Date: Sun, 24 Mar 2002 14:21:15 -0800 From: Randy Bush <randy@psg.com> To: "John Nielsen" <oniblerz@attbi.com> Cc: "freebsd emulator list" <freebsd-emulation@freebsd.org> Subject: Re: vmware nat windoze services Message-ID: <E16pGMV-000OPy-00@rip.psg.com> References: <E16obOB-000HmW-00@rip.psg.com> <02f701c1d23a$d4be6c30$0900a8c0@max>
next in thread | previous in thread | raw e-mail | index | archive | help
> When you install the VMware port, answer "yes" when it asks if you want to
> use netgraph bridging. Compile a kernel with bridging support (options
> BRIDGE). The VMnet module is by default initialized to use 192.168.0.1.
> It should use an address on a network that is NOT IN USE. If you use the
> 192.168.0.0/24 network then change this address in
> /usr/local/etc/vmware/config.
>
> Configure your virtual machine to use "host-only" networking. This merely
> tells VMware not to worry about bridging, since the FreeBSD host is doing
> that for you. Configure the guest as if it were another node on your real
> network.
oops!
winipcfg shows the horrible net 169
# ngctl list
There are 1 total nodes:
Name: ngctl693 Type: socket ID: 0000000a Num hooks: 0
so i need to learn how to confgure netgraph i guess
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.5-STABLE #11: Sun Mar 24 11:56:18 PST 2002
root@roam.psg.com:/usr/obj/usr/src/sys/ROAM
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (847.40-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 268353536 (262064K bytes)
avail memory = 257712128 (251672K bytes)
Preloaded elf kernel "kernel" at 0xc035f000.
Preloaded elf module "snd_maestro3.ko" at 0xc035f09c.
Preloaded elf module "snd_pcm.ko" at 0xc035f140.
Pentium Pro MTRR support enabled
Using $PIR table, 9 entries at 0xc00fbd80
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI model 4c46 graphics accelerator> at 0.0 irq 11
pcic0: <TI PCI-1420 PCI-CardBus Bridge> irq 11 at device 3.0 on pci0
pcic0: PCI Memory allocated: 0x44000000
pcic0: TI12XX PCI Config Reg: [ring enable][speaker enable][CSC serial isa irq]
pccard0: <PC Card bus (classic)> on pcic0
pcic1: <TI PCI-1420 PCI-CardBus Bridge> irq 11 at device 3.1 on pci0
pcic1: PCI Memory allocated: 0x44001000
pcic1: TI12XX PCI Config Reg: [ring enable][speaker enable][CSC serial isa irq]
pccard1: <PC Card bus (classic)> on pcic1
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x860-0x86f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xdce0-0xdcff irq 11 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller> port 0x840-0x84f at device 7.3 on pci0
pcm0: <ESS Technology Maestro3> port 0xd800-0xd8ff mem 0xf3ffe000-0xf3ffffff irq 5 at device 8.0 on pci0
xl0: <3Com 3c556 Fast Etherlink XL> port 0xd400-0xd4ff mem 0xf3ffd800-0xf3ffd87f,0xf3ffdc00-0xf3ffdc7f irq 11 at device 16.0 on pci0
xl0: Ethernet address: 00:01:03:84:67:74
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <unknown card> (vendor=0x10b7, dev=0x1007) at 16.1 irq 11
orm0: <Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd07ff,0xd0800-0xd0fff,0xd1000-0xd17ff,0xd1800-0xd1fff,0xd2000-0xd27ff,0xd2800-0xd2fff,0xd3000-0xd37ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ad0: 19077MB <IBM-DJSA-220> [38760/16/63] at ata0-master UDMA33
Mounting root from ufs:/dev/ad0s3a
pccard: card inserted, slot 1
pccard: card removed, slot 1
pccard: card inserted, slot 1
/dev/vmmon: Module vmmon: registered with major=200 minor=0 tag=$Name: build-570 $
/dev/vmmon: Module vmmon: initialized
module_register: module netgraph already exists!
linker_file_sysinit "netgraph.ko" failed to register! 17
link_elf: symbol ng_ether_enaddr_type undefined
wi0: <WaveLAN/IEEE 802.11> at port 0x240-0x27f irq 11 slot 1 on pccard1
wi0: 802.11 address: 00:60:1d:23:c3:52
wi0: using Lucent chip or unknown chip
# netgraph(4). Enable the base netgraph code with the NETGRAPH option.
# Individual node types can be enabled with the corresponding option
# listed below; however, this is not strictly necessary as netgraph
# will automatically load the corresponding KLD module if the node type
# is not already compiled into the kernel. Each type below has a
# corresponding man page, e.g., ng_async(8).
options NETGRAPH #netgraph(4) system
#options NETGRAPH_ASYNC
#options NETGRAPH_BPF
#options NETGRAPH_CISCO
#options NETGRAPH_ECHO
#options NETGRAPH_ETHER
#options NETGRAPH_FRAME_RELAY
#options NETGRAPH_HOLE
#options NETGRAPH_IFACE
#options NETGRAPH_KSOCKET
#options NETGRAPH_LMI
## MPPC compression requires proprietary files (not included)
##options NETGRAPH_MPPC_COMPRESSION
#options NETGRAPH_MPPC_ENCRYPTION
#options NETGRAPH_ONE2MANY
#options NETGRAPH_PPP
#options NETGRAPH_PPPOE
#options NETGRAPH_PPTPGRE
#options NETGRAPH_RFC1490
#options NETGRAPH_SOCKET
#options NETGRAPH_TEE
#options NETGRAPH_TTY
#options NETGRAPH_UI
#options NETGRAPH_VJC
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-emulation" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E16pGMV-000OPy-00>