Date: Tue, 7 Feb 2006 21:47:42 -0500 From: "Michael W. Lucas" <mwlucas@blackhelicopters.org> To: current@freebsd.org Subject: Re: snap10 works, snap12 doesn't Message-ID: <20060208024742.GA78989@bewilderbeast.blackhelicopters.org> In-Reply-To: <20060206143726.GA67480@bewilderbeast.blackhelicopters.org> References: <20060206143726.GA67480@bewilderbeast.blackhelicopters.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Following up on my own post: I've been doing a binary search to identify the commit that broke -current on this laptop, by cvsup-ing src-sys to various dates and doing "make buildkernel && make installkernel". The snapshot10 kernel boots reliably, but later kernels work intermittently. For example, a January 3 kernel boots roughly 1 time out of 3. When the boot fails, there is no panic message or other shutdown message; the screen goes back, then returns to the BIOS. This makes the binary search kind of useless, it seems. I don't think it's a hardware issue, as snap10 runs perfectly. I'm still trying to debug this, but has anyone had similar experiences lately? On Mon, Feb 06, 2006 at 09:37:26AM -0500, Michael W. Lucas wrote: >=20 > Hi, >=20 > I have a new Sager amd64 dual-core notebook, purchased at the end of > 2005, running FreeBSD-current. I originally installed i386 snap10. >=20 > I'm attempting to upgrade this system to snap12. Before installing > the new world, of course I install the new kernel and try it. The > system will not boot successfully on a snap12 kernel; it shuts itself > off right after the uhub4 probe without panicing or providing any > debugging information whatsoever. >=20 > UPDATING doesn't seem to have anything relevant. >=20 > I've attached the snap10 and snap12 boot -v output. >=20 > Any suggestions on how to troubleshoot this problem? >=20 > Thanks, > =3D=3Dml >=20 >=20 >=20 > --=20 > Michael W. Lucas mwlucas@FreeBSD.org, mwlucas@BlackHelicopters.org > http://www.BlackHelicopters.org/~mwlucas/ >=20 > "The cloak of anonymity protects me from the nuisance of caring." -Non Se= quitur > OK =0D > OK XR=08 =08=08 =08BOOT -V=0D > |=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-= =08\=08|=08/=08-=08\=08|=08/=08-=08\=08/boot/kernel/acpi.ko text=3D0x43fec = |=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08data=3D= 0x24a0+0x1010 /=08-=08syms=3D[0x4+0x7d30\=08|=08+0x4+0xaa3d/=08-=08]=0D > \=08|=08/=08-=08\=08|=08/=08GDB: no debug ports present=0D > KDB: debugger backends: ddb=0D > KDB: current backend: ddb=0D > Copyright (c) 1992-2005 The FreeBSD Project.=0D > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994= =0D > The Regents of the University of California. All rights reserved.=0D > FreeBSD 7.0-CURRENT-SNAP010 #0: Tue Dec 13 11:25:44 UTC 2005=0D > root@harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC=0D > WARNING: WITNESS option enabled, expect reduced performance.=0D > Timecounter "i8254" frequency 1193182 Hz quality 0=0D > CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ (2200.11-MHz 686-clas= s CPU)=0D > Origin =3D "AuthenticAMD" Id =3D 0x20fb1 Stepping =3D 1=0D > Features=3D0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,= PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>=0D > Features2=3D0x1<SSE3>=0D > AMD Features=3D0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow+,3DNow>=0D > AMD Features2=3D0x3<LAHF,CMP>=0D > Cores per package: 2=0D > real memory =3D 1072693248 (1023 MB)=0D > avail memory =3D 1040564224 (992 MB)=0D > ACPI APIC Table: <PTLTD APIC >=0D > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs=0D > cpu0 (BSP): APIC ID: 0=0D > cpu1 (AP): APIC ID: 1=0D > MADT: Forcing active-low polarity and level trigger for SCI=0D > ioapic0 <Version 0.3> irqs 0-23 on motherboard=0D > ioapic1 <Version 0.3> irqs 24-47 on motherboard=0D > npx0: [FAST]=0D > npx0: <math processor> on motherboard=0D > npx0: INT 16 interface=0D > acpi0: <PTLTD RSDT> on motherboard=0D > ACPI-0448: *** Error: Looking up [\_SB_.PCI0.PIB_.LNKH] in namespace,= AE_NOT_FOUND=0D > SearchNode 0xc4ab6860 StartNode 0xc4ab6860 ReturnNode 0=0D > ACPI-0448: *** Error: Looking up [\_SB_.PCI0.LNKH] in namespace, AE_N= OT_FOUND=0D > SearchNode 0xc4b1d140 StartNode 0xc4b1d140 ReturnNode 0=0D > ACPI-0448: *** Error: Looking up [\_SB_.PCI0.LNKH] in namespace, AE_N= OT_FOUND=0D > SearchNode 0xc4b1cb20 StartNode 0xc4b1cb20 ReturnNode 0=0D > ACPI-0448: *** Error: Looking up [\_SB_.PCI0.LNKH] in namespace, AE_N= OT_FOUND=0D > SearchNode 0xc4b1c9c0 StartNode 0xc4b1c9c0 ReturnNode 0=0D > acpi_ec0: <Embedded Controller: GPE 0xb> port 0x62,0x66 on acpi0=0D > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000=0D > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0=0D > cpu0: <ACPI CPU> on acpi0=0D > cpu1: <ACPI CPU> on acpi0=0D > acpi_button0: <Power Button> on acpi0=0D > acpi_acad0: <AC Adapter> on acpi0=0D > battery0: <ACPI Control Method Battery> on acpi0=0D > acpi_lid0: <Control Method Lid Switch> on acpi0=0D > acpi_button1: <Sleep Button> on acpi0=0D > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0=0D > pci0: <ACPI PCI bus> on pcib0=0D > agp0: <VIA 3238 host to PCI bridge> mem 0xb0000000-0xbfffffff at device 0= .0 on pci0=0D > pci0: <base peripheral, interrupt controller> at device 0.5 (no driver at= tached)=0D > pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0=0D > pci1: <ACPI PCI bus> on pcib1=0D > pcib2: <ACPI PCI-PCI bridge> irq 27 at device 2.0 on pci0=0D > pci2: <ACPI PCI bus> on pcib2=0D > pci2: <display, VGA> at device 0.0 (no driver attached)=0D > pcib3: <ACPI PCI-PCI bridge> irq 31 at device 3.0 on pci0=0D > pci3: <ACPI PCI bus> on pcib3=0D > pcib4: <ACPI PCI-PCI bridge> irq 31 at device 3.2 on pci0=0D > pci4: <ACPI PCI bus> on pcib4=0D > cbb0: <TI1410 PCI-CardBus Bridge> mem 0x80000000-0x80000fff irq 18 at dev= ice 5.0 on pci0=0D > cardbus0: <CardBus bus> on cbb0=0D > pccard0: <16-bit PCCard bus> on cbb0=0D > fwohci0: <Texas Instruments TSB43AB22/A> mem 0xd2206000-0xd22067ff,0xd220= 0000-0xd2203fff irq 20 at device 6.0 on pci0=0D > fwohci0: OHCI version 1.10 (ROM=3D1)=0D > fwohci0: No. of Isochronous channels is 4.=0D > fwohci0: EUI64 00:90:f5:00:00:48:aa:64=0D > fwohci0: Phy 1394a available S400, 2 ports.=0D > fwohci0: Link S400, max_rec 2048 bytes.=0D > firewire0: <IEEE1394(FireWire) bus> on fwohci0=0D > fwe0: <Ethernet over FireWire> on firewire0=0D > if_fwe0: Fake Ethernet address: 02:90:f5:48:aa:64=0D > fwe0: Ethernet address: 02:90:f5:48:aa:64=0D > fwe0: if_start running deferred for Giant=0D > sbp0: <SBP-2/SCSI over FireWire> on firewire0=0D > fwohci0: Initiate bus reset=0D > fwohci0: node_id=3D0xc000ffc0, gen=3D1, CYCLEMASTER mode=0D > firewire0: 1 nodes, maxhop <=3D 0, cable IRM =3D 0 (me)=0D > firewire0: bus manager 0 (me)=0D > re0: <RealTek 8169SB Single-chip Gigabit Ethernet> port 0x1000-0x10ff mem= 0xd2206800-0xd22068ff irq 19 at device 8.0 on pci0=0D > miibus0: <MII bus> on re0=0D > rgephy0: <RTL8169S/8110S media interface> on miibus0=0D > rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 100= 0baseTX-FDX, auto=0D > re0: Ethernet address: 00:90:f5:48:aa:65=0D > ral0: <Ralink Technology RT2500> mem 0xd2204000-0xd2205fff irq 17 at devi= ce 10.0 on pci0=0D > ral0: MAC/BBP RT2560 (rev 0x04), RF RT2525=0D > ral0: Ethernet address: 00:13:d3:68:28:fd=0D > atapci0: <VIA 6420 SATA150 controller> port 0x20b0-0x20b7,0x20a4-0x20a7,0= x20a8-0x20af,0x20a0-0x20a3,0x2080-0x208f,0x1400-0x14ff irq 20 at device 15.= 0 on pci0=0D > ata2: <ATA channel 0> on atapci0=0D > ata3: <ATA channel 1> on atapci0=0D > atapci1: <VIA 8237 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177= ,0x376,0x2090-0x209f at device 15.1 on pci0=0D > ata0: <ATA channel 0> on atapci1=0D > ata1: <ATA channel 1> on atapci1=0D > uhci0: <VIA 83C572 USB controller> port 0x2000-0x201f irq 21 at device 16= .0 on pci0=0D > uhci0: [GIANT-LOCKED]=0D > usb0: <VIA 83C572 USB controller> on uhci0=0D > usb0: USB revision 1.0=0D > uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0D > uhub0: 2 ports with 2 removable, self powered=0D > uhci1: <VIA 83C572 USB controller> port 0x2020-0x203f irq 21 at device 16= .1 on pci0=0D > uhci1: [GIANT-LOCKED]=0D > usb1: <VIA 83C572 USB controller> on uhci1=0D > usb1: USB revision 1.0=0D > uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0D > uhub1: 2 ports with 2 removable, self powered=0D > uhci2: <VIA 83C572 USB controller> port 0x2040-0x205f irq 21 at device 16= .2 on pci0=0D > uhci2: [GIANT-LOCKED]=0D > usb2: <VIA 83C572 USB controller> on uhci2=0D > usb2: USB revision 1.0=0D > uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0D > uhub2: 2 ports with 2 removable, self powered=0D > uhci3: <VIA 83C572 USB controller> port 0x2060-0x207f irq 21 at device 16= .3 on pci0=0D > uhci3: [GIANT-LOCKED]=0D > usb3: <VIA 83C572 USB controller> on uhci3=0D > usb3: USB revision 1.0=0D > uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0D > uhub3: 2 ports with 2 removable, self powered=0D > ehci0: <VIA VT6202 USB 2.0 controller> mem 0xd2206c00-0xd2206cff irq 21 a= t device 16.4 on pci0=0D > ehci0: [GIANT-LOCKED]=0D > usb4: EHCI version 1.0=0D > usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3=0D > usb4: <VIA VT6202 USB 2.0 controller> on ehci0=0D > usb4: USB revision 2.0=0D > uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1=0D > uhub4: 8 ports with 8 removable, self powered=0D > ugen0: vendor 0xeb1a product 0x2750, rev 2.00/1.00, addr 2=0D > umass0: GENERIC USB Storage Device, rev 2.00/1.8a, addr 3=0D > isab0: <PCI-ISA bridge> at device 17.0 on pci0=0D > isa0: <ISA bus> on isab0=0D > pcm0: <VIA VT8237> port 0x1800-0x18ff irq 22 at device 17.5 on pci0=0D > pcm0: <Avance Logic ALC850 AC97 Codec>=0D > pcm0: <VIA DXS Enabled: DXS 4 / SGD 1 / REC 1>=0D > pci0: <simple comms> at device 17.6 (no driver attached)=0D > acpi_tz0: <Thermal Zone> on acpi0=0D > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0=0D > atkbd0: <AT Keyboard> irq 1 on atkbdc0=0D > kbd0 at atkbd0=0D > atkbd0: [GIANT-LOCKED]=0D > psm0: <PS/2 Mouse> irq 12 on atkbdc0=0D > psm0: [GIANT-LOCKED]=0D > psm0: model IntelliMouse, device ID 3=0D > ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq = 1 on acpi0=0D > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode=0D > ppc0: FIFO with 16/16/8 bytes threshold=0D > ppbus0: <Parallel port bus> on ppc0=0D > plip0: <PLIP network interface> on ppbus0=0D > lpt0: <Printer> on ppbus0=0D > lpt0: Interrupt-driven port=0D > ppi0: <Parallel I/O> on ppbus0=0D > sio0: configured irq 4 not in bitmap of probed irqs 0=0D > sio0: port may not be enabled=0D > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on a= cpi0=0D > sio0: type 16550A, console=0D > pmtimer0 on isa0=0D > orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xdc000-0xdffff pnpid OR= M0000 on isa0=0D > fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 = on isa0=0D > fdc0: [FAST]=0D > sc0: <System console> at flags 0x100 on isa0=0D > sc0: VGA <16 virtual consoles, flags=3D0x100>=0D > sio1: configured irq 3 not in bitmap of probed irqs 0=0D > sio1: port may not be enabled=0D > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0= =0D > Timecounters tick every 1.000 msec=0D > acd0: DVDR <PIONEER DVD-RW DVR-K16/1.33> at ata1-master UDMA33=0D > ad4: 76319MB <HTS721080G9SA00 MC4OC10H> at ata2-master SATA150=0D > SMP: AP CPU #1 Launched!=0D > da0 at umass-sim0 bus 0 target 0 lun 0=0D > da0: <GENERIC USB Storage-CFC 019A> Removable Direct Access SCSI-0 device= =0D > da0: 40.000MB/s transfers=0D > da0: Attempt to query device size failed: NOT READY, Medium not present=0D > da1 at umass-sim0 bus 0 target 0 lun 1=0D > da1: <GENERIC USB Storage-SDC 019A> Removable Direct Access SCSI-0 device= =0D > da1: 40.000MB/s transfers=0D > da1: Attempt to query device size failed: NOT READY, Medium not present=0D > da2 at umass-sim0 bus 0 target 0 lun 2=0D > da2: <GENERIC USB Storage-SMC 019A> Removable Direct Access SCSI-0 device= =0D > da2: 40.000MB/s transfers=0D > da2: Attempt to query device size failed: NOT READY, Medium not present=0D > da3 at umass-sim0 bus 0 target 0 lun 3=0D > da3: <GENERIC USB Storage-MSC 019A> Removable Direct Access SCSI-0 device= =0D > da3: 40.000MB/s transfers=0D > da3: Attempt to query device size failed: NOT READY, Medium not present=0D > (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 =0D > (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error=0D > (da0:umass-sim0:0:0:0): SCSI Status: Check Condition=0D > (da0:umass-sim0:0:0:0): NOT READY asc:3a,0=0D > (da0:umass-sim0:0:0:0): Medium not present=0D > (da0:umass-sim0:0:0:0): Unretryable error=0D > Opened disk da0 -> 6=0D > (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 =0D > (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error=0D > (da0:umass-sim0:0:0:0): SCSI Status: Check Condition=0D > (da0:umass-sim0:0:0:0): NOT READY asc:3a,0=0D > (da0:umass-sim0:0:0:0): Medium not present=0D > (da0:umass-sim0:0:0:0): Unretryable error=0D > Opened disk da0 -> 6=0D > (da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0 =0D > (da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error=0D > (da1:umass-sim0:0:0:1): SCSI Status: Check Condition=0D > (da1:umass-sim0:0:0:1): NOT READY asc:3a,0=0D > (da1:umass-sim0:0:0:1): Medium not present=0D > (da1:umass-sim0:0:0:1): Unretryable error=0D > Opened disk da1 -> 6=0D > (da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0 =0D > (da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error=0D > (da1:umass-sim0:0:0:1): SCSI Status: Check Condition=0D > (da1:umass-sim0:0:0:1): NOT READY asc:3a,0=0D > (da1:umass-sim0:0:0:1): Medium not present=0D > (da1:umass-sim0:0:0:1): Unretryable error=0D > Opened disk da1 -> 6=0D > (da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0 =0D > (da2:umass-sim0:0:0:2): CAM Status: SCSI Status Error=0D > (da2:umass-sim0:0:0:2): SCSI Status: Check Condition=0D > (da2:umass-sim0:0:0:2): NOT READY asc:3a,0=0D > (da2:umass-sim0:0:0:2): Medium not present=0D > (da2:umass-sim0:0:0:2): Unretryable error=0D > Opened disk da2 -> 6=0D > (da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0 =0D > (da2:umass-sim0:0:0:2): CAM Status: SCSI Status Error=0D > (da2:umass-sim0:0:0:2): SCSI Status: Check Condition=0D > (da2:umass-sim0:0:0:2): NOT READY asc:3a,0=0D > (da2:umass-sim0:0:0:2): Medium not present=0D > (da2:umass-sim0:0:0:2): Unretryable error=0D > Opened disk da2 -> 6=0D > (da3:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0 =0D > (da3:umass-sim0:0:0:3): CAM Status: SCSI Status Error=0D > (da3:umass-sim0:0:0:3): SCSI Status: Check Condition=0D > (da3:umass-sim0:0:0:3): NOT READY asc:3a,0=0D > (da3:umass-sim0:0:0:3): Medium not present=0D > (da3:umass-sim0:0:0:3): Unretryable error=0D > Opened disk da3 -> 6=0D > (da3:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0 =0D > (da3:umass-sim0:0:0:3): CAM Status: SCSI Status Error=0D > (da3:umass-sim0:0:0:3): SCSI Status: Check Condition=0D > (da3:umass-sim0:0:0:3): NOT READY asc:3a,0=0D > (da3:umass-sim0:0:0:3): Medium not present=0D > (da3:umass-sim0:0:0:3): Unretryable error=0D > Opened disk da3 -> 6=0D > Trying to mount root from ufs:/dev/ad4s1a=0D > Loading configuration files.=0D > kernel dumps on /dev/ad4s1b=0D > Entropy harvesting: interrupts ethernet point_to_point kickstart.=0D > swapon: adding /dev/ad4s1b as swap device=0D > Starting file system checks:=0D > /dev/ad4s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS=0D > /dev/ad4s1a: clean, 60316 free (412 frags, 7488 blocks, 0.2% fragmentatio= n)=0D > /dev/ad4s1e: FILE SYSTEM CLEAN; SKIPPING CHECKS=0D > /dev/ad4s1e: clean, 253789 free (29 frags, 31720 blocks, 0.0% fragmentati= on)=0D > /dev/ad4s1f: FILE SYSTEM CLEAN; SKIPPING CHECKS=0D > /dev/ad4s1f: clean, 18855317 free (42613 frags, 2351588 blocks, 0.1% frag= mentation)=0D > /dev/ad4s1d: FILE SYSTEM CLEAN; SKIPPING CHECKS=0D > /dev/ad4s1d: clean, 188250 free (13098 frags, 21894 blocks, 1.7% fragment= ation)=0D > Setting hostname: humvee.blackhelicopters.org.=0D > debug.witness.watch: 1 -> 0=0D > vfs.usermount: 0 -> 1=0D > lo0: flags=3D8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384=0D > inet6 ::1 prefixlen 128 =0D > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5 =0D > inet 127.0.0.1 netmask 0xff000000 =0D > Creating and/or trimming log files:.=0D > Starting syslogd.=0D > Additional routing options:.=0D > Starting devd.=0D > hw.acpi.cpu.cx_lowest: C1 -> C1=0D > Mounting NFS file systems:.=0D > Checking for core dump on /dev/ad4s1b...=0D > savecore: no dumps found=0D > ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/loca= l/lib=0D > a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout /usr/X11R6/lib/ao= ut=0D > Recovering vi editor sessions:.=0D > Starting usbd.=0D > Starting local daemons:.=0D > Starting lpd.=0D > Updating motd.=0D > Configuring syscons: keymap font8x8 blanktime allscreens.=0D > Starting sshd.=0D > Initial i386 initialization:.=0D > Additional ABI support:.=0D > Starting cron.=0D > Local package initialization:.=0D > Additional TCP options:.=0D > Starting default moused:.=0D > Starting background file system checks in 60 seconds.=0D > =0D > Mon Feb 6 09:20:45 EST 2006=0D > Shutting down daemon processes:.=0D > Stopping cron.=0D > Shutting down local daemons:.=0D > Writing entropy file:.=0D > Terminated=0D > .=0D > =E0Waiting (max 60 seconds) for system process `vnlru' to stop...done=0D > Waiting (max 60 seconds) for system process `bufdaemon' to stop...done=0D > Waiting (max 60 seconds) for system process `syncer' to stop...=0D > Syncing disks, vnodes remaining...4 3 2 1 0 0=20 > OK g=08 =08unload=0D > OK load /book=08 =08t/kernel12/kernel=0D > |=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-= =08/boot/kernel12/kernel text=3D0x4b2d40 \=08|=08/=08-=08\=08|=08/=08-=08\= =08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08= -=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|= =08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08= \=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/= =08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08= |=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-= =08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08= /=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\= =08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08= -=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|= =08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08= \=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/= =08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08= |=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-= =08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08= /=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08data=3D0x84c40+= 0xa02ac |=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|= =08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08syms= =3D[0x4+0x683e0-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08= /=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08+0x4+0x7f9f6|=08/=08-=08\=08|= =08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08= \=08|=08/=08-=08\=08|=08/=08-=08\=08]=0D > OK load lbo=08 =08=08 =08=08 =08/book=08 =08t/kernel12/acpi.ko=0D > |=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/boot= /kernel12/acpi.ko text=3D0x43988 /=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\= =08|=08/=08-=08\=08|=08/=08data=3D0x23e0+0xff0 -=08\=08syms=3D[0x4+0x7bb0|= =08+0x4+0xa82b/=08-=08\=08]=0D > OK boot -v=0D > |=08/=08-=08\=08|=08/=08-=08GDB: no debug ports present=0D > KDB: debugger backends: ddb=0D > KDB: current backend: ddb=0D > SMAP type=3D01 base=3D0000000000000000 len=3D000000000009b800=0D > SMAP type=3D02 base=3D000000000009b800 len=3D0000000000004800=0D > SMAP type=3D02 base=3D00000000000c2000 len=3D000000000000e000=0D > SMAP type=3D02 base=3D00000000000dc000 len=3D0000000000024000=0D > SMAP type=3D01 base=3D0000000000100000 len=3D000000003fe00000=0D > SMAP type=3D03 base=3D000000003ff00000 len=3D0000000000013000=0D > SMAP type=3D04 base=3D000000003ff13000 len=3D000000000006d000=0D > SMAP type=3D02 base=3D000000003ff80000 len=3D0000000000080000=0D > SMAP type=3D02 base=3D00000000e0000000 len=3D0000000010000000=0D > SMAP type=3D02 base=3D00000000fec00000 len=3D0000000000010000=0D > SMAP type=3D02 base=3D00000000fffe0000 len=3D0000000000020000=0D > Copyright (c) 1992-2006 The FreeBSD Project.=0D > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994= =0D > The Regents of the University of California. All rights reserved.=0D > FreeBSD 7.0-CURRENT-SNAP012 #0: Tue Jan 31 04:19:59 UTC 2006=0D > root@harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC=0D > WARNING: WITNESS option enabled, expect reduced performance.=0D > Using 16 colors for the VM-PQ tuning (512, 8)=0D > Preloaded elf kernel "/boot/kernel12/kernel" at 0xc0b1d000.=0D > Preloaded elf module "/boot/kernel12/acpi.ko" at 0xc0b1d1c0.=0D > Calibrating clock(s) ... i8254 clock: 1193213 Hz=0D > CLK_USE_I8254_CALIBRATION not specified - using default frequency=0D > Timecounter "i8254" frequency 1193182 Hz quality 0=0D > Calibrating TSC clock ... TSC clock: 2200098427 Hz=0D > CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ (2200.10-MHz 686-clas= s CPU)=0D > Origin =3D "AuthenticAMD" Id =3D 0x20fb1 Stepping =3D 1=0D > Features=3D0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,= PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>=0D > Features2=3D0x1<SSE3>=0D > AMD Features=3D0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow+,3DNow>=0D > AMD Features2=3D0x3<LAHF,CMP>=0D > HTT bit cleared - FreeBSD does not have licensing issues requiring it.=0D > =0D > Cores per package: 2=0D > Data TLB: 32 entries, fully associative=0D > Instruction TLB: 32 entries, fully associative=0D > L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative=0D > L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associ= ative=0D > L2 internal cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 8-way associat= ive=0D > real memory =3D 1072693248 (1023 MB)=0D > Physical memory chunk(s):=0D > 0x0000000000001000 - 0x000000000009afff, 630784 bytes (154 pages)=0D > 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)=0D > 0x0000000000c28000 - 0x000000003eccbfff, 1040859136 bytes (254116 pages)= =0D > avail memory =3D 1040576512 (992 MB)=0D > MP Configuration Table version 1.4 found at 0xc009bd71=0D > Table 'FACP' at 0x3ff12d1c=0D > Table 'SSDT' at 0x3ff12d90=0D > Table 'APIC' at 0x3ff12f5a=0D > MADT: Found table at 0x3ff12f5a=0D > APIC: Using the MADT enumerator.=0D > MADT: Found CPU APIC ID 0 ACPI ID 0: enabled=0D > SMP: Added CPU 0 (AP)=0D > MADT: Found CPU APIC ID 1 ACPI ID 1: enabled=0D > SMP: Added CPU 1 (AP)=0D > ACPI APIC Table: <PTLTD APIC >=0D > APIC ID: physical 0, logical 0:0=0D > APIC ID: physical 1, logical 0:1=0D > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs=0D > cpu0 (BSP): APIC ID: 0=0D > cpu1 (AP): APIC ID: 1=0D > bios32: Found BIOS32 Service Directory header at 0xc00f71e0=0D > bios32: Entry =3D 0xfd640 (c00fd640) Rev =3D 0 Len =3D 1=0D > pcibios: PCI BIOS entry at 0xfd640+0x16e=0D > pnpbios: Found PnP BIOS data at 0xc00f7280=0D > pnpbios: Entry =3D f0000:b596 Rev =3D 1.0=0D > Other BIOS signatures found:=0D > APIC: CPU 0 has ACPI ID 0=0D > APIC: CPU 1 has ACPI ID 1=0D > MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000=0D > ioapic0: Routing external 8259A's -> intpin 0=0D > ioapic0: intpin 0 -> ExtINT (edge, high)=0D > ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)=0D > ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)=0D > ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)=0D > ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)=0D > ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)=0D > ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)=0D > ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)=0D > ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)=0D > ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)=0D > ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)=0D > ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)=0D > ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)=0D > ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)=0D > ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)=0D > ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)=0D > ioapic0: intpin 16 -> PCI IRQ 16 (level, low)=0D > ioapic0: intpin 17 -> PCI IRQ 17 (level, low)=0D > ioapic0: intpin 18 -> PCI IRQ 18 (level, low)=0D > ioapic0: intpin 19 -> PCI IRQ 19 (level, low)=0D > ioapic0: intpin 20 -> PCI IRQ 20 (level, low)=0D > ioapic0: intpin 21 -> PCI IRQ 21 (level, low)=0D > ioapic0: intpin 22 -> PCI IRQ 22 (level, low)=0D > ioapic0: intpin 23 -> PCI IRQ 23 (level, low)=0D > MADT: Found IO APIC ID 3, Interrupt 24 at 0xfecc0000=0D > ioapic1: intpin 0 -> PCI IRQ 24 (level, low)=0D > ioapic1: intpin 1 -> PCI IRQ 25 (level, low)=0D > ioapic1: intpin 2 -> PCI IRQ 26 (level, low)=0D > ioapic1: intpin 3 -> PCI IRQ 27 (level, low)=0D > ioapic1: intpin 4 -> PCI IRQ 28 (level, low)=0D > ioapic1: intpin 5 -> PCI IRQ 29 (level, low)=0D > ioapic1: intpin 6 -> PCI IRQ 30 (level, low)=0D > ioapic1: intpin 7 -> PCI IRQ 31 (level, low)=0D > ioapic1: intpin 8 -> PCI IRQ 32 (level, low)=0D > ioapic1: intpin 9 -> PCI IRQ 33 (level, low)=0D > ioapic1: intpin 10 -> PCI IRQ 34 (level, low)=0D > ioapic1: intpin 11 -> PCI IRQ 35 (level, low)=0D > ioapic1: intpin 12 -> PCI IRQ 36 (level, low)=0D > ioapic1: intpin 13 -> PCI IRQ 37 (level, low)=0D > ioapic1: intpin 14 -> PCI IRQ 38 (level, low)=0D > ioapic1: intpin 15 -> PCI IRQ 39 (level, low)=0D > ioapic1: intpin 16 -> PCI IRQ 40 (level, low)=0D > ioapic1: intpin 17 -> PCI IRQ 41 (level, low)=0D > ioapic1: intpin 18 -> PCI IRQ 42 (level, low)=0D > ioapic1: intpin 19 -> PCI IRQ 43 (level, low)=0D > ioapic1: intpin 20 -> PCI IRQ 44 (level, low)=0D > ioapic1: intpin 21 -> PCI IRQ 45 (level, low)=0D > ioapic1: intpin 22 -> PCI IRQ 46 (level, low)=0D > ioapic1: intpin 23 -> PCI IRQ 47 (level, low)=0D > MADT: Interrupt override: source 0, irq 2=0D > ioapic0: Routing IRQ 0 -> intpin 2=0D > ioapic0: intpin 2 trigger: edge=0D > ioapic0: intpin 2 polarity: high=0D > lapic0: Routing NMI -> LINT1=0D > lapic0: LINT1 trigger: edge=0D > lapic0: LINT1 polarity: high=0D > lapic1: Routing NMI -> LINT1=0D > lapic1: LINT1 trigger: edge=0D > lapic1: LINT1 polarity: high=0D > MADT: Forcing active-low polarity and level trigger for SCI=0D > ioapic0: intpin 10 polarity: low=0D > ioapic0: intpin 10 trigger: level=0D > ioapic0 <Version 0.3> irqs 0-23 on motherboard=0D > ioapic1 <Version 0.3> irqs 24-47 on motherboard=0D > cpu0 BSP:=0D > ID: 0x00000000 VER: 0x00040010 LDR: 0x01000000 DFR: 0x0fffffff=0D > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff=0D > timer: 0x000100ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000=0D > wlan: <802.11 Link Layer>=0D > random: <entropy source, Software, Yarrow>=0D > nfslock: pseudo-device=0D > io: <I/O>=0D > mem: <memory>=0D > Pentium Pro MTRR support enabled=0D > null: <null device, zero device>=0D > ioapic0: routing intpin 13 (ISA IRQ 13) to vector 48=0D > npx0: [FAST]=0D > npx0: <math processor> on motherboard=0D > npx0: INT 16 interface=0D > acpi0: <PTLTD RSDT> on motherboard=0D > ioapic0: routing intpin 10 (ISA IRQ 10) to vector 49=0D > acpi0: [MPSAFE]=0D > ACPI-0448: *** Error: Looking up [\_SB_.PCI0.PIB_.LNKH] in namespace,= AE_NOT_FOUND=0D > SearchNode 0xc4ab6700 StartNode 0xc4ab6700 ReturnNode 0=0D > ACPI-0448: *** Error: Looking up [\_SB_.PCI0.LNKH] in namespace, AE_N= OT_FOUND=0D > SearchNode 0xc4b1dca0 StartNode 0xc4b1dca0 ReturnNode 0=0D > ACPI-0448: *** Error: Looking up [\_SB_.PCI0.LNKH] in namespace, AE_N= OT_FOUND=0D > SearchNode 0xc4b1d860 StartNode 0xc4b1d860 ReturnNode 0=0D > ACPI-0448: *** Error: Looking up [\_SB_.PCI0.LNKH] in namespace, AE_N= OT_FOUND=0D > SearchNode 0xc4b1d700 StartNode 0xc4b1d700 ReturnNode 0=0D > pci_open(1): mode 1 addr port (0x0cf8) is 0x80007820=0D > pci_open(1a): mode1res=3D0x80000000 (0x80000000)=0D > pci_cfgcheck: device 0 [class=3D060000] [hdr=3D80] is there (id=3D0238110= 6)=0D > pcibios: BIOS version 2.10=0D > Found $PIR table, 12 entries at 0xc00fdf00=0D > PCI-Only Interrupts: none=0D > Location Bus Device Pin Link IRQs=0D > embedded 0 5 A 0x03 11=0D > embedded 0 6 A 0x05 11=0D > embedded 0 10 A 0x02 11=0D > embedded 0 9 A 0x07 11=0D > embedded 0 8 A 0x04 11=0D > embedded 0 0 A 0x01 3 4 5 6 7 9 10 11 12 14 15=0D > embedded 0 0 B 0x02 3 4 5 6 7 9 10 11 12 14 15=0D > embedded 0 0 C 0x03 3 4 5 6 7 9 10 11 12 14 15=0D > embedded 0 0 D 0x05 3 4 5 6 7 9 10 11 12 14 15=0D > embedded 0 17 A 0x01 11=0D > embedded 0 17 B 0x02 11=0D > embedded 0 17 C 0x03 11=0D > embedded 0 17 D 0x05 11=0D > embedded 0 16 A 0x01 11=0D > embedded 0 16 B 0x02 11=0D > embedded 0 16 C 0x03 11=0D > embedded 0 16 D 0x05 11=0D > embedded 0 15 A 0x01 11=0D > embedded 0 15 B 0x02 11=0D > embedded 0 1 A 0x01 11=0D > embedded 0 1 B 0x02 11=0D > embedded 0 1 C 0x03 11=0D > embedded 0 1 D 0x05 11=0D > embedded 0 2 A 0x09 3 4 6 9 10 11 12 14 15=0D > embedded 0 2 B 0x09 3 4 6 9 10 11 12 14 15=0D > embedded 0 2 C 0x09 3 4 6 9 10 11 12 14 15=0D > embedded 0 2 D 0x09 3 4 6 9 10 11 12 14 15=0D > embedded 0 3 A 0x09 3 4 6 9 10 11 12 14 15=0D > embedded 0 3 B 0x09 3 4 6 9 10 11 12 14 15=0D > embedded 0 3 C 0x09 3 4 6 9 10 11 12 14 15=0D > embedded 0 3 D 0x09 3 4 6 9 10 11 12 14 15=0D > AcpiOsDerivePciId: bus 0 dev 17 func 0=0D > AcpiOsDerivePciId: bus 3 dev 0 func 0=0D > AcpiOsDerivePciId: bus 4 dev 0 func 0=0D > AcpiOsDerivePciId: bus 0 dev 0 func 3=0D > pci_link0: Links after initial probe:=0D > Index IRQ Rtd Ref IRQs=0D > 0 11 N 0 16 17 18 19 20 21 22 23=0D > pci_link0: Links after initial validation:=0D > Index IRQ Rtd Ref IRQs=0D > 0 255 N 0 16 17 18 19 20 21 22 23=0D > pci_link0: Links after disable:=0D > Index IRQ Rtd Ref IRQs=0D > 0 255 N 0 16 17 18 19 20 21 22 23=0D > pci_link1: Links after initial probe:=0D > Index IRQ Rtd Ref IRQs=0D > 0 11 N 0 16 17 18 19 20 21 22 23=0D > pci_link1: Links after initial validation:=0D > Index IRQ Rtd Ref IRQs=0D > 0 255 N 0 16 17 18 19 20 21 22 23=0D > pci_link1: Links after disable:=0D > Index IRQ Rtd Ref IRQs=0D > 0 255 N 0 16 17 18 19 20 21 22 23=0D > pci_link2: Links after initial probe:=0D > Index IRQ Rtd Ref IRQs=0D > 0 11 N 0 22=0D > pci_link2: Links after initial validation:=0D > Index IRQ Rtd Ref IRQs=0D > 0 255 N 0 22=0D > pci_link2: Links after disable:=0D > Index IRQ Rtd Ref IRQs=0D > 0 255 N 0 22=0D > pci_link3: Links after initial probe:=0D > Index IRQ Rtd Ref IRQs=0D > 0 11 N 0 21=0D > pci_link3: Links after initial validation:=0D > Index IRQ Rtd Ref IRQs=0D > 0 255 N 0 21=0D > pci_link3: Links after disable:=0D > Index IRQ Rtd Ref IRQs=0D > 0 255 N 0 21=0D > pci_link4: Links after initial probe:=0D > Index IRQ Rtd Ref IRQs=0D > 0 11 N 0 11=0D > pci_link4: Links after initial validation:=0D > Index IRQ Rtd Ref IRQs=0D > 0 11 N 0 11=0D > pci_link4: Links after disable:=0D > Index IRQ Rtd Ref IRQs=0D > 0 255 N 0 11=0D > pci_link5: Links after initial probe:=0D > Index IRQ Rtd Ref IRQs=0D > 0 11 N 0 11=0D > pci_link5: Links after initial validation:=0D > Index IRQ Rtd Ref IRQs=0D > 0 11 N 0 11=0D > pci_link5: Links after disable:=0D > Index IRQ Rtd Ref IRQs=0D > 0 255 N 0 11=0D > pci_link6: Links after initial probe:=0D > Index IRQ Rtd Ref IRQs=0D > 0 11 N 0 11=0D > pci_link6: Links after initial validation:=0D > Index IRQ Rtd Ref IRQs=0D > 0 11 N 0 11=0D > pci_link6: Links after disable:=0D > Index IRQ Rtd Ref IRQs=0D > 0 255 N 0 11=0D > pci_link7: Links after initial probe:=0D > Index IRQ Rtd Ref IRQs=0D > 0 11 N 0 11=0D > pci_link7: Links after initial validation:=0D > Index IRQ Rtd Ref IRQs=0D > 0 11 N 0 11=0D > pci_link7: Links after disable:=0D > Index IRQ Rtd Ref IRQs=0D > 0 255 N 0 11=0D > acpi_ec0: <Embedded Controller: GPE 0xb> port 0x62,0x66 on acpi0=0D > ACPI timer: 1/2 1/1 1/2 1/2 1/1 1/1 1/1 1/1 1/1 1/1 -> 10=0D > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000=0D > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0=0D > cpu0: <ACPI CPU> on acpi0=0D > cpu1: <ACPI CPU> on acpi0=0D > acpi_button0: <Power Button> on acpi0=0D > acpi_acad0: <AC Adapter> on acpi0=0D > battery0: <ACPI Control Method Battery> on acpi0=0D > acpi_lid0: <Control Method Lid Switch> on acpi0=0D > acpi_button1: <Sleep Button> on acpi0=0D > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0=0D > pci0: <ACPI PCI bus> on pcib0=0D > pci0: physical bus=3D0=0D > found-> vendor=3D0x1106, dev=3D0x0238, revid=3D0x00=0D > bus=3D0, slot=3D0, func=3D0=0D > class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1=0D > cmdreg=3D0x0006, statreg=3D0xa230, cachelnsz=3D0 (dwords)=0D > lattimer=3D0x10 (480 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0D > powerspec 2 supports D0 D3 current D0=0D > map[10]: type 3, range 32, base b0000000, size 28, enabled=0D > found-> vendor=3D0x1106, dev=3D0x1238, revid=3D0x00=0D > bus=3D0, slot=3D0, func=3D1=0D > class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0=0D > cmdreg=3D0x0006, statreg=3D0x0200, cachelnsz=3D0 (dwords)=0D > lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0D > found-> vendor=3D0x1106, dev=3D0x2238, revid=3D0x00=0D > bus=3D0, slot=3D0, func=3D2=0D > class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0=0D > cmdreg=3D0x0006, statreg=3D0x0200, cachelnsz=3D0 (dwords)=0D > lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0D > found-> vendor=3D0x1106, dev=3D0x3238, revid=3D0x00=0D > bus=3D0, slot=3D0, func=3D3=0D > class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0=0D > cmdreg=3D0x0006, statreg=3D0x0200, cachelnsz=3D0 (dwords)=0D > lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0D > found-> vendor=3D0x1106, dev=3D0x4238, revid=3D0x00=0D > bus=3D0, slot=3D0, func=3D4=0D > class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0=0D > cmdreg=3D0x0006, statreg=3D0x0200, cachelnsz=3D0 (dwords)=0D > lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0D > found-> vendor=3D0x1106, dev=3D0x5238, revid=3D0x00=0D > bus=3D0, slot=3D0, func=3D5=0D > class=3D08-00-20, hdrtype=3D0x00, mfdev=3D1=0D > cmdreg=3D0x0006, statreg=3D0x0000, cachelnsz=3D0 (dwords)=0D > lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0D > found-> vendor=3D0x1106, dev=3D0x7238, revid=3D0x00=0D > bus=3D0, slot=3D0, func=3D7=0D > class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0=0D > cmdreg=3D0x0006, statreg=3D0x0200, cachelnsz=3D0 (dwords)=0D > lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0D > found-> vendor=3D0x1106, dev=3D0xb188, revid=3D0x00=0D > bus=3D0, slot=3D1, func=3D0=0D > class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0=0D > cmdreg=3D0x0007, statreg=3D0x0230, cachelnsz=3D0 (dwords)=0D > lattimer=3D0x00 (0 ns), mingnt=3D0x04 (1000 ns), maxlat=3D0x00 (0 ns)=0D > found-> vendor=3D0x1106, dev=3D0xa238, revid=3D0x00=0D > bus=3D0, slot=3D2, func=3D0=0D > class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0=0D > cmdreg=3D0x0007, statreg=3D0x0010, cachelnsz=3D0 (dwords)=0D > lattimer=3D0x00 (0 ns), mingnt=3D0x0e (3500 ns), maxlat=3D0x00 (0 ns)=0D > intpin=3Da, irq=3D9=0D > pcib0: matched entry for 0.2.INTA=0D > pcib0: slot 2 INTA hardwired to IRQ 27=0D > found-> vendor=3D0x1106, dev=3D0xc238, revid=3D0x00=0D > bus=3D0, slot=3D3, func=3D0=0D > class=3D06-04-00, hdrtype=3D0x01, mfdev=3D1=0D > cmdreg=3D0x0000, statreg=3D0x0010, cachelnsz=3D0 (dwords)=0D > lattimer=3D0x00 (0 ns), mingnt=3D0x04 (1000 ns), maxlat=3D0x00 (0 ns)=0D > intpin=3Da, irq=3D9=0D > pcib0: matched entry for 0.3.INTA=0D > pcib0: slot 3 INTA hardwired to IRQ 31=0D > found-> vendor=3D0x1106, dev=3D0xe238, revid=3D0x00=0D > bus=3D0, slot=3D3, func=3D2=0D > class=3D06-04-00, hdrtype=3D0x01, mfdev=3D1=0D > cmdreg=3D0x0000, statreg=3D0x0010, cachelnsz=3D0 (dwords)=0D > lattimer=3D0x00 (0 ns), mingnt=3D0x04 (1000 ns), maxlat=3D0x00 (0 ns)=0D > intpin=3Dc, irq=3D9=0D > pcib0: matched entry for 0.3.INTC=0D > pcib0: slot 3 INTC hardwired to IRQ 31=0D > found-> vendor=3D0x104c, dev=3D0xac50, revid=3D0x02=0D > bus=3D0, slot=3D5, func=3D0=0D > class=3D06-07-00, hdrtype=3D0x02, mfdev=3D0=0D > cmdreg=3D0x0007, statreg=3D0x0210, cachelnsz=3D0 (dwords)=0D > lattimer=3D0x40 (1920 ns), mingnt=3D0x40 (16000 ns), maxlat=3D0x07 (1750= ns)=0D > intpin=3Da, irq=3D18=0D > powerspec 1 supports D0 D1 D2 D3 current D0=0D > map[10]: type 1, range 32, base 80000000, size 12, enabled=0D > pcib0: matched entry for 0.5.INTA=0D > pcib0: slot 5 INTA hardwired to IRQ 18=0D > found-> vendor=3D0x104c, dev=3D0x8023, revid=3D0x00=0D > bus=3D0, slot=3D6, func=3D0=0D > class=3D0c-00-10, hdrtype=3D0x00, mfdev=3D0=0D > cmdreg=3D0x0012, statreg=3D0x0210, cachelnsz=3D16 (dwords)=0D > lattimer=3D0x40 (1920 ns), mingnt=3D0x02 (500 ns), maxlat=3D0x04 (1000 n= s)=0D > intpin=3Da, irq=3D11=0D > powerspec 2 supports D0 D1 D2 D3 current D0=0D > map[10]: type 1, range 32, base d2206000, size 11, enabled=0D > map[14]: type 1, range 32, base d2200000, size 14, enabled=0D > pcib0: matched entry for 0.6.INTA=0D > pcib0: slot 6 INTA hardwired to IRQ 20=0D > found-> vendor=3D0x10ec, dev=3D0x8169, revid=3D0x10=0D > bus=3D0, slot=3D8, func=3D0=0D > class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0=0D > cmdreg=3D0x0017, statreg=3D0x02b8, cachelnsz=3D16 (dwords)=0D > lattimer=3D0x40 (1920 ns), mingnt=3D0x20 (8000 ns), maxlat=3D0x40 (16000= ns)=0D > intpin=3Da, irq=3D11=0D > powerspec 2 supports D0 D1 D2 D3 current D0=0D > map[10]: type 4, range 32, base 00001000, size 8, enabled=0D > map[14]: type 1, range 32, base d2206800, size 8, enabled=0D > pcib0: matched entry for 0.8.INTA=0D > pcib0: slot 8 INTA hardwired to IRQ 19=0D > found-> vendor=3D0x1814, dev=3D0x0201, revid=3D0x01=0D > bus=3D0, slot=3D10, func=3D0=0D > class=3D02-80-00, hdrtype=3D0x00, mfdev=3D0=0D > cmdreg=3D0x0013, statreg=3D0x0410, cachelnsz=3D16 (dwords)=0D > lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0D > intpin=3Da, irq=3D11=0D > powerspec 2 supports D0 D3 current D0=0D > map[10]: type 1, range 32, base d2204000, size 13, enabled=0D > pcib0: matched entry for 0.10.INTA=0D > pcib0: slot 10 INTA hardwired to IRQ 17=0D > found-> vendor=3D0x1106, dev=3D0x3149, revid=3D0x80=0D > bus=3D0, slot=3D15, func=3D0=0D > class=3D01-01-8f, hdrtype=3D0x00, mfdev=3D1=0D > cmdreg=3D0x0005, statreg=3D0x0290, cachelnsz=3D0 (dwords)=0D > lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0D > intpin=3Db, irq=3D11=0D > powerspec 2 supports D0 D3 current D0=0D > map[10]: type 4, range 32, base 000020b0, size 3, enabled=0D > map[14]: type 4, range 32, base 000020a4, size 2, enabled=0D > map[18]: type 4, range 32, base 000020a8, size 3, enabled=0D > map[1c]: type 4, range 32, base 000020a0, size 2, enabled=0D > map[20]: type 4, range 32, base 00002080, size 4, enabled=0D > map[24]: type 4, range 32, base 00001400, size 8, enabled=0D > pcib0: matched entry for 0.15.INTB=0D > pcib0: slot 15 INTB hardwired to IRQ 20=0D > found-> vendor=3D0x1106, dev=3D0x0571, revid=3D0x06=0D > bus=3D0, slot=3D15, func=3D1=0D > class=3D01-01-8a, hdrtype=3D0x00, mfdev=3D0=0D > cmdreg=3D0x0007, statreg=3D0x0290, cachelnsz=3D0 (dwords)=0D > lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0D > intpin=3Da, irq=3D255=0D > powerspec 2 supports D0 D3 current D0=0D > map[20]: type 4, range 32, base 00002090, size 4, enabled=0D > found-> vendor=3D0x1106, dev=3D0x3038, revid=3D0x81=0D > bus=3D0, slot=3D16, func=3D0=0D > class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1=0D > cmdreg=3D0x0017, statreg=3D0x0210, cachelnsz=3D16 (dwords)=0D > lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0D > intpin=3Da, irq=3D11=0D > powerspec 2 supports D0 D1 D2 D3 current D0=0D > map[20]: type 4, range 32, base 00002000, size 5, enabled=0D > pcib0: matched entry for 0.16.INTA (src \_SB_.PCI0.PIB_.ALKD:0)=0D > pci_link3: Picked IRQ 21 with weight 0=0D > pcib0: slot 16 INTA routed to irq 21 via \_SB_.PCI0.PIB_.ALKD=0D > found-> vendor=3D0x1106, dev=3D0x3038, revid=3D0x81=0D > bus=3D0, slot=3D16, func=3D1=0D > class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1=0D > cmdreg=3D0x0017, statreg=3D0x0210, cachelnsz=3D16 (dwords)=0D > lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0D > intpin=3Da, irq=3D11=0D > powerspec 2 supports D0 D1 D2 D3 current D0=0D > map[20]: type 4, range 32, base 00002020, size 5, enabled=0D > pcib0: matched entry for 0.16.INTA (src \_SB_.PCI0.PIB_.ALKD:0)=0D > pcib0: slot 16 INTA routed to irq 21 via \_SB_.PCI0.PIB_.ALKD=0D > found-> vendor=3D0x1106, dev=3D0x3038, revid=3D0x81=0D > bus=3D0, slot=3D16, func=3D2=0D > class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1=0D > cmdreg=3D0x0017, statreg=3D0x0210, cachelnsz=3D16 (dwords)=0D > lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0D > intpin=3Db, irq=3D11=0D > powerspec 2 supports D0 D1 D2 D3 current D0=0D > map[20]: type 4, range 32, base 00002040, size 5, enabled=0D > pcib0: matched entry for 0.16.INTB (src \_SB_.PCI0.PIB_.ALKD:0)=0D > pcib0: slot 16 INTB routed to irq 21 via \_SB_.PCI0.PIB_.ALKD=0D > found-> vendor=3D0x1106, dev=3D0x3038, revid=3D0x81=0D > bus=3D0, slot=3D16, func=3D3=0D > class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1=0D > cmdreg=3D0x0017, statreg=3D0x0210, cachelnsz=3D16 (dwords)=0D > lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0D > intpin=3Db, irq=3D11=0D > powerspec 2 supports D0 D1 D2 D3 current D0=0D > map[20]: type 4, range 32, base 00002060, size 5, enabled=0D > pcib0: matched entry for 0.16.INTB (src \_SB_.PCI0.PIB_.ALKD:0)=0D > pcib0: slot 16 INTB routed to irq 21 via \_SB_.PCI0.PIB_.ALKD=0D > found-> vendor=3D0x1106, dev=3D0x3104, revid=3D0x86=0D > bus=3D0, slot=3D16, func=3D4=0D > class=3D0c-03-20, hdrtype=3D0x00, mfdev=3D1=0D > cmdreg=3D0x0013, statreg=3D0x0210, cachelnsz=3D16 (dwords)=0D > lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0D > intpin=3Dc, irq=3D11=0D > powerspec 2 supports D0 D1 D2 D3 current D0=0D > map[10]: type 1, range 32, base d2206c00, size 8, enabled=0D > pcib0: matched entry for 0.16.INTC (src \_SB_.PCI0.PIB_.ALKD:0)=0D > pcib0: slot 16 INTC routed to irq 21 via \_SB_.PCI0.PIB_.ALKD=0D > found-> vendor=3D0x1106, dev=3D0x3227, revid=3D0x00=0D > bus=3D0, slot=3D17, func=3D0=0D > class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1=0D > cmdreg=3D0x0087, statreg=3D0x0210, cachelnsz=3D0 (dwords)=0D > lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0D > powerspec 2 supports D0 D3 current D0=0D > found-> vendor=3D0x1106, dev=3D0x3059, revid=3D0x60=0D > bus=3D0, slot=3D17, func=3D5=0D > class=3D04-01-00, hdrtype=3D0x00, mfdev=3D0=0D > cmdreg=3D0x0001, statreg=3D0x0210, cachelnsz=3D0 (dwords)=0D > lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0D > intpin=3Dc, irq=3D11=0D > powerspec 2 supports D0 D1 D2 D3 current D0=0D > map[10]: type 4, range 32, base 00001800, size 8, enabled=0D > pcib0: matched entry for 0.17.INTC (src \_SB_.PCI0.PIB_.ALKC:0)=0D > pci_link2: Picked IRQ 22 with weight 0=0D > pcib0: slot 17 INTC routed to irq 22 via \_SB_.PCI0.PIB_.ALKC=0D > found-> vendor=3D0x1106, dev=3D0x3068, revid=3D0x80=0D > bus=3D0, slot=3D17, func=3D6=0D > class=3D07-80-00, hdrtype=3D0x00, mfdev=3D0=0D > cmdreg=3D0x0001, statreg=3D0x0210, cachelnsz=3D0 (dwords)=0D > lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0D > intpin=3Dc, irq=3D11=0D > powerspec 2 supports D0 D3 current D0=0D > map[10]: type 4, range 32, base 00001c00, size 8, enabled=0D > pcib0: matched entry for 0.17.INTC (src \_SB_.PCI0.PIB_.ALKC:0)=0D > pcib0: slot 17 INTC routed to irq 22 via \_SB_.PCI0.PIB_.ALKC=0D > found-> vendor=3D0x1022, dev=3D0x1100, revid=3D0x00=0D > bus=3D0, slot=3D24, func=3D0=0D > class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1=0D > cmdreg=3D0x0000, statreg=3D0x0010, cachelnsz=3D0 (dwords)=0D > lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0D > found-> vendor=3D0x1022, dev=3D0x1101, revid=3D0x00=0D > bus=3D0, slot=3D24, func=3D1=0D > class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1=0D > cmdreg=3D0x0000, statreg=3D0x0000, cachelnsz=3D0 (dwords)=0D > lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0D > found-> vendor=3D0x1022, dev=3D0x1102, revid=3D0x00=0D > bus=3D0, slot=3D24, func=3D2=0D > class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1=0D > cmdreg=3D0x0000, statreg=3D0x0000, cachelnsz=3D0 (dwords)=0D > lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0D > found-> vendor=3D0x1022, dev=3D0x1103, revid=3D0x00=0D > bus=3D0, slot=3D24, func=3D3=0D > class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1=0D > cmdreg=3D0x0000, statreg=3D0x0000, cachelnsz=3D0 (dwords)=0D > lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0D > agp0: <VIA 3238 host to PCI bridge> on hostb0=0D > agp0: 1 Miscellaneous Control unit(s) found.=0D > agp0: Aperture Base[0]: 0x00000058=0D > hostb0: Reserved 0x10000000 bytes for rid 0x10 type 3 at 0xb0000000=0D > agp0: allocating GATT for aperture of size 256M=0D > pci0: <base peripheral, interrupt controller> at device 0.5 (no driver at= tached)=0D > pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0=0D > pcib1: secondary bus 1=0D > pcib1: subordinate bus 1=0D > pcib1: I/O decode 0xf000-0xfff=0D > pcib1: memory decode 0xfff00000-0xfffff=0D > pcib1: prefetched decode 0xfff00000-0xfffff=0D > pcib1: could not get PCI interrupt routing table for \_SB_.PCI0.PPB_ - AE= _NOT_FOUND=0D > pci1: <ACPI PCI bus> on pcib1=0D > pci1: physical bus=3D1=0D > pcib2: <ACPI PCI-PCI bridge> irq 27 at device 2.0 on pci0=0D > pcib2: secondary bus 2=0D > pcib2: subordinate bus 2=0D > pcib2: I/O decode 0x5000-0x5fff=0D > pcib2: memory decode 0xd0000000-0xd1ffffff=0D > pcib2: prefetched decode 0xc0000000-0xcfffffff=0D > pci2: <ACPI PCI bus> on pcib2=0D > pci2: physical bus=3D2=0D > found-> vendor=3D0x10de, dev=3D0x0099, revid=3D0xa1=0D > bus=3D2, slot=3D0, func=3D0=0D > class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0=0D > cmdreg=3D0x0003, statreg=3D0x0010, cachelnsz=3D16 (dwords)=0D > lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0D > intpin=3Da, irq=3D9=0D > powerspec 2 supports D0 D3 current D0=0D > MSI supports 1 message, 64 bit=0D > map[10]: type 1, range 32, base d1000000, size 24, enabled=0D > pcib2: (null) requested memory range 0xd1000000-0xd1ffffff: good=0D > map[14]: type 3, range 64, base c0000000, size 28, enabled=0D > pcib2: (null) requested memory range 0xc0000000-0xcfffffff: good=0D > map[1c]: type 1, range 64, base d0000000, size 24, enabled=0D > pcib2: (null) requested memory range 0xd0000000-0xd0ffffff: good=0D > map[24]: type 4, range 32, base 00005000, size 7, enabled=0D > pcib2: (null) requested I/O range 0x5000-0x507f: in range=0D > pcib2: matched entry for 2.0.INTA=0D > pcib2: slot 0 INTA hardwired to IRQ 24=0D > vgapci0: <VGA-compatible display> port 0x5000-0x507f mem 0xd1000000-0xd1f= fffff,0xc0000000-0xcfffffff,0xd0000000-0xd0ffffff irq 24 at device 0.0 on p= ci2=0D > pcib3: <ACPI PCI-PCI bridge> irq 31 at device 3.0 on pci0=0D > pcib3: secondary bus 3=0D > pcib3: subordinate bus 3=0D > pcib3: I/O decode 0x0-0x0=0D > pcib3: memory decode 0x0-0x0=0D > pcib3: prefetched decode 0x0-0x0=0D > pci3: <ACPI PCI bus> on pcib3=0D > pci3: physical bus=3D3=0D > pcib4: <ACPI PCI-PCI bridge> irq 31 at device 3.2 on pci0=0D > pcib4: secondary bus 4=0D > pcib4: subordinate bus 4=0D > pcib4: I/O decode 0x0-0x0=0D > pcib4: memory decode 0x0-0x0=0D > pcib4: prefetched decode 0x0-0x0=0D > pci4: <ACPI PCI bus> on pcib4=0D > pci4: physical bus=3D4=0D > cbb0: <TI1410 PCI-CardBus Bridge> mem 0x80000000-0x80000fff irq 18 at dev= ice 5.0 on pci0=0D > cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x80000000=0D > cardbus0: <CardBus bus> on cbb0=0D > pccard0: <16-bit PCCard bus> on cbb0=0D > ioapic0: routing intpin 18 (PCI IRQ 18) to vector 50=0D > cbb0: [MPSAFE]=0D > cbb0: PCI Configuration space:=0D > 0x00: 0xac50104c 0x02100007 0x06070002 0x00024000 =0D > 0x10: 0x80000000 0x020000a0 0x20030200 0xfffff000 =0D > 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc =0D > 0x30: 0x00000000 0xfffffffc 0x00000000 0x07400112 =0D > 0x40: 0x09011558 0x00000001 0x00000000 0x00000000 =0D > 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 =0D > 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 =0D > 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 =0D > 0x80: 0x0044d061 0x00000000 0x00000000 0x00001002 =0D > 0x90: 0x616402c0 0x00000000 0x00000000 0x00000000 =0D > 0xa0: 0xfe110001 0x00c00000 0x00000000 0x0000001f =0D > 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 =0D > 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 =0D > 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 =0D > 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 =0D > 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 =0D > fwohci0: <Texas Instruments TSB43AB22/A> mem 0xd2206000-0xd22067ff,0xd220= 0000-0xd2203fff irq 20 at device 6.0 on pci0=0D > fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xd2206000=0D > ioapic0: routing intpin 20 (PCI IRQ 20) to vector 51=0D > fwohci0: [MPSAFE]=0D > fwohci0: OHCI version 1.10 (ROM=3D1)=0D > fwohci0: No. of Isochronous channels is 4.=0D > fwohci0: EUI64 00:90:f5:00:00:48:aa:64=0D > fwohci0: Phy 1394a available S400, 2 ports.=0D > fwohci0: Link S400, max_rec 2048 bytes.=0D > firewire0: <IEEE1394(FireWire) bus> on fwohci0=0D > fwe0: <Ethernet over FireWire> on firewire0=0D > if_fwe0: Fake Ethernet address: 02:90:f5:48:aa:64=0D > fwe0: bpf attached=0D > fwe0: Ethernet address: 02:90:f5:48:aa:64=0D > fwe0: if_start running deferred for Giant=0D > sbp0: <SBP-2/SCSI over FireWire> on firewire0=0D > fwohci0: Initiate bus reset=0D > fwohci0: node_id=3D0xc000ffc0, gen=3D1, CYCLEMASTER mode=0D > firewire0: 1 nodes, maxhop <=3D 0, cable IRM =3D 0 (me)=0D > firewire0: bus manager 0 (me)=0D > re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x1000=0D > re0: <RealTek 8169SB Single-chip Gigabit Ethernet> port 0x1000-0x10ff mem= 0xd2206800-0xd22068ff irq 19 at device 8.0 on pci0=0D > miibus0: <MII bus> on re0=0D > rgephy0: <RTL8169S/8110S media interface> on miibus0=0D > rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 100= 0baseTX-FDX, auto=0D > re0: bpf attached=0D > re0: Ethernet address: 00:90:f5:48:aa:65=0D > ioapic0: routing intpin 19 (PCI IRQ 19) to vector 52=0D > re0: [MPSAFE]=0D > ral0: <Ralink Technology RT2500> mem 0xd2204000-0xd2205fff irq 17 at devi= ce 10.0 on pci0=0D > ral0: Reserved 0x2000 bytes for rid 0x10 type 3 at 0xd2204000=0D > ral0: MAC/BBP RT2560 (rev 0x04), RF RT2525=0D > ral0: bpf attached=0D > ral0: Ethernet address: 00:13:d3:68:28:fd=0D > ral0: bpf attached=0D > ral0: bpf attached=0D > ioapic0: routing intpin 17 (PCI IRQ 17) to vector 53=0D > ral0: [MPSAFE]=0D > ral0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps=0D > ral0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24M= bps 36Mbps 48Mbps 54Mbps=0D > atapci0: <VIA 6420 SATA150 controller> port 0x20b0-0x20b7,0x20a4-0x20a7,0= x20a8-0x20af,0x20a0-0x20a3,0x2080-0x208f,0x1400-0x14ff irq 20 at device 15.= 0 on pci0=0D > atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x2080=0D > atapci0: [MPSAFE]=0D > atapci0: Reserved 0x100 bytes for rid 0x24 type 4 at 0x1400=0D > ata2: <ATA channel 0> on atapci0=0D > atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x20b0=0D > atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0x20a4=0D > ata2: SATA connect ready time=3D0ms=0D > ata2: sata_connect devices=3D0x1<ATA_MASTER>=0D > ata2: [MPSAFE]=0D > ata3: <ATA channel 1> on atapci0=0D > atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x20a8=0D > atapci0: Reserved 0x4 bytes for rid 0x1c type 4 at 0x20a0=0D > ata3: SATA connect status=3D00000000=0D > ata3: [MPSAFE]=0D > atapci1: <VIA 8237 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177= ,0x376,0x2090-0x209f at device 15.1 on pci0=0D > atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x2090=0D > ata0: <ATA channel 0> on atapci1=0D > atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0=0D > atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6=0D > ata0: reset tp1 mask=3D03 ostat0=3D60 ostat1=3D70=0D > ata0: stat0=3D0x20 err=3D0x20 lsb=3D0x20 msb=3D0x20=0D > ata0: stat1=3D0x30 err=3D0x30 lsb=3D0x30 msb=3D0x30=0D > ata0: reset tp2 stat0=3D20 stat1=3D30 devices=3D0x0=0D > ioapic0: routing intpin 14 (ISA IRQ 14) to vector 54=0D > ata0: [MPSAFE]=0D > ata1: <ATA channel 1> on atapci1=0D > atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170=0D > atapci1: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376=0D > ata1: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D00=0D > ata1: stat0=3D0x00 err=3D0x01 lsb=3D0x14 msb=3D0xeb=0D > ata1: stat1=3D0x00 err=3D0x00 lsb=3D0x00 msb=3D0x00=0D > ata1: reset tp2 stat0=3D00 stat1=3D00 devices=3D0x4<ATAPI_MASTER>=0D > ioapic0: routing intpin 15 (ISA IRQ 15) to vector 55=0D > ata1: [MPSAFE]=0D > uhci0: <VIA 83C572 USB controller> port 0x2000-0x201f irq 21 at device 16= .0 on pci0=0D > uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2000=0D > ioapic0: routing intpin 21 (PCI IRQ 21) to vector 56=0D > uhci0: [GIANT-LOCKED]=0D > usb0: <VIA 83C572 USB controller> on uhci0=0D > usb0: USB revision 1.0=0D > uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0D > uhub0: 2 ports with 2 removable, self powered=0D > uhci1: <VIA 83C572 USB controller> port 0x2020-0x203f irq 21 at device 16= .1 on pci0=0D > uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2020=0D > uhci1: [GIANT-LOCKED]=0D > usb1: <VIA 83C572 USB controller> on uhci1=0D > usb1: USB revision 1.0=0D > uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0D > uhub1: 2 ports with 2 removable, self powered=0D > uhci2: <VIA 83C572 USB controller> port 0x2040-0x205f irq 21 at device 16= .2 on pci0=0D > uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2040=0D > uhci2: [GIANT-LOCKED]=0D > usb2: <VIA 83C572 USB controller> on uhci2=0D > usb2: USB revision 1.0=0D > uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0D > uhub2: 2 ports with 2 removable, self powered=0D > uhci3: <VIA 83C572 USB controller> port 0x2060-0x207f irq 21 at device 16= .3 on pci0=0D > uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2060=0D > uhci3: [GIANT-LOCKED]=0D > usb3: <VIA 83C572 USB controller> on uhci3=0D > usb3: USB revision 1.0=0D > uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0D > uhub3: 2 ports with 2 removable, self powered=0D > ehci0: <VIA VT6202 USB 2.0 controller> mem 0xd2206c00-0xd2206cff irq 21 a= t device 16.4 on pci0=0D > ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xd2206c00=0D > ehci0: [GIANT-LOCKED]=0D > ehci0: Dropped interrupts workaround enabled=0D > usb4: EHCI version 1.0=0D > usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3=0D > usb4: <VIA VT6202 USB 2.0 controller> on ehci0=0D > usb4: USB revision 2.0=0D > uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1=0D > uhub4: 8 ports with 8 removable, self powered=0D > =00=00 --=20 Michael W. Lucas mwlucas@FreeBSD.org, mwlucas@BlackHelicopters.org http://www.BlackHelicopters.org/~mwlucas/ "The cloak of anonymity protects me from the nuisance of caring." -Non Sequ= itur
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060208024742.GA78989>