Date: Thu, 1 Mar 2001 22:26:26 -0600 From: Bruce Burden <brucegb@realtime.net> To: freebsd-hardware@freebsd.org Subject: pointers for config flash mem card, please Message-ID: <20010301222626.A4951@tigerfish2.my.domain>
next in thread | raw e-mail | index | archive | help
Hi gang,
I have a Calluna flash memory card I am attempting to get
configured, and could use some help.
First, the hardware:
pcic-pci0: <Ricoh RL5C476 PCI-CardBus Bridge> mem 0xd3401000-0xd3401fff irq 19 at device 9.0 on pci0
pcic-pci1: <Ricoh RL5C476 PCI-CardBus Bridge> mem 0xd3402000-0xd3402fff irq 16 at device 9.1 on pci0
When I inset the card, this happens:
/kernel: pccard: card inserted, slot 1
pccardd[58]: Card "Calluna"("CT130MC") [01Feb96] ['302-24 ] has
function ID 4
pccardd[58]: Card "Calluna"("CT130MC") [01Feb96] ['302-24 ] has
function ID 4
/kernel: sio0: 3 more silo overflows (total 3)
/kernel: sio0: 3 more silo overflows (total 3)
/kernel: ata4 at port 0x280-0x28f irq 10 slot 1 on pccard1
/kernel: ata4 at port 0x280-0x28f irq 10 slot 1 on pccard1
/kernel: ata4-master: ata_command: timeout waiting for intr
/kernel: ata4-master: ata_command: timeout waiting for intr
/kernel: ata4-master: identify failed
/kernel: ata4-master: identify failed
pccardd[58]: ata4: GENERIC Flash ATA / ATA HDD inserted.
pccardd[58]: ata4: GENERIC Flash ATA / ATA HDD inserted.
/kernel: ata4: detached
/kernel: ata4: detached
To get this far, I modified the "wildcard" flash memory card
as described by Greg Lehey on 28 Nov. 2000 on the -questions and
-hardware mailing lists. Clearly, however, something didn't quite
work. I suspect that the sio0 overflows means that an IRQ is being
shared (irq 8), and somebody isn't happy (FWIW, inserting the card
in slot 0 will cause i/o to hang until the card is removed). However,
I don't see anybody reported at irq 8 with 'dmesg'.
I haven't worked with ATA worth mention in the past, so I am
not sure how to proceed.
If it matters, this card is from an Agfa ActionCam (Minolta
RD-175 digital camera) with a stated capacity of 130MB.
Thank you,
Bruce
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hardware" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010301222626.A4951>