Date: Fri, 25 Dec 2020 03:24:19 +0300 From: Yuri Pankov <yuripv@yuripv.dev> To: junchoon@dec.sakura.ne.jp, freebsd-current@freebsd.org Cc: Marc Veldman <marc@bumblingdork.com> Subject: Re: Boot panic on Lenovo P50s since r367998 Message-ID: <10a15dcd-aad7-736c-63f4-a7bf06c2fa3f@yuripv.dev> In-Reply-To: <20201225090219.d98fa1ce21d600f0da606e29@dec.sakura.ne.jp> References: <89112D93-739D-45B5-B21A-3396C098A89B@bumblingdork.com> <20201225090219.d98fa1ce21d600f0da606e29@dec.sakura.ne.jp>
next in thread | previous in thread | raw e-mail | index | archive | help
Tomoaki AOKI wrote: > On Thu, 24 Dec 2020 10:34:49 +0100 > Marc Veldman <marc@bumblingdork.com> wrote: > >> Hello, >> >> since r367998 my Lenovo P50s panics on boot: >> >> mmc0: detached >> panic: Bad link elm 0xfffff80003a73300 next->prep != elm >> cupid=3 >> time=2 >> KDB: stack backtrace: >> db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xffffffff8299a9c0 >> vpanic() at vpanic+0x181/frame 0xffffffff8299aa10 >> panic() at panic+0x43/frame 0xffffffff8299aa70 >> config_intrhook_disestablish() at config_intrhook_disestablish+0xf3/frame 0xffffffff8299aa90 >> config_intrhook_oneshot_func() at config_intrhook_oneshot_func+0x18/frame 0xffffffff8299aab0 >> run_interrupt_driven_config_hooks() at run_interrupt_driven_config_hooks+0x77/frame 0xffffffff8299aad0 >> boot_run_interrupt_driven_config_hooks() at boot_run_interrupt_driven_config_hooks+0x1f/frame 0xffffffff8299ab60 >> mi_startup() at mi_startup+0xec/frame 0xffffffff8299abb0 >> btext() at btext+0x2c >> KDB: enter: panic >> [thread pid 0 tid 100000] >> Stopped at kdb_enter+0x37: movq $0,0x10ada46(%rip) >> >> If needed, I can test patches >> >> Dmesg (with r367977 kernel) >> >> ---<<BOOT>>--- >> Copyright (c) 1992-2020 The FreeBSD Project. >> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 >> The Regents of the University of California. All rights reserved. >> FreeBSD is a registered trademark of The FreeBSD Foundation. >> FreeBSD 13.0-CURRENT #0 r367997: Tue Dec 22 16:47:30 CET 2020 >> root@devnovo:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64 >> FreeBSD clang version 11.0.0 (git@github.com:llvm/llvm-project.git llvmorg-11.0.0-0-g176249bd673) >> WARNING: WITNESS option enabled, expect reduced performance. >> VT(efifb): resolution 1920x1080 >> CPU: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz (2592.10-MHz K8-class CPU) >> Origin="GenuineIntel" Id=0x406e3 Family=0x6 Model=0x4e Stepping=3 >> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> >> Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> >> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> >> AMD Features2=0x121<LAHF,ABM,Prefetch> >> Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> >> Structured Extended Features3=0x9c000000<IBPB,STIBP,L1DFL,SSBD> >> XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> >> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID >> TSC: P-state invariant, performance statistics >> real memory = 17179869184 (16384 MB) >> avail memory = 16421109760 (15660 MB) >> Event timer "LAPIC" quality 600 >> ACPI APIC Table: <LENOVO TP-N1K > >> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs >> FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads >> random: registering fast source Intel Secure Key RNG >> random: fast provider: "Intel Secure Key RNG" >> random: unblocking device. >> ioapic0 <Version 2.0> irqs 0-119 >> Launching APs: 1 3 2 >> Timecounter "TSC-low" frequency 1296050980 Hz quality 1000 >> random: entropy device external interface >> WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 13.0. >> kbd1 at kbdmux0 >> 000.000045 [4346] netmap_init netmap: loaded module >> [ath_hal] loaded >> nexus0 >> efirtc0: <EFI Realtime Clock> >> efirtc0: registered as a time-of-day clock, resolution 1.000000s >> cryptosoft0: <software crypto> >> aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> >> acpi0: <LENOVO TP-N1K> >> acpi_ec0: <Embedded Controller: GPE 0x16, ECDT> port 0x62,0x66 on acpi0 >> acpi0: Power Button (fixed) >> cpu0: <ACPI CPU> on acpi0 >> attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 >> Timecounter "i8254" frequency 1193182 Hz quality 0 >> Event timer "i8254" frequency 1193182 Hz quality 100 >> hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 >> Timecounter "HPET" frequency 24000000 Hz quality 950 >> Event timer "HPET" frequency 24000000 Hz quality 550 >> Event timer "HPET1" frequency 24000000 Hz quality 440 >> Event timer "HPET2" frequency 24000000 Hz quality 440 >> Event timer "HPET3" frequency 24000000 Hz quality 440 >> Event timer "HPET4" frequency 24000000 Hz quality 440 >> atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 >> atrtc0: registered as a time-of-day clock, resolution 1.000000s >> Event timer "RTC" frequency 32768 Hz quality 0 >> Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 >> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 >> acpi_lid0: <Control Method Lid Switch> on acpi0 >> acpi_button0: <Sleep Button> on acpi0 >> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 >> pci0: <ACPI PCI bus> on pcib0 >> vgapci0: <VGA-compatible display> port 0xe000-0xe03f mem 0xf2000000-0xf2ffffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0 >> vgapci0: Boot video device >> xhci0: <Intel Sunrise Point-LP USB 3.0 controller> mem 0xf4220000-0xf422ffff at device 20.0 on pci0 >> xhci0: 32 bytes context size, 64-bit DMA >> usbus0 on xhci0 >> usbus0: 5.0Gbps Super Speed USB v3.0 >> pci0: <simple comms> at device 22.0 (no driver attached) >> ahci0: <Intel Sunrise Point-LP AHCI SATA controller> port 0xe080-0xe087,0xe088-0xe08b,0xe060-0xe07f mem 0xf4248000-0xf4249fff,0xf424f000-0xf424f0ff,0xf424d000-0xf424d7ff at device 23.0 on pci0 >> ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier not supported >> ahcich1: <AHCI channel> at channel 1 on ahci0 >> pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 >> pci1: <ACPI PCI bus> on pcib1 >> pci1: <unknown> at device 0.0 (no driver attached) >> pcib2: <ACPI PCI-PCI bridge> at device 28.2 on pci0 >> pci2: <ACPI PCI bus> on pcib2 >> pci2: <network> at device 0.0 (no driver attached) >> pcib3: <ACPI PCI-PCI bridge> at device 29.0 on pci0 >> pci3: <ACPI PCI bus> on pcib3 >> vgapci1: <VGA-compatible display> port 0xd000-0xd07f mem 0xf3000000-0xf3ffffff,0xe0000000-0xefffffff,0xf0000000-0xf1ffffff at device 0.0 on pci3 >> isab0: <PCI-ISA bridge> at device 31.0 on pci0 >> isa0: <ISA bus> on isab0 >> pci0: <memory> at device 31.2 (no driver attached) >> hdac0: <Intel Sunrise Point-LP HDA Controller> mem 0xf4240000-0xf4243fff,0xf4230000-0xf423ffff at device 31.3 on pci0 >> em0: <Intel(R) PRO/1000 Network Connection> mem 0xf4200000-0xf421ffff at device 31.6 on pci0 >> em0: Using 1024 TX descriptors and 1024 RX descriptors >> em0: Using an MSI interrupt >> em0: Ethernet address: 54:ee:75:cb:0d:e3 >> em0: netmap queues/slots: TX 1/1024, RX 1/1024 >> acpi_tz0: <Thermal Zone> on acpi0 >> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 >> atkbd0: <AT Keyboard> irq 1 on atkbdc0 >> kbd0 at atkbd0 >> atkbd0: [GIANT-LOCKED] >> psm0: <PS/2 Mouse> irq 12 on atkbdc0 >> psm0: [GIANT-LOCKED] >> WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 13.0. >> psm0: model Synaptics Touchpad, device ID 0 >> battery0: <ACPI Control Method Battery> on acpi0 >> battery1: <ACPI Control Method Battery> on acpi0 >> acpi_acad0: <AC Adapter> on acpi0 >> orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0 >> hwpstate_intel0: <Intel Speed Shift> on cpu0 >> hwpstate_intel1: <Intel Speed Shift> on cpu1 >> hwpstate_intel2: <Intel Speed Shift> on cpu2 >> hwpstate_intel3: <Intel Speed Shift> on cpu3 >> Timecounters tick every 1.000 msec >> ZFS filesystem version: 5 >> ZFS storage pool version: features support (5000) >> hdacc0: <Realtek ALC293 HDA CODEC> at cad 0 on hdac0 >> ugen0.1: <0x8086 XHCI root HUB> at usbus0 >> hdaa0: <Realtek ALC293 Audio Function Group> at nid 1 on hdacc0 >> pcm0: <Realtek ALC293 (Analog)> at nid 20 and 26 on hdaa0 >> pcm1: <Realtek ALC293 (Analog)> at nid 21 and 18 on hdaa0 >> hdacc1: <Intel Skylake HDA CODEC> at cad 2 on hdac0 >> hdaa1: <Intel Skylake Audio Function Group> at nid 1 on hdacc1 >> pcm2: <Intel Skylake (HDMI/DP 8ch)> at nid 3 on hdaa1 >> Trying to mount root from zfs:zroot/ROOT/default []... >> Root mount waiting for: usbus0 CAM >> WARNING: WITNESS option enabled, expect reduced performance. >> uhub0 on usbus0 >> uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 >> ada0 at ahcich1 bus 0 scbus0 target 0 lun 0 >> ada0: <Samsung SSD 850 PRO 512GB EXM04B6Q> ACS-2 ATA SATA 3.x device >> ada0: Serial Number S39FNX0J625463T >> ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) >> ada0: Command Queueing enabled >> ada0: 488386MB (1000215216 512 byte sectors) >> ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN> >> GEOM_ELI: Device ada0p4.eli created. >> GEOM_ELI: Encryption: AES-XTS 256 >> GEOM_ELI: Crypto: accelerated software >> uhub0: 18 ports with 18 removable, self powered >> Root mount waiting for: usbus0 >> ugen0.2: <Prolific Technology Inc. USB-Serial Controller> at usbus0 >> Root mount waiting for: usbus0 >> ugen0.3: <vendor 0x8087 product 0x0a2b> at usbus0 >> ugen0.4: <SunplusIT Inc Integrated Camera> at usbus0 >> Root mount waiting for: usbus0 >> ugen0.5: <vendor 0x138a product 0x0017> at usbus0 >> lo0: link state changed to UP >> pchtherm0: <Skylake PCH Thermal Subsystem> mem 0xf424b000-0xf424bfff at device 20.2 on pci0 >> iwm0: <Intel(R) Dual Band Wireless AC 8260> mem 0xf4000000-0xf4001fff at device 0.0 on pci2 >> iwm0: hw rev 0x200, fw ver 22.361476.0, address f4:8c:50:50:22:83 >> ichsmb0: <Intel Sunrise Point-LP SMBus controller> port 0xefa0-0xefbf mem 0xf424e000-0xf424e0ff at device 31.4 on pci0 >> smbus0: <System Management Bus> on ichsmb0 >> acpi_wmi0: <ACPI-WMI mapping> on acpi0 >> acpi_wmi0: Embedded MOF found >> ACPI: \134_SB.WMI1.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) >> acpi_wmi1: <ACPI-WMI mapping> on acpi0 >> acpi_wmi1: Embedded MOF found >> ACPI: \134_SB.WMI2.WQBB: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) >> acpi_wmi2: <ACPI-WMI mapping> on acpi0 >> acpi_wmi2: Embedded MOF found >> ACPI: \134_SB.WMI3.WQBC: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) >> uplcom0 on uhub0 >> uplcom0: <Prolific Technology Inc. USB-Serial Controller, class 0/0, rev 1.10/3.00, addr 1> on usbus0 >> wlan0: Ethernet address: f4:8c:50:50:22:83 >> ng_ubt: HCI command 0xfc05 timed out >> ubt0 on uhub0 >> ubt0: <vendor 0x8087 product 0x0a2b, class 224/1, rev 2.00/0.01, addr 2> on usbus0 >> wlan0: link state changed to UP >> WARNING: attempt to domain_add(bluetooth) after domainfinalize() >> WARNING: attempt to domain_add(netgraph) after domainfinalize() >> iwm0: code ce, frame 2/216 b800002c unhandled >> Security policy loaded: MAC/ntpd (mac_ntpd) >> >> _______________________________________________ >> freebsd-current@freebsd.org mailing list >> https://lists.freebsd.org/mailman/listinfo/freebsd-current >> To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org" > > Hi. > You would be bitten by a known issue with ThinkPad P50s described in > rtsx (4) man page. > > Try adding dev.rtsx.0.inversion=1 in /boot/loader.conf. I wonder if it's possible to add the workarounds to the driver itself based on "smbios.system.product" or "smbios.system.version" values returned by kern_getenv() as done in some other places (sys/dev/mii/brgphy.c, sys/dev/nfe/if_nfe.c)? For me, "family"/"product" is "ThinkPad P51", and "product" is specific model, "20HH001RRT"; there are different ones under the same family. > Unfortunately, man pages for head cannot read via FreeBSD project top > page. So read raw manpage data with svn commit mail archive below. > > https://lists.freebsd.org/pipermail/svn-src-head/2020-November/141972.html There's a "13.0-current" selection in drop-down menu, wonder how often is the man page list regenerated. > In addition, write attempts to write-protected card causes 100% panic. > For example, sysutils/automount trys fsck on mount. > This causes 100% panic (not only rtsx, but every adapters), avoidable > by write-protect off.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?10a15dcd-aad7-736c-63f4-a7bf06c2fa3f>