Date: Fri, 21 Oct 2005 19:45:52 +0800 From: <fooler@skyinet.net> To: "Marcin Jessa" <lists@yazzy.org> Cc: glebius@FreeBSD.org, current@FreeBSD.org, net@FreeBSD.org Subject: Re: PPPoE and Radius on 6.0RC1 Message-ID: <002801c5d634$fdc66bd0$42764eca@ilo.skyinet.net> References: <20051019235111.2225345e.lists@yazzy.org><20051020070145.GA59364@cell.sick.ru><20051020131549.5e432073.lists@yazzy.org><20051020123159.33f6fa33.lists@yazzy.org><07c501c5d5e1$0ddf67f0$42764eca@ilo.skyinet.net> <20051021112934.7c857fcc.lists@yazzy.org>
next in thread | previous in thread | raw e-mail | index | archive | help
----- Original Message -----
From: "Marcin Jessa" <lists@yazzy.org>
To: <fooler@skyinet.net>
Cc: <glebius@FreeBSD.org>; <current@FreeBSD.org>; <net@FreeBSD.org>
Sent: Friday, October 21, 2005 5:29 PM
Subject: Re: PPPoE and Radius on 6.0RC1
> The problem seems to be ppp is never started by pppoe.
here is a sample configuration for your pppoe server.... assuming you have
two intel nics named fxp0 and fxp1... fxp0 is facing the net and fxp1 is
facing the pppoe clients... fxp1 is ip less...
please do the following...
1. in your kernel config file, add the following options and compile the
kernel
options NETGRAPH
options NETGRAPH_ETHER
options NETGRAPH_PPPOE
options NETGRAPH_SOCKET
2. in your /etc/rc.conf
gateway_enable="YES"
ifconfig_fxp0="inet 192.168.2.8 netmask 255.255.255.0"
ifconfig_fxp1="up"
pppoed_enable="YES"
pppoed_flags="-l PPPoE -P /var/run/pppoed.pid"
pppoed_interface="fxp1"
3. in your /etc/ppp/ppp.conf
default:
set log Phase Chat LCP IPCP CCP tun command Debug Radius
ident user-ppp VERSION (built COMPILATIONDATE)
PPPoE:
set ifaddr 192.168.2.8 192.168.2.100-192.168.2.120 255.255.255.255
set radius /etc/ppp/radius.conf
set dns 192.168.2.45
deny deflate
disable deflate
accept dns
enable lqr
enable echo
deny pap
deny chap
deny LANMan
deny MSChap
enable MSChapV2
disable pred1
disable utmp
disable ipv6cp
set callback
set cbcp
set cd 5!
set nbns
set speed sync
set timeout 0
4. in your /etc/ppp/radius.conf
auth 127.0.0.1:1812 secret_key 3 3
acct 127.0.0.1:1813 secret_key 3 3
try to remark "set radius /etc/ppp/radius.conf" first in /etc/ppp/ppp.conf
to make sure that your pppoe authentication is working without using a
radius server... if all went well, then make sure your radius server is
working properly by binding to ip address 127.0.0.1 only for security
purposes...
fooler.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?002801c5d634$fdc66bd0$42764eca>