Date: Tue, 26 Apr 2005 02:35:56 +0200 (CEST) From: Sten Spans <sten@blinkenlights.nl> To: "Michael G. Jung" <mikej@confluenttech.com> Cc: freebsd-net@freebsd.org Subject: Re: EM driver and Intel Pro 1000 MT (A78408-008) Message-ID: <Pine.SOC.4.61.0504260233390.23327@tea.blinkenlights.nl> In-Reply-To: <9D7F0DF3FB16D41184010050DA90E00001C8751B@neo.confluentasp.local> References: <9D7F0DF3FB16D41184010050DA90E00001C8751B@neo.confluentasp.local>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, 25 Apr 2005, Michael G. Jung wrote: > FreeBSD firewall.mikej.com 5.4-RC3 FreeBSD 5.4-RC3 #5: Sun Apr 24 19:18:40 EDT 2005 > mikej@firewall.mikej.com:/usr/obj/usr/src/sys/FIREWALL i386 > > em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> > port 0xef00-0xef3f mem 0xfeba0000-0xfebbffff,0xfebc0000-0xfebdffff irq 18 at device 18.0 on pci0 > > I got several of these card which I have put in FreeBSD/Windows machines. > > Under FreeBSD 5.4-RC3 I can not get the card to run at GB. > > If I put the same card that fails under FreeBSD in a M$ > machine the card works at 1000/Full fine. The card does work at 100/Full in BSD box ok. > > if I config the adapter like > "ifconfig inet 10.0.0.3 netmask 255.255.255.0 media 1000baseTX mediaopt full-duplex" > > and then do ifconfig em0 status shows "NO CARRIER". > > Is this a know problem? The card is attached to a DLINK DGS-1005D switch. I have also tried > moving the BSD box to a switch port that a M$ machine is working at 1000/Full. > > Anyone have ideas on this? Have you tried autonegotiation ? ( Gigabit ethernet requires full-duplex, and in 99% of the cases should work with autoneg ) -- Sten Spans "There is a crack in everything, that's how the light gets in." Leonard Cohen - Anthem
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.SOC.4.61.0504260233390.23327>