERCONFIG		#boot -c editor
options		VISUAL_USERCONFIG	#visual boot -c editor

config		kernel	root on wd0

controller	isa0
controller	pci0

controller	fdc0	at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr
disk		fd0	at fdc0 drive 0

options		"CMD640"	# work around CMD640 chip deficiency
controller	wdc0	at isa? port "IO_WD1" bio irq 14 flags 0xA0FFA0FF vector wdintr
disk		wd0	at wdc0 drive 0
#disk		wd1	at wdc0 drive 1

controller	wdc1	at isa? port "IO_WD2" bio irq 15 flags 0xA0FFA0FF vector wdintr
#disk		wd2	at wdc1 drive 0
disk		wd3	at wdc1 drive 1

options		ATAPI		#Enable ATAPI support for IDE bus
options		ATAPI_STATIC	#Don't do it as an LKM
device		acd0		#IDE CD-ROM

device		wt0	at isa? port 0x300 bio irq 9 drq 1 vector wtintr

device		sc0	at isa? port "IO_KBD" conflicts tty irq 1 vector scintr

device		npx0	at isa? port "IO_NPX" irq 13 vector npxintr

device		sio0	at isa? port "IO_COM1" flags 0x10 tty irq 4 vector siointr
device		sio1	at isa? port "IO_COM2" tty irq 3 vector siointr

device		lpt0	at isa? port? tty irq 7 vector lptintr

device		psm0	at isa? port "IO_KBD" conflicts tty irq 12 vector psmintr

pseudo-device	loop
pseudo-device	ether
pseudo-device	ppp	1
pseudo-device	tun	1
pseudo-device	pty	16
pseudo-device	gzip		# Exec gzipped a.out's

options		KTRACE		#kernel tracing

options		SYSVSHM

pseudo-device	bpfilter	4	#Berkeley packet filter

[-- Attachment #3 --]
Copyright (c) 1992-1998 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California. All rights reserved.
FreeBSD 3.0-RELEASE #2: Tue Feb  2 18:50:43 MSK 1999
    root@:/usr/src/sys/compile/MTKERNEL
Timecounter "i8254"  frequency 1193182 Hz  cost 3368 ns
Timecounter "TSC"  frequency 300683792 Hz  cost 91 ns
CPU: AMD-K6(tm) 3D processor (300.68-MHz 586-class CPU)
  Origin = "AuthenticAMD"  Id = 0x584  Stepping=4
  Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory  = 67108864 (65536K bytes)
avail memory = 63029248 (61552K bytes)
DEVFS: ready for devices
Probing for devices on PCI bus 0:
chip0: <VIA 82C597 (Apollo VP3) system controller> rev 0x04 on pci0.0.0
chip1: <PCI to PCI bridge (vendor=1106 device=8598)> rev 0x00 on pci0.1.0
chip2: <VIA 82C586 PCI-ISA bridge> rev 0x41 on pci0.7.0
ide_pci0: <VIA 82C586x (Apollo) Bus-master IDE controller> rev 0x06 on pci0.7.1
chip3: <VIA 82C586B ACPI interface> rev 0x10 on pci0.7.3
vga0: <S3 ViRGE DX/GX graphics accelerator> rev 0x01 int a irq 11 on pci0.9.0
bktr0: <BrookTree 848> rev 0x12 int a irq 10 on pci0.10.0
AVer Media TV/FM, Temic SECAM tuner.
Probing for devices on PCI bus 1:
Probing for PnP devices:
CSN 1 Vendor ID: CTL0035 [0x35008c0e] Serial 0x00004c0a Comp ID: @@@0000 [0x00000000]
pcm1 (SB16pnp <SB16 PnP> sn 0x00004c0a) at 0x220-0x22f irq 5 drq 3 flags 0x15 on isa
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
psm0 at 0x60-0x64 irq 12 on motherboard
psm0: model Generic PS/2 mouse, device ID 0
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
pca0 on motherboard
pca0: PC speaker audio driver
wdc0 at 0x1f0-0x1f7 irq 14 flags 0xa0ffa0ff on isa
wdc0: unit 0 (wd0): <ST31722A>, DMA, 32-bit, multi-block-16
wd0: 1625MB (3329424 sectors), 3303 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 at 0x170-0x177 irq 15 flags 0xa0ffa0ff on isa
wdc1: unit 1 (wd1): <QUANTUM FIREBALL EL5.1A>, DMA, 32-bit, multi-block-16
wd3: 4892MB (10018890 sectors), 10602 cyls, 15 heads, 63 S/T, 512 B/S
wdc1: unit 0 (atapi): <FX820S/g01>, removable, intr, dma, iordis
acd0: drive speed 1377Kb/sec, 256Kb cache
acd0: supported read  types: CD-DA
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: CD-ROM 120mm data disc loaded, unlocked
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wt0 at 0x300-0x303 irq 9 drq 1 on isa
wt0: type <Archive>
npx0 on motherboard
npx0: INT 16 interface
pcm0 not found
DEVFS: ready to run
changing root device to wd0s2a

[-- Attachment #4 --]
Alexander B. Povolotsky                            [ICQ 18277558]
[2:5020/145]  [http://freebsd.svib.ru] [tarkhil@asteroid.svib.ru]
[Urgent messages: 234-9696 ΑΒ.#35442 or tarkhil@pager.express.ru] 

Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199902031952.WAA01255>