Date: Thu, 18 Mar 2004 10:23:45 -0800 (PST) From: Julian Elischer <julian@elischer.org> To: Christopher Sean Hilton <chris@vindaloo.com> Cc: freebsd-stable@freebsd.org Subject: Re: HEADSUP!!! USB MFC committed Message-ID: <Pine.BSF.4.21.0403181022110.72230-100000@InterJet.elischer.org> In-Reply-To: <20040318172647.GA424@endaba.pvt.vindaloo.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, 18 Mar 2004, Christopher Sean Hilton wrote: > On Thu, Mar 18, 2004 at 11:43:47AM -0500, Christopher Sean Hilton wrote: > > Summary: > > > > This is probably too old a datapoint but... > > > > I just updated my kernel to last Tuesday's version of 4.9-STABLE. > > > > Good: > > > > My USB mouse works as expected. > > > > My USB hard drive works correctly. > > > > > > No change: > > > > My Olympus C-2100Z USB camera incorrectly comes up under the ugen driver rather > > than the umass driver. > > > > My Handspring Treo 300 comes up under the ugen driver rather than > > the visor driver. I have not honestly spent the time needed to > > get this device working under FreeBSD. Nuf said. These just need ID strings put in the usbdevs file. (or somewhere) > > > > Bad: > > > > My Memorex USB pendrive probes correctly if installed at boot > > time but hangs the USB bus if installed after boot. > > > > Following up on my own work I found that the Pen Drive will probe > correctly after a long period of time if it is on the USB Bus alone > once the drive has been assigned device a disk device, da0, the usb > bus works normally. Should I take this to mean that there is NOT a problem, or that there is still a problem, but not as bad as you originally thought? > > > Boot: > > Mar 18 12:06:54 endaba /kernel: acd0: DVD-ROM <HITACHI DVD-ROM GD-7000> at ata1-master PIO4 > Mar 18 12:06:54 endaba /kernel: acd1: CD-RW <CD-RW BCE5224IM> at ata1-slave PIO4 > Mar 18 12:06:54 endaba /kernel: Mounting root from ufs:/dev/ad0s3a > Mar 18 12:07:13 endaba /kernel: drm0: <ATI Radeon QY RV100 VE> port 0xc000-0xc0ff mem 0xdd000000-0xdd00ffff,0xd0000000-0xd7ffffff irq 10 at device 0.0 on pci1 > Mar 18 12:07:13 endaba /kernel: info: [drm] AGP at 0xd8000000 64MB > Mar 18 12:07:13 endaba /kernel: info: [drm] Initialized radeon 1.8.0 20020828 on minor 0 > > Unplug the mouse: > > Mar 18 12:07:29 endaba /kernel: ums0: at uhub1 port 4 (addr 3) disconnected > Mar 18 12:07:29 endaba /kernel: ums0: detached > Mar 18 12:07:29 endaba moused: unable to open /dev/ums0: Device not configured > > Plug in the Pen drive: > > Mar 18 12:07:36 endaba /kernel: umass0: USB Solid state disk, rev 1.10/1.00, addr 3 > Mar 18 12:07:55 endaba login: ROOT LOGIN (root) ON ttyv1 > > Go get coffee: > > Mar 18 12:09:46 endaba /kernel: da0 at umass-sim0 bus 0 target 0 lun 0 > Mar 18 12:09:46 endaba /kernel: da0: <Memorex ThumbDrive 1.12> Removable Direct Access SCSI-2 device > Mar 18 12:09:46 endaba /kernel: da0: 650KB/s transfers > Mar 18 12:09:46 endaba /kernel: da0: 252MB (516096 512 byte sectors: 64H 32S/T 252C) > > Come back from coffee and plug in the mouse: > > Mar 18 12:15:06 endaba /kernel: ums0: Logitech USB Receiver, rev 1.10/9.10, addr 4, iclass 3/1 > Mar 18 12:15:06 endaba /kernel: ums0: 5 buttons and Z dir. > > Unplug the pen drive. > > Mar 18 12:21:07 endaba /kernel: umass0: at uhub1 port 4 (addr 3) disconnected > Mar 18 12:21:07 endaba /kernel: (da0:umass-sim0:0:0:0): lost device > Mar 18 12:21:07 endaba /kernel: (da0:umass-sim0:0:0:0): removing device entry > Mar 18 12:21:07 endaba /kernel: umass0: detached > Mar 18 12:21:12 endaba /kernel: umass0: USB Solid state disk, rev 1.10/1.00, addr 3 > > The mouse cycles on and off: > > Mar 18 12:21:12 endaba /kernel: ums0: at uhub1 port 3 (addr 4) disconnected > Mar 18 12:21:12 endaba /kernel: ums0: detached > Mar 18 12:21:12 endaba moused: unable to open /dev/ums0: Device not configured > Mar 18 12:21:13 endaba /kernel: ums0: Logitech USB Receiver, rev 1.10/9.10, addr 4, iclass 3/1 > Mar 18 12:21:13 endaba /kernel: ums0: 5 buttons and Z dir. > Mar 18 12:21:13 endaba /kernel: ums0: at uhub1 port 3 (addr 4) disconnected > Mar 18 12:21:13 endaba /kernel: ums0: detached > Mar 18 12:21:13 endaba moused: unable to open /dev/ums0: Device not configured > Mar 18 12:21:14 endaba /kernel: ums0: Logitech USB Receiver, rev 1.10/9.10, addr 4, iclass 3/1 > Mar 18 12:21:14 endaba /kernel: ums0: 5 buttons and Z dir. > Mar 18 12:21:14 endaba /kernel: ums0: at uhub1 port 3 (addr 4) disconnected > Mar 18 12:21:14 endaba /kernel: ums0: detached > > ... > > Unplug the mouse and wait: > > Mar 18 12:21:39 endaba /kernel: ums0: Logitech USB Receiver, rev 1.10/9.10, addr 4, iclass 3/1 > Mar 18 12:21:39 endaba /kernel: ums0: 5 buttons and Z dir. > Mar 18 12:21:39 endaba /kernel: ums0: at uhub1 port 3 (addr 4) disconnected > Mar 18 12:21:39 endaba /kernel: ums0: detached > Mar 18 12:21:39 endaba moused: unable to open /dev/ums0: Device not configured > > The Pen Drive is back: > > Mar 18 12:23:22 endaba /kernel: da0 at umass-sim0 bus 0 target 0 lun 0 > Mar 18 12:23:22 endaba /kernel: da0: <Memorex ThumbDrive 1.12> Removable Direct Access SCSI-2 device > Mar 18 12:23:22 endaba /kernel: da0: 650KB/s transfers > Mar 18 12:23:22 endaba /kernel: da0: 252MB (516096 512 byte sectors: 64H 32S/T 252C) > > I have two of these Pen Drives. If you would like one to test I can > send it to you. > > -- chris > > -- > Chris Hilton chilton-at-vindaloo-dot-com > ------------------------------------------------------------------------ > "All I was doing was trying to get home from work!" > -- Rosa Parks >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0403181022110.72230-100000>