Date: Wed, 5 Aug 1998 14:46:39 +0200 From: Andreas Klemm <aklemm@hightek.com> To: Andreas Klemm <aklemm@hightek.com>, hardware@FreeBSD.ORG Subject: Re: is 3COM 3C905B-TX supported under 2.2.6-STABLE or 2.2.7-STABLE ? Message-ID: <19980805144639.25256@hightek.com> In-Reply-To: <19980805132803.06625@hightek.com>; from Andreas Klemm on Wed, Aug 05, 1998 at 01:28:03PM %2B0200 References: <19980805131342.03721@hightek.com> <19980805132803.06625@hightek.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Tried to fix it in /usr/src/sys/pci/if_vx_pci.c
by hacking in support for this card:
--- if_vx_pci.c.orig Wed Aug 5 14:44:38 1998
+++ if_vx_pci.c Wed Aug 5 14:45:00 1998
@@ -84,6 +84,8 @@
return "3COM 3C900 Etherlink XL PCI";
if(device_id == 0x905010b7ul || device_id == 0x905110b7ul)
return "3COM 3C905 Fast Etherlink XL PCI";
+ if(device_id == 0x905510b7ul)
+ return "3COM 3C905B Fast Etherlink TX PCI";
return NULL;
}
Though the vx driver now has been assigned to this card,
the machine now hangs at boottime. If I go into single user
mode and type in the ifconfig command manualle, then the
kernel spits out
out of mbuf clusters - increase maxusers
Well, actually this was a custom kernel with maxusers already
set to 256.
On Wed, Aug 05, 1998 at 01:28:03PM +0200, Andreas Klemm wrote:
> Additional info: the 2.2.6 system tells the following during boot:
>
> pci0:15: vendor=0x10b7, device=0x9055, class=network (ethernet) int a irq 12
> [no driver assigned]
>
> On Wed, Aug 05, 1998 at 01:13:42PM +0200, Andreas Klemm wrote:
> > When installing a 2.2.6 machine from CD-ROM the
> > 3COM 3C905B-TX 10/100 PCI card isn't detected.
> >
> > The chipset is:
> > Parallel Tasking II
> > Performance
> > 3Com 40-0502-001
> > 9805S 10727438
> > LUCENT 40-05021
> >
> > The card:
> > FAB 02-0152-000 Rev 03
> >
> > Please help, currently installing ;-)
> >
> > --
> > B&K Gruppe - Wuppertal <aklemm@hightek.com>
> > phone +49 202 7399 - 170 <andreas@FreeBSD.ORG>
> > fax +49 202 7399 - 100 http://www.FreeBSD.ORG/~andreas/
> >
> > To Unsubscribe: send mail to majordomo@FreeBSD.org
> > with "unsubscribe freebsd-hardware" in the body of the message
>
> --
> B&K Gruppe - Wuppertal <aklemm@hightek.com>
> phone +49 202 7399 - 170 <andreas@FreeBSD.ORG>
> fax +49 202 7399 - 100 http://www.FreeBSD.ORG/~andreas/
--
B&K Gruppe - Wuppertal <aklemm@hightek.com>
phone +49 202 7399 - 170 <andreas@FreeBSD.ORG>
fax +49 202 7399 - 100 http://www.FreeBSD.ORG/~andreas/
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hardware" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19980805144639.25256>