Date: Thu, 31 May 2012 13:42:07 -0400 From: Mike Tancsa <mike@sentex.net> To: John Baldwin <jhb@freebsd.org> Cc: pyunyh@gmail.com, freebsd-hardware@freebsd.org Subject: Re: pcie realtek issue (re driver) Message-ID: <4FC7AD6F.60004@sentex.net> In-Reply-To: <201205311057.05234.jhb@freebsd.org> References: <4FC03C83.4030109@sentex.net> <201205301126.40105.jhb@freebsd.org> <20120531161418.GF1467@michelle.cdnetworks.com> <201205311057.05234.jhb@freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. --------------060302050307020002060105 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit On 5/31/2012 10:57 AM, John Baldwin wrote: >> >> Right, but what if it is not(from the pciconf output)? >> I'm pretty sure re(4) used RF_ACTIVE with bus_alloc_resource_any(9). > > Hmm, is this pciconf output when the driver is attached? Hi, Here are some of the variations attached in a txt file. Could this just be a broken card ? I will try and boot up another OS on the box and see if it works. ---Mike -- ------------------- Mike Tancsa, tel +1 519 651 3400 Sentex Communications, mike@sentex.net Providing Internet services since 1994 www.sentex.net Cambridge, Ontario Canada http://www.tancsa.com/ --------------060302050307020002060105 Content-Type: text/plain; charset=windows-1252; name="re.txt" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="re.txt" GENERIC kernel, no loader tuneables with if_re loaded from /boot/loader.conf none2@pci0:4:0:0: class=0x020000 card=0xffff10ec chip=0x816810ec rev=0x03 hdr=0x00 vendor = 'Realtek Semiconductor Co., Ltd.' device = 'RTL8111/8168B PCI Express Gigabit Ethernet controller' class = network subclass = ethernet bar [10] = type I/O Port, range 32, base 0, size 256, disabled bar [18] = type Memory, range 64, base 0xdfa00000, size 4096, disabled bar [20] = type Prefetchable Memory, range 64, base 0, size 16384, disabled cap 01[40] = powerspec 7 supports D0 D1 D2 D3 current D3 pci4: <ACPI PCI bus> on pcib4 pci4: domain=0, physical bus=4 found-> vendor=0x10ec, dev=0x8168, revid=0x03 domain=0, bus=4, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[10]: type I/O Port, range 32, base 0, size 8, port disabled map[18]: type Memory, range 64, base 0, size 12, memory disabled map[20]: type Prefetchable Memory, range 64, base 0, size 14, memory disabled re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> at device 0.0 on pci4 pcib0: allocated type 3 (0xdfa00000-0xdfafffff) for rid 20 of pcib4 pcib4: allocated initial memory window of 0xdfa00000-0xdfafffff pcib4: allocated memory range (0xdfa00000-0xdfa00fff) for rid 18 of re0 re0: Lazy allocation of 0x1000 bytes rid 0x18 type 3 at 0xdfa00000 re0: MSI count : 0 re0: MSI-X count : 0 pcib4: matched entry for 4.0.INTA pcib4: slot 0 INTA hardwired to IRQ 18 re0: turning off MSI enable bit. re0: ASPM disabled re0: Chip rev. 0x7c800000 re0: MAC rev. 0x00400000 re0: reset never completed! re0: PHY write failed re0: PHY write failed re0: attaching PHYs failed device_attach: re0 attach returned 6 ------------------------ with if_re_load="YES" hw.re.msi_disable=1 pci4: <ACPI PCI bus> on pcib4 pci4: domain=0, physical bus=4 found-> vendor=0x10ec, dev=0x8168, revid=0x03 domain=0, bus=4, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 3 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit MSI-X supports 4 messages in map 0x20 map[10]: type I/O Port, range 32, base 0, size 8, enabled map[18]: type Memory, range 64, base 0, size 12, enabled map[20]: type Prefetchable Memory, range 64, base 0, size 14, enabled re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> at device 0.0 on pci4 pcib4: allocated memory range (0xfe200000-0xfe200fff) for rid 18 of re0 re0: Lazy allocation of 0x1000 bytes rid 0x18 type 3 at 0xfe200000 re0: MSI count : 1 re0: MSI-X count : 4 pcib4: allocated memory range (0xfe204000-0xfe207fff) for rid 20 of re0 re0: Lazy allocation of 0x4000 bytes rid 0x20 type 3 at 0xfe204000 re0: attempting to allocate 1 MSI-X vectors (4 supported) msi: routing MSI-X IRQ 266 to local APIC 0 vector 62 re0: using IRQ 266 for MSI-X re0: Using 1 MSI-X message re0: Chip rev. 0x28000000 re0: MAC rev. 0x00000000 miibus0: <MII bus> on re0 ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0 ukphy0: OUI 0x00e0fc, model 0x003f, rev. 15 re0: PHY write failed re0: PHY write failed ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 100baseT4, 1000baseSX, 1000baseSX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow re0: PHY write failed re0: PHY write failed re0: bpf attached re0: Ethernet address: 00:0a:cd:1c:ba:89 re0@pci0:4:0:0: class=0x020000 card=0x816810ec chip=0x816810ec rev=0x03 hdr=0x00 vendor = 'Realtek Semiconductor Co., Ltd.' device = 'RTL8111/8168B PCI Express Gigabit Ethernet controller' class = network subclass = ethernet bar [10] = type I/O Port, range 32, base 0, size 256, disabled bar [18] = type Memory, range 64, base 0xfe200000, size 4096, disabled bar [20] = type Prefetchable Memory, range 64, base 0xfe204000, size 16384, disabled cap 01[40] = powerspec 3 supports D0 D1 D2 D3 current D0 cap 05[50] = MSI supports 1 message, 64 bit cap 10[70] = PCI-Express 2 endpoint IRQ 2 max data 128(128) link x1(x1) cap 11[ac] = MSI-X supports 4 messages in map 0x20 cap 03[cc] = VPD ecap 0001[100] = AER 1 1 fatal 1 non-fatal 3 corrected ecap 0002[140] = VC 1 max VC0 ecap 0003[160] = Serial 1 83050000684ce000 but it does not work And with nothing loaded none2@pci0:4:0:0: class=0x020000 card=0x816810ec chip=0x816810ec rev=0x03 hdr=0x00 vendor = 'Realtek Semiconductor Co., Ltd.' device = 'RTL8111/8168B PCI Express Gigabit Ethernet controller' class = network subclass = ethernet bar [10] = type I/O Port, range 32, base 0xd000, size 256, enabled bar [18] = type Memory, range 64, base 0xfe200000, size 4096, enabled bar [20] = type Prefetchable Memory, range 64, base 0xf0000000, size 16384, enabled cap 01[40] = powerspec 3 supports D0 D1 D2 D3 current D0 cap 05[50] = MSI supports 1 message, 64 bit cap 10[70] = PCI-Express 2 endpoint IRQ 2 max data 128(128) link x1(x1) cap 11[ac] = MSI-X supports 4 messages in map 0x20 cap 03[cc] = VPD ecap 0001[100] = AER 1 1 fatal 1 non-fatal 3 corrected ecap 0002[140] = VC 1 max VC0 ecap 0003[160] = Serial 1 83050000684ce000 The board is an Intel one # dmidecode 2.11 SMBIOS 2.6 present. 56 structures occupying 2284 bytes. Table at 0x000E9450. Handle 0x0000, DMI type 0, 24 bytes BIOS Information Vendor: Intel Corp. Version: BEH6110H.86A.0042.2012.0327.2202 Release Date: 03/27/2012 Address: 0xF0000 Runtime Size: 64 kB ROM Size: 1024 kB Characteristics: PCI is supported BIOS is upgradeable BIOS shadowing is allowed Boot from CD is supported Selectable boot is supported BIOS ROM is socketed EDD is supported 5.25"/1.2 MB floppy services are supported (int 13h) 3.5"/720 kB floppy services are supported (int 13h) 3.5"/2.88 MB floppy services are supported (int 13h) Print screen service is supported (int 5h) 8042 keyboard services are supported (int 9h) Serial services are supported (int 14h) Printer services are supported (int 17h) ACPI is supported USB legacy is supported BIOS boot specification is supported Targeted content distribution is supported Base Board Information Manufacturer: Intel Corporation Product Name: DH61BE Version: AAG14062-208 Serial Number: BTBE212003LQ Asset Tag: To be filled by O.E.M. Features: Board is a hosting board Board is replaceable Location In Chassis: To be filled by O.E.M. Chassis Handle: 0x0003 Type: Motherboard Contained Object Handles: 0 Handle 0x0035, DMI type 9, 17 bytes System Slot Information Designation: PCIeSlot Type: x1 PCI Express x1 Current Usage: In Use Length: Short ID: 4 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Bus Address: 0000:00:1c.2 Handle 0x0036, DMI type 9, 17 bytes System Slot Information Designation: PCIeSlot Type: x1 PCI Express x1 Current Usage: In Use Length: Short ID: 3 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Bus Address: 0000:00:1c.4 --------------060302050307020002060105--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4FC7AD6F.60004>