Date: Sun, 5 Aug 2001 10:12:12 -0700 (PDT) From: Greg Satz <satz@iranger.com> To: freebsd-gnats-submit@FreeBSD.org Subject: i386/29471: latest 4.3 stable fails to boot up; hung waiting for SCSI disks Message-ID: <200108051712.f75HCC245200@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 29471
>Category: i386
>Synopsis: latest 4.3 stable fails to boot up; hung waiting for SCSI disks
>Confidential: no
>Severity: critical
>Priority: high
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Sun Aug 05 10:20:00 PDT 2001
>Closed-Date:
>Last-Modified:
>Originator: Greg Satz
>Release: 4.3-Stable
>Organization:
>Environment:
FreeBSD fnu.iranger.com 4.1.1-RELEASE FreeBSD 4.1.1-RELEASE #0: Tue Sep 26 00:46:59 GMT 2000 jkh@narf.osd.bsdi.com:/usr/src/sys/compile/GENERIC i386
>Description:
Booting up the latest 4.3-Stable release hangs when waiting for SCSI disks to settle. I have waited up to 15 minutes. Three finger salute doesn't work either. System has two SCSI adapters: 274X and 2944. Nothing is on the 2944 (tape device is off) and disk is on 274X.
I have reverted back to the 4.1.1 GENERIC kernel for now.
>How-To-Repeat:
Boot 4.3 stable on EISA/274X configuration.
ok boot
SMAP type=01 base=00000000 00000000 len=00000000 0009fc00
SMAP type=01 base=00000000 0009fc00 len=00000000 00000400
SMAP type=02 base=00000000 000f0000 len=00000000 00010000
SMAP type=01 base=00000000 00100000 len=00000000 04700000
SMAP type=02 base=00000000 fec00000 len=00000000 00001000
SMAP type=02 base=00000000 fee00000 len=00000000 00001000
SMAP type=02 base=00000000 ffff0000 len=00000000 00010000
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-STABLE #5: Fri Aug 3 20:26:59 MDT 2001
root@fnu.iranger.com:/usr/src/sys/compile/IRANGER
Calibrating clock(s) ... TSC clock: 166456463 Hz, i8254 clock: 1193238 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium/P54C (166.45-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x52c Stepping = 12
Features=0x3bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC>
real memory = 75497472 (73728K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00336000 - 0x047f7fff, 72097792 bytes (17602 pages)
avail memory = 70336512 (68688K bytes)
APIC_IO: MP table broken: 8259->APIC entry missing!
Programming 16 pins in IOAPIC #0
EISA INTCONTROL = 00000e20
IOAPIC #0 intpin 2 -> irq 0
SMP: CPU0 apic_initialize():
lint0: 0x00000700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00030010, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00030010, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x000f0011, at 0xfec00000
bios32: Found BIOS32 Service Directory header at 0xc00fa570
bios32: Entry = 0xfa8a0 (c00fa8a0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xa8d0
Other BIOS signatures found:
ACPI: 00000000
Preloaded elf kernel "kernel" at 0xc030d000.
Intel Pentium detected, installing workaround for F00F bug
stray irq 7
Math emulator present
SMP: CPU0 bsp_apic_configure():
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000010 SVR: 0x000001ff
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x00000000 (0x80000000)
pci_open(1b): mode1res=0x80000000 (0xff000001)
pci_cfgcheck: device 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 2
2 23 24 25 26 27 28 29 30 31 -- nothing found
pci_open(2): mode 2 enable port (0x0cf8) is 0x00
pci_open(2a): mode2res=0x0e (0x0e)
pci_open(2a): now trying mechanism 2
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=04a38086)
npx0: <math processor> on motherboard
npx0: INT 16 interface
i586_bzero() bandwidth = 119660165 bytes/sec
bzero() bandwidth = 153515505 bytes/sec
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x00000000 (0x80000000)
pci_open(1b): mode1res=0x80000000 (0xff000001)
pci_cfgcheck: device 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 2
2 23 24 25 26 27 28 29 30 31 -- nothing found
pci_open(2): mode 2 enable port (0x0cf8) is 0x00
pci_open(2a): mode2res=0x0e (0x0e)
pci_open(2a): now trying mechanism 2
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=04a38086)
pcib0: <Host to PCI bridge> on motherboard
found-> vendor=0x8086, dev=0x04a3, revid=0x11
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x0482, revid=0x05
class=00-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x9004, dev=0x7478, revid=0x03
class=01-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=5
map[10]: type 1, range 32, base 00006000, size 8
map[14]: type 1, range 32, base f4001000, size 12
found-> vendor=0x1106, dev=0x3043, revid=0x06
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=9
map[10]: type 1, range 32, base 00006100, size 7
map[14]: type 1, range 32, base f4000000, size 7
found-> vendor=0x5333, dev=0x5631, revid=0x06
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base f0000000, size 26
pci0: <PCI bus> on pcib0
CPU: Pentium, 100MHz, CPU->Memory posting ON
Warning: Cache parity disabled!
Warning: DRAM parity mask!
Cache: 512KB writeback, cache clocks=3-2-2-2/4-2-2-2
Cache flags: byte-control
DRAM: page mode memory clocks=X-4-4-4 (70ns)
CPU->PCI: posting ON, burst mode OFF, PCI clocks=2-1-1-1
PCI->Memory: posting OFF
Refresh: RAS#Only
isab0: <Intel 82375EB PCI-EISA bridge> at device 2.0 on pci0
eisa0: <EISA bus> on isab0
mainboard0: <TYN0003 (System Board)> on eisa0 slot 0
ahc0: <Adaptec 274X SCSI adapter> at 0x4c00-0x4cff, irq 11 (level)
ahc0: on eisa0 slot 4
ahc0: Downloading Sequencer Program... 412 instructions downloaded
aic7770: Twin Channel, A SCSI Id=7, B SCSI Id=7, primary A, 4/255 SCBs
isa0: <ISA bus> on isab0
ahc1: <Adaptec 2944 SCSI adapter> port 0x6000-0x60ff mem 0xf4001000-0xf4001fff i
rq 5 at device 13.0 on pci0
ahc1: Reading SEEPROM...done.
ahc1: Low byte termination Enabled
ahc1: High byte termination Enabled
ahc1: Downloading Sequencer Program... 410 instructions downloaded
aic7870: Wide Channel A, SCSI Id=7, 16/255 SCBs
vr0: <VIA VT3043 Rhine I 10/100BaseTX> port 0x6100-0x617f mem 0xf4000000-0xf4000
07f irq 9 at device 14.0 on pci0
vr0: Ethernet address: 00:80:c8:e1:1d:85
miibus0: <MII bus> on vr0
amphy0: <DM9101 10/100 media interface> on miibus0
amphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: vr0 attached
pci0: <S3 ViRGE graphics accelerator> (vendor=0x5333, dev=0x5631) at 15.0 irq 10
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc87ff,0xd8000-0xdbfff,0xe
f000-0xeffff on isa0
fdc0: <NEC 765 or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x0000
ata0: mask=00 status0=ff status1=ff
ata0: probe allocation failed
ata0 failed to probe at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x0000
ata1: mask=00 status0=ff status1=ff
ata1: probe allocation failed
ata1 failed to probe at port 0x170-0x177,0x376 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x1d0000
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x841 0x851 0x841 0x841
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16450, console
sio1: irq maps: 0x841 0x849 0x841 0x841
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16450
sio2: irq maps: 0x841 0x1841 0x841 0x841
sio2 at port 0x100-0x107 flags 0x905 on isa0
sio2: type 16550A (multiport)
sio3: irq maps: 0x841 0x1841 0x841 0x841
sio3 at port 0x108-0x10f flags 0x905 on isa0
sio3: type 16550A (multiport)
sio4: irq maps: 0x841 0x1841 0x841 0x841
sio4 at port 0x110-0x117 flags 0x905 on isa0
sio4: type 16550A (multiport)
sio5: irq maps: 0x841 0x1841 0x841 0x841
sio5 at port 0x118-0x11f flags 0x905 on isa0
sio5: type 16550A (multiport)
sio6: irq maps: 0x841 0x1841 0x841 0x841
sio6 at port 0x120-0x127 flags 0x905 on isa0
sio6: type 16550A (multiport)
sio7: irq maps: 0x841 0x1841 0x841 0x841
sio7 at port 0x128-0x12f flags 0x905 on isa0
sio7: type 16550A (multiport)
sio8: irq maps: 0x841 0x1841 0x841 0x841
sio8 at port 0x130-0x137 flags 0x905 on isa0
sio8: type 16550A (multiport)
sio9: irq maps: 0x841 0x1841 0x841 0x841
sio9 at port 0x138-0x13f irq 12 flags 0x905 on isa0
sio9: type 16550A (multiport master)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
isa_probe_children: probing PnP devices
SMP: enabled INTs: 1, 3, 4, 5, 6, 7, 9, 11, 12, apic_imen: 0x00ffe505
BIOS Geometries:
0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
bpf: lo0 attached
Waiting 5 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
(noperiph:ahc0:1:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
(noperiph:ahc1:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
SMP: AP CPU #1 Launched!
SMP: CPU1 apic_initialize():
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200108051712.f75HCC245200>