Date: Wed, 3 Jul 2002 11:36:59 +0200 From: Erwin Lansing <erwin@lansing.dk> To: freebsd-stable@freebsd.org Subject: Asus A7V266-E Promise RAID Message-ID: <20020703113659.B22250@droso.net>
next in thread | raw e-mail | index | archive | help
--uXxzq0nDebZQVNAZ Content-Type: multipart/mixed; boundary="24zk1gE8NUlDmwG9" Content-Disposition: inline --24zk1gE8NUlDmwG9 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable After the big ata merge, our Promise ATA RAID stopped working with a device 'ar' not found. It seems the chipset is not fully recognised. It's ASUS A7V266-E mobo with VIA VT8233 chipset. As said, it works finde with 4.5-RELEASE (and -STABLE before the ata merge). Verbose boot of 4.6-RELEASE and normal boot of 4.5-RELEASE attached. Any hints appreciated. /erwin --=20 Erwin Lansing -- http://droso.org --24zk1gE8NUlDmwG9 Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="valhalla-vboot.txt" Content-Transfer-Encoding: quoted-printable ? panic: Root mount failed, startup aborted. syncing disks...=20 done Uptime: 33s Automatic reboot in 15 seconds - press a key on the console to abort Rebooting... /=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08Console: serial= port BIOS drive C: is disk0 BIOS drive D: is disk1 BIOS drive E: is disk2 BIOS drive F: is disk3 BIOS drive G: is disk4 BIOS 630kB/129968kB available memory FreeBSD/i386 bootstrap loader, Revision 0.8 (root@prison.pil.dk, Thu Jun 27 10:52:18 CEST 2002) |=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-= =08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08= /=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\= =08|=08/=08-=08Loading /boot/defaults/loader.conf=20 \=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/= =08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08= |=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-= =08\=08/kernel text=3D0x1a4d61 |=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08= \=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/= =08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08= |=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-= =08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08= /=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\= =08|=08/=08data=3D0x23bc0+0x1deb4 -=08\=08|=08/=08-=08\=08|=08/=08-=08\=08s= yms=3D[0x4+0x28690|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08+0x4+0x2e9f4-=08\= =08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08] -=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|= =08/=08-=08\=08|=08/=08-=08\=08|=08/=08 Hit [Enter] to boot immediately, or any other key for command prompt. Booting [kernel] in 9 seconds... Booting [kernel] in 8 seconds... Booting [= kernel] in 7 seconds... Booting [kernel] in 6 seconds... Booting [kernel] i= n 5 seconds... Booting [kernel] in 4 seconds... Booting [kernel] in 3 secon= ds... Booting [kernel] in 2 seconds... Booting [kernel] in 1 second...=20 Type '?' for a list of commands, 'help' for more detailed help. ok boot -v -=08\=08|=08/=08-=08\=08|=08SMAP type=3D01 base=3D00000000 00000000 len=3D0= 0000000 0009d800 SMAP type=3D02 base=3D00000000 0009d800 len=3D00000000 00002800 SMAP type=3D02 base=3D00000000 000f0000 len=3D00000000 00010000 SMAP type=3D01 base=3D00000000 00100000 len=3D00000000 07eec000 SMAP type=3D03 base=3D00000000 07fec000 len=3D00000000 00003000 SMAP type=3D02 base=3D00000000 07fef000 len=3D00000000 00010000 SMAP type=3D04 base=3D00000000 07fff000 len=3D00000000 00001000 SMAP type=3D02 base=3D00000000 ffff0000 len=3D00000000 00010000 Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.6-RELEASE-p1 #7: Wed Jul 3 09:56:52 CEST 2002 root@prison.pil.dk:/usr/obj/usr/src/sys/VALHALLA Calibrating clock(s) ... TSC clock: 1333386235 Hz, i8254 clock: 1193187 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method Timecounter "TSC" frequency 1333388753 Hz CPU: AMD Athlon(TM)Processor (1333.39-MHz 686-class CPU) Origin =3D "AuthenticAMD" Id =3D 0x642 Stepping =3D 2 Features=3D0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,= CMOV,PAT,PSE36,MMX,FXSR> AMD Features=3D0xc0440000<<b18>,AMIE,DSP,3DNow!> Data TLB: 24 entries, fully associative Instruction TLB: 16 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associat= ive L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative real memory =3D 134135808 (130992K bytes) Physical memory chunk(s): 0x00001000 - 0x0009cfff, 638976 bytes (156 pages) 0x00367000 - 0x07fe3fff, 130535424 bytes (31869 pages) avail memory =3D 127217664 (124236K bytes) bios32: Found BIOS32 Service Directory header at 0xc00f1470 bios32: Entry =3D 0xf0bf0 (c00f0bf0) Rev =3D 0 Len =3D 1 pcibios: PCI BIOS entry at 0xdf0 pnpbios: Found PnP BIOS data at 0xc00fbd70 pnpbios: Entry =3D f0000:bda0 Rev =3D 1.0 pnpbios: OEM ID cd041 Other BIOS signatures found: ACPI: 000f6cc0 Preloaded elf kernel "kernel" at 0xc0340000. Pentium Pro MTRR support enabled pci_open(1): mode 1 addr port (0x0cf8) is 0x80000060 pci_open(1a): mode1res=3D0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=3D060000] [hdr=3D00] is there (id=3D30991106) Using $PIR table, 10 entries at 0xc00f13a0 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard found-> vendor=3D0x1106, dev=3D0x3099, revid=3D0x00 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0 subordinatebus=3D0 secondarybus=3D0 map[10]: type 1, range 32, base fc000000, size 25 found-> vendor=3D0x1106, dev=3D0xb099, revid=3D0x00 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 subordinatebus=3D1 secondarybus=3D1 found-> vendor=3D0x13f6, dev=3D0x0111, revid=3D0x10 class=3D04-01-00, hdrtype=3D0x00, mfdev=3D0 subordinatebus=3D0 secondarybus=3D0 intpin=3Da, irq=3D11 map[10]: type 1, range 32, base 0000d800, size 8 found-> vendor=3D0x105a, dev=3D0x0d30, revid=3D0x02 class=3D01-04-00, hdrtype=3D0x00, mfdev=3D0 subordinatebus=3D0 secondarybus=3D0 intpin=3Da, irq=3D12 map[10]: type 1, range 32, base 0000d400, size 3 map[14]: type 1, range 32, base 0000d000, size 2 map[18]: type 1, range 32, base 0000b800, size 3 map[1c]: type 1, range 32, base 0000b400, size 2 map[20]: type 1, range 32, base 0000b000, size 6 map[24]: type 1, range 32, base ef000000, size 17 found-> vendor=3D0x10de, dev=3D0x0110, revid=3D0xb2 class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0 subordinatebus=3D0 secondarybus=3D0 intpin=3Da, irq=3D12 map[10]: type 1, range 32, base ee000000, size 24 map[14]: type 1, range 32, base f0000000, size 27 found-> vendor=3D0x10b7, dev=3D0x9200, revid=3D0x78 class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0 subordinatebus=3D0 secondarybus=3D0 intpin=3Da, irq=3D11 map[10]: type 1, range 32, base 0000a800, size 7 map[14]: type 1, range 32, base ed800000, size 7 found-> vendor=3D0x1000, dev=3D0x000c, revid=3D0x01 class=3D01-00-00, hdrtype=3D0x00, mfdev=3D0 subordinatebus=3D0 secondarybus=3D0 intpin=3Da, irq=3D10 map[10]: type 1, range 32, base 0000a400, size 8 map[14]: type 1, range 32, base ed000000, size 8 map[18]: type 1, range 32, base ec800000, size 12 found-> vendor=3D0x1106, dev=3D0x3074, revid=3D0x00 class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1 subordinatebus=3D0 secondarybus=3D0 found-> vendor=3D0x1106, dev=3D0x0571, revid=3D0x06 class=3D01-01-8a, hdrtype=3D0x00, mfdev=3D0 subordinatebus=3D0 secondarybus=3D0 intpin=3Da, irq=3D0 map[20]: type 1, range 32, base 0000a000, size 4 found-> vendor=3D0x1106, dev=3D0x3038, revid=3D0x1b class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0 subordinatebus=3D0 secondarybus=3D0 intpin=3Dd, irq=3D12 map[20]: type 1, range 32, base 00009800, size 5 found-> vendor=3D0x1106, dev=3D0x3038, revid=3D0x1b class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0 subordinatebus=3D0 secondarybus=3D0 intpin=3Dd, irq=3D12 map[20]: type 1, range 32, base 00009400, size 5 found-> vendor=3D0x1106, dev=3D0x3038, revid=3D0x1b class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0 subordinatebus=3D0 secondarybus=3D0 intpin=3Dd, irq=3D12 map[20]: type 1, range 32, base 00009000, size 5 pci0: <PCI bus> on pcib0 pcib1: <PCI to PCI bridge (vendor=3D1106 device=3Db099)> at device 1.0 on p= ci0 pci1: <PCI bus> on pcib1 pci0: <unknown card> (vendor=3D0x13f6, dev=3D0x0111) at 5.0 irq 11 atapci0: <Promise ATA100 controller> port 0xb000-0xb03f,0xb400-0xb403,0xb80= 0-0xb807,0xd000-0xd003,0xd400-0xd407 mem 0xef000000-0xef01ffff irq 12 at de= vice 6.0 on pci0 ata-: ata2 exists, using next available unit number ata2: iobase=3D0xd400 altiobase=3D0xd002 bmaddr=3D0xb000 ata2: mask=3D03 ostat0=3D50 ostat2=3D50 ata2-master: ATAPI 00 00 ata2-slave: ATAPI 00 00 ata2: mask=3D03 stat0=3D50 stat1=3D50 ata2-master: ATA 01 a5 ata2-slave: ATA 01 a5 ata2: devices=3D03 ata2: at 0xd400 on atapci0 ata3: iobase=3D0xb800 altiobase=3D0xb402 bmaddr=3D0xb008 ata3: mask=3D03 ostat0=3D50 ostat2=3D50 ata3-master: ATAPI 00 00 ata3-slave: ATAPI 00 00 ata3: mask=3D03 stat0=3D50 stat1=3D50 ata3-master: ATA 01 a5 ata3-slave: ATA 01 a5 ata3: devices=3D03 ata3: at 0xb800 on atapci0 using shared irq12. pci0: <NVidia model 0110 graphics accelerator> (vendor=3D0x10de, dev=3D0x01= 10) at 12.0 irq 12 xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xa800-0xa87f mem 0xed800000-0= xed80007f irq 11 at device 14.0 on pci0 xl0: Ethernet address: 00:04:76:9e:bd:4a xl0: media options word: a xl0: found MII/AUTO miibus0: <MII bus> on xl0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: OUI 0x00105a, model 0x0000, rev. 0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bpf: xl0 attached sym0: <895> port 0xa400-0xa4ff mem 0xec800000-0xec800fff,0xed000000-0xed000= 0ff irq 10 at device 15.0 on pci0 sym0: Tekram NVRAM, ID 7, Fast-40, LVD, parity checking sym0: open drain IRQ line driver, using on-chip SRAM sym0: using LOAD/STORE-based firmware. isab0: <PCI to ISA bridge (vendor=3D1106 device=3D3074)> at device 17.0 on = pci0 isa0: <ISA bus> on isab0 atapci1: <VIA 8233 ATA100 controller> port 0xa000-0xa00f irq 0 at device 17= .1 on pci0 ata0: iobase=3D0x01f0 altiobase=3D0x03f6 bmaddr=3D0xa000 ata0: mask=3D03 ostat0=3D50 ostat2=3D50 ata0-master: ATAPI 00 00 ata0-slave: ATAPI 00 00 ata0: mask=3D03 stat0=3D50 stat1=3D50 ata0-master: ATA 01 a5 ata0-slave: ATA 01 a5 ata0: devices=3D03 ata0: at 0x1f0 irq 14 on atapci1 ata1: iobase=3D0x0170 altiobase=3D0x0376 bmaddr=3D0xa008 ata1: mask=3D03 ostat0=3D50 ostat2=3D50 ata1-master: ATAPI 00 00 ata1-slave: ATAPI 00 00 ata1: mask=3D03 stat0=3D50 stat1=3D50 ata1-master: ATA 01 a5 ata1-slave: ATA 01 a5 ata1: devices=3D03 ata1: at 0x170 irq 15 on atapci1 pci0: <VIA 83C572 USB controller> (vendor=3D0x1106, dev=3D0x3038) at 17.2 i= rq 12 pci0: <VIA 83C572 USB controller> (vendor=3D0x1106, dev=3D0x3038) at 17.3 i= rq 12 pci0: <VIA 83C572 USB controller> (vendor=3D0x1106, dev=3D0x3038) at 17.4 i= rq 12 Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROMs> at iomem 0xc0000-0xcc7ff,0xd0000-0xd7fff,0xd8000-0xd87f= f on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0: atkbd0, generic (0), config:0x0, flags:0x1f0000 psm0: current command byte:0067 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 psm0: failed to reset the aux device. vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80=20 bf 1f 00 4f 0d 0e 00 00 00 50 9c 8e 8f 28 1f 96=20 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20 VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80=20 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96=20 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20 EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80=20 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96=20 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20 sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=3D0x0> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A, console sio1: irq maps: 0x1 0x9 0x1 0x1 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 isa_probe_children: probing PnP devices BIOS Geometries: 0:03fffe3f 0..1023=3D1024 cylinders, 0..254=3D255 heads, 1..63=3D63 sectors 1:03fffe3f 0..1023=3D1024 cylinders, 0..254=3D255 heads, 1..63=3D63 sectors 2:03fffe3f 0..1023=3D1024 cylinders, 0..254=3D255 heads, 1..63=3D63 sectors 3:03fffe3f 0..1023=3D1024 cylinders, 0..254=3D255 heads, 1..63=3D63 sectors 4:03fffe3f 0..1023=3D1024 cylinders, 0..254=3D255 heads, 1..63=3D63 sectors 0 accounted for Device configuration finished. bpf: lo0 attached IP packet filtering initialized, divert disabled, rule-based forwarding ena= bled, default to accept, logging limited to 100 packets/entry by default IPv6 packet filtering initialized, default to accept, logging limited to 10= 0 packets/entry ad0: success setting UDMA5 on VIA chip Creating DISK ad0 ar: FreeBSD check1 failed ad0: <IC35L060AVER07-0/ER6OA46A> ATA-5 disk at ata0-master ad0: 58644MB (120103200 sectors), 119150 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA100 ad0: piomode=3D4 dmamode=3D2 udmamode=3D5 cblid=3D1 ad1: success setting UDMA5 on VIA chip Creating DISK ad1 ar: FreeBSD check1 failed ad1: <IC35L060AVER07-0/ER6OA46A> ATA-5 disk at ata0-slave ad1: 58644MB (120103200 sectors), 119150 C, 16 H, 63 S, 512 B ad1: 16 secs/int, 1 depth queue, UDMA100 ad1: piomode=3D4 dmamode=3D2 udmamode=3D5 cblid=3D1 ad2: success setting UDMA5 on VIA chip Creating DISK ad2 ar: FreeBSD check1 failed ad2: <IC35L060AVER07-0/ER6OA46A> ATA-5 disk at ata1-master ad2: 58644MB (120103200 sectors), 119150 C, 16 H, 63 S, 512 B ad2: 16 secs/int, 1 depth queue, UDMA100 ad2: piomode=3D4 dmamode=3D2 udmamode=3D5 cblid=3D1 ad3: success setting UDMA5 on VIA chip Creating DISK ad3 ar: FreeBSD check1 failed ad3: <IC35L060AVER07-0/ER6OA46A> ATA-5 disk at ata1-slave ad3: 58644MB (120103200 sectors), 119150 C, 16 H, 63 S, 512 B ad3: 16 secs/int, 1 depth queue, UDMA100 ad3: piomode=3D4 dmamode=3D2 udmamode=3D5 cblid=3D1 ad4: success setting UDMA5 on Promise chip Creating DISK ad4 ad5: success setting UDMA5 on Promise chip Creating DISK ad5 ad5: <IC35L060AVER07-0/ER6OA46A> ATA-5 disk at ata2-slave ad5: 58644MB (120103200 sectors), 119150 C, 16 H, 63 S, 512 B ad5: 16 secs/int, 1 depth queue, UDMA100 ad5: piomode=3D4 dmamode=3D2 udmamode=3D5 cblid=3D1 ad6: success setting UDMA5 on Promise chip Creating DISK ad6 ad7: success setting UDMA5 on Promise chip Creating DISK ad7 ad7: <IC35L060AVER07-0/ER6OA46A> ATA-5 disk at ata3-slave ad7: 58644MB (120103200 sectors), 119150 C, 16 H, 63 S, 512 B ad7: 16 secs/int, 1 depth queue, UDMA100 ad7: piomode=3D4 dmamode=3D2 udmamode=3D5 cblid=3D1 Waiting 5 seconds for SCSI devices to settle (noperiph:sym0:0:-1:-1): SCSI BUS reset delivered. sa0 at sym0 bus 0 target 14 lun 0 sa0: <SONY SDT-10000 0101> Removable Sequential Access SCSI-2 device=20 sa0: Serial Number 0004702230 sa0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit) pass0 at sym0 bus 0 target 14 lun 0 pass0: <SONY SDT-10000 0101> Removable Sequential Access SCSI-2 device=20 pass0: Serial Number 0004702230 pass0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit) Mounting root from ufs:/dev/ar0s1a no such device 'ar' setrootbyname failed ffs_mountroot: can't find rootvp Root mount failed: 6 Manual root filesystem specification: <fstype>:<device> Mount <device> using filesystem <fstype> eg. ufs:/dev/da0s1a ? List valid disk boot devices <empty line> Abort manual input mountroot>=20 --24zk1gE8NUlDmwG9 Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dmesg.hest" Content-Transfer-Encoding: quoted-printable Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.5-STABLE #0: Sat Feb 9 00:38:45 CET 2002 root@prison.pil.dk:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz CPU: AMD Athlon(TM)Processor (1333.39-MHz 686-class CPU) Origin =3D "AuthenticAMD" Id =3D 0x642 Stepping =3D 2 Features=3D0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,= CMOV,PAT,PSE36,MMX,FXSR> AMD Features=3D0xc0440000<<b18>,AMIE,DSP,3DNow!> real memory =3D 134135808 (130992K bytes) avail memory =3D 125861888 (122912K bytes) Preloaded elf kernel "kernel.old" at 0xc0496000. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 10 entries at 0xc00f13a0 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib1: <PCI to PCI bridge (vendor=3D1106 device=3Db099)> at device 1.0 on p= ci0 pci1: <PCI bus> on pcib1 pci0: <unknown card> (vendor=3D0x13f6, dev=3D0x0111) at 5.0 irq 11 atapci0: <Promise ATA100 controller> port 0xb000-0xb03f,0xb400-0xb403,0xb80= 0-0xb807,0xd000-0xd003,0xd400-0xd407 mem 0xef000000-0xef01ffff irq 12 at de= vice 6.0 on pci0 ata2: at 0xd400 on atapci0 ata3: at 0xb800 on atapci0 pci0: <NVidia model 0110 graphics accelerator> at 12.0 irq 12 xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xa800-0xa87f mem 0xed800000-0= xed80007f irq 11 at device 14.0 on pci0 xl0: Ethernet address: 00:04:76:9e:bd:4a miibus0: <MII bus> on xl0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sym0: <895> port 0xa400-0xa4ff mem 0xec800000-0xec800fff,0xed000000-0xed000= 0ff irq 10 at device 15.0 on pci0 sym0: Tekram NVRAM, ID 7, Fast-40, LVD, parity checking isab0: <PCI to ISA bridge (vendor=3D1106 device=3D3074)> at device 17.0 on = pci0 isa0: <ISA bus> on isab0 atapci1: <VIA 82C686 ATA100 controller> port 0xa000-0xa00f irq 0 at device = 17.1 on pci0 ata0: at 0x1f0 irq 14 on atapci1 ata1: at 0x170 irq 15 on atapci1 uhci0: <VIA 83C572 USB controller> port 0x9800-0x981f irq 12 at device 17.2= on pci0 usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <VIA 83C572 USB controller> port 0x9400-0x941f irq 12 at device 17.3= on pci0 usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <VIA 83C572 USB controller> port 0x9000-0x901f irq 12 at device 17.4= on pci0 usb2: <VIA 83C572 USB controller> on uhci2 usb2: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered orm0: <Option ROMs> at iomem 0xc0000-0xcc7ff,0xd0000-0xd7fff,0xd8000-0xd87f= f on isa0 fdc0: direction bit not set fdc0: cmd 3 failed at out byte 1 of 3 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x100> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A, console sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ad0: 58644MB <IC35L060AVER07-0> [119150/16/63] at ata0-master UDMA100 ad1: 58644MB <IC35L060AVER07-0> [119150/16/63] at ata0-slave UDMA100 ad2: 58644MB <IC35L060AVER07-0> [119150/16/63] at ata1-master UDMA100 ad3: 58644MB <IC35L060AVER07-0> [119150/16/63] at ata1-slave UDMA100 ad5: 58644MB <IC35L060AVER07-0> [119150/16/63] at ata2-slave UDMA100 ar0: 117288MB <ATA RAID0 array> [14952/255/63] subdisks: ad4: 58644MB <IC35L060AVER07-0> [119150/16/63] at ata2-master UDMA100 ad6: 58644MB <IC35L060AVER07-0> [119150/16/63] at ata3-master UDMA100 ad7: 58644MB <IC35L060AVER07-0> [119150/16/63] at ata3-slave UDMA100 Waiting 15 seconds for SCSI devices to settle sa0 at sym0 bus 0 target 14 lun 0 sa0: <SONY SDT-10000 0101> Removable Sequential Access SCSI-2 device=20 sa0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit) Mounting root from ufs:/dev/ar0s1a ad4s1: slice extends beyond end of disk: truncating from 240203817 to 12010= 3137 sectors ad4: raw partition size !=3D slice size ad4: start 63, end 120103199, size 120103137 ad4c: start 63, end 240203879, size 240203817 ad4: truncating raw partition ad4: rejecting partition in BSD label: it isn't entirely within the slice ad4: start 63, end 120103199, size 120103137 ad4h: start 7520319, end 240203879, size 232683561 ad4s1: slice extends beyond end of disk: truncating from 240203817 to 12010= 3137 sectors [snip] IP packet filtering initialized, divert disabled, rule-based forwarding dis= abled, default to deny, logging disabled IPv6 packet filtering initialized, logging disabled --24zk1gE8NUlDmwG9-- --uXxzq0nDebZQVNAZ Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (FreeBSD) Comment: For info see http://www.gnupg.org iD8DBQE9IsW7qy9aWxUlaZARAn9MAJ9jVPFq/SBEVGzWhFvNrgYlZepUzACdEBre PJ04a0i33aLvqSI/alD6BxU= =oh/6 -----END PGP SIGNATURE----- --uXxzq0nDebZQVNAZ-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020703113659.B22250>