Date: Tue, 1 May 2001 09:46:29 -0800 (AKDT) From: <flash@alaska.net> To: Gordon Tetlow <gordont@bluemtn.net> Cc: <stable@FreeBSD.ORG> Subject: Re: Strange BTX halted error Message-ID: <Pine.GSO.4.33.0105010945200.8084-100000@calvino.alaska.net> In-Reply-To: <Pine.BSF.4.33.0105011023260.30516-100000@sdmail0.sd.bmarts.com>
next in thread | previous in thread | raw e-mail | index | archive | help
I had the exact same problem when I had 'SCSI Bios' enabled on my Adaptec 2940. Turned it off and that stopped. Not sure what the problem is, but I know that is the solution for me :) Marc On Tue, 1 May 2001, Gordon Tetlow wrote: > I have an N440BX motherboard that, when using console redirection (so the > BIOS messages and such come over the serial port), displays the following: > > BTX loader 1.00 BTX version is 1.01 > Console: internal video/keyboard > BIOS drive A: is disk0 > BIOS drive C: is disk1 > BIOS 635kB/523200kB available memory > > FreeBSD/i386 bootstrap loader, Revision 0.8 > (root@web-b1.pa.bmarts.com, Wed Oct 4 15:01:32 PDT 2000) > Loading /boot/defaults/loader.conf > > int=0000000d err=00000000 efl=00010216 eip=00005a6c > eax=ff08428b ebx=0000760c ecx=ffffffff edx=00030160 > esi=00037788 edi=00093468 ebp=00093258 esp=00093258 > cs=002b ds=0033 es=0033 fs=0033 gs=0033 ss=0033 > cs:eip=89 11 83 40 08 04 c9 c3-55 89 e5 8b 45 08 8b 48 > ss:esp=98 32 09 00 d8 91 00 00-8b 42 08 ff 60 01 03 00 > BTX halted > > I was wondering if anyone else has seen this. The problem seems somewhat > intermittent. It doesn't *always* happen but it often does. If I hit the > reset switch, it seems to boot reliably from there. > > This system (actually systems. It's more than one so I know it's not > hardware) booted perfectly until I enabled the console redirection. > Nothing on the box has changed other than that. > > Any ideas? I'm stumped. > > -gordon > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-stable" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.GSO.4.33.0105010945200.8084-100000>