Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 30 May 2010 17:11:13 +0400
From:      vadim-123@mail.ru
To:        freebsd-bugs@freebsd.org
Subject:   Don't work 3COM PCMCIA adaptor on laptop
Message-ID:  <1773876190.20100530171113@mail.ru>

next in thread | raw e-mail | index | archive | help
[root@localhost ~]# pciconf -l
hostb0@pci0:0:0:0:      class=3D0x060000 card=3D0x03411462 chip=3D0x27a0808=
6 rev=3D0x03 hdr=3D0x00
vgapci0@pci0:0:2:0:     class=3D0x030000 card=3D0x03411462 chip=3D0x27a2808=
6 rev=3D0x03 hdr=3D0x00
vgapci1@pci0:0:2:1:     class=3D0x038000 card=3D0x03411462 chip=3D0x27a6808=
6 rev=3D0x03 hdr=3D0x00
none0@pci0:0:27:0:      class=3D0x040300 card=3D0x03491462 chip=3D0x27d8808=
6 rev=3D0x02 hdr=3D0x00
pcib1@pci0:0:28:0:      class=3D0x060400 card=3D0x03411462 chip=3D0x27d0808=
6 rev=3D0x02 hdr=3D0x01
pcib2@pci0:0:28:1:      class=3D0x060400 card=3D0x03411462 chip=3D0x27d2808=
6 rev=3D0x02 hdr=3D0x01
pcib3@pci0:0:28:2:      class=3D0x060400 card=3D0x03411462 chip=3D0x27d4808=
6 rev=3D0x02 hdr=3D0x01
uhci0@pci0:0:29:0:      class=3D0x0c0300 card=3D0x03411462 chip=3D0x27c8808=
6 rev=3D0x02 hdr=3D0x00
uhci1@pci0:0:29:1:      class=3D0x0c0300 card=3D0x03411462 chip=3D0x27c9808=
6 rev=3D0x02 hdr=3D0x00
uhci2@pci0:0:29:2:      class=3D0x0c0300 card=3D0x03411462 chip=3D0x27ca808=
6 rev=3D0x02 hdr=3D0x00
uhci3@pci0:0:29:3:      class=3D0x0c0300 card=3D0x03411462 chip=3D0x27cb808=
6 rev=3D0x02 hdr=3D0x00
ehci0@pci0:0:29:7:      class=3D0x0c0320 card=3D0x03411462 chip=3D0x27cc808=
6 rev=3D0x02 hdr=3D0x00
pcib4@pci0:0:30:0:      class=3D0x060401 card=3D0x03411462 chip=3D0x2448808=
6 rev=3D0xe2 hdr=3D0x01
isab0@pci0:0:31:0:      class=3D0x060100 card=3D0x03411462 chip=3D0x27b9808=
6 rev=3D0x02 hdr=3D0x00
atapci0@pci0:0:31:2:    class=3D0x010180 card=3D0x03411462 chip=3D0x27c4808=
6 rev=3D0x02 hdr=3D0x00
ichsmb0@pci0:0:31:3:    class=3D0x0c0500 card=3D0x03411462 chip=3D0x27da808=
6 rev=3D0x02 hdr=3D0x00
re0@pci0:2:0:0: class=3D0x020000 card=3D0x03411462 chip=3D0x816810ec rev=3D=
0x01 hdr=3D0x00
none1@pci0:3:0:0:       class=3D0x028000 card=3D0x10018086 chip=3D0x4222808=
6 rev=3D0x02 hdr=3D0x00
cbb0@pci0:4:4:0:        class=3D0x060700 card=3D0x03411462 chip=3D0x7134121=
7 rev=3D0x21 hdr=3D0x02
none2@pci0:4:4:2:       class=3D0x080500 card=3D0x03411462 chip=3D0x7120121=
7 rev=3D0x01 hdr=3D0x00
none3@pci0:4:4:3:       class=3D0x068000 card=3D0x03411462 chip=3D0x7130121=
7 rev=3D0x01 hdr=3D0x00
fwohci0@pci0:4:4:4:     class=3D0x0c0010 card=3D0x00f71217 chip=3D0x00f7121=
7 rev=3D0x02 hdr=3D0x00
xl0@pci0:5:0:0: class=3D0x020000 card=3D0x5c5710b7 chip=3D0x525710b7 rev=3D=
0x10 hdr=3D0x00

[root@localhost ~]# pciconf -lv
hostb0@pci0:0:0:0:      class=3D0x060000 card=3D0x03411462 chip=3D0x27a0808=
6 rev=3D0x03 hdr=3D0x00
    vendor     =3D 'Intel Corporation'
    device     =3D '955XM/945GM/PM/GMS/940GML Express Processor to DRAM Con=
troller'
    class      =3D bridge
    subclass   =3D HOST-PCI
vgapci0@pci0:0:2:0:     class=3D0x030000 card=3D0x03411462 chip=3D0x27a2808=
6 rev=3D0x03 hdr=3D0x00
    vendor     =3D 'Intel Corporation'
    device     =3D 'Mobile 945GM/GU Express Integrated Graphics Controller'
    class      =3D display
    subclass   =3D VGA
vgapci1@pci0:0:2:1:     class=3D0x038000 card=3D0x03411462 chip=3D0x27a6808=
6 rev=3D0x03 hdr=3D0x00
    vendor     =3D 'Intel Corporation'
    device     =3D 'Mobile 945GM/GU Express Integrated Graphics Controller'
    class      =3D display
none0@pci0:0:27:0:      class=3D0x040300 card=3D0x03491462 chip=3D0x27d8808=
6 rev=3D0x02 hdr=3D0x00
    vendor     =3D 'Intel Corporation'
    device     =3D '82801G (ICH7 Family) High Definition Audio'
    class      =3D multimedia
    subclass   =3D HDA
pcib1@pci0:0:28:0:      class=3D0x060400 card=3D0x03411462 chip=3D0x27d0808=
6 rev=3D0x02 hdr=3D0x01
    vendor     =3D 'Intel Corporation'
    device     =3D '82801G (ICH7 Family) PCIe Root Port'
    class      =3D bridge
    subclass   =3D PCI-PCI
pcib2@pci0:0:28:1:      class=3D0x060400 card=3D0x03411462 chip=3D0x27d2808=
6 rev=3D0x02 hdr=3D0x01
    vendor     =3D 'Intel Corporation'
    device     =3D '82801G (ICH7 Family) PCIe Root Port'
    class      =3D bridge
    subclass   =3D PCI-PCI
pcib3@pci0:0:28:2:      class=3D0x060400 card=3D0x03411462 chip=3D0x27d4808=
6 rev=3D0x02 hdr=3D0x01
    vendor     =3D 'Intel Corporation'
    device     =3D '82801G (ICH7 Family) PCIe Root Port'
    class      =3D bridge
    subclass   =3D PCI-PCI
uhci0@pci0:0:29:0:      class=3D0x0c0300 card=3D0x03411462 chip=3D0x27c8808=
6 rev=3D0x02 hdr=3D0x00
    vendor     =3D 'Intel Corporation'
    device     =3D '82801G (ICH7 Family) USB Universal Host Controller'
    class      =3D serial bus
    subclass   =3D USB
uhci1@pci0:0:29:1:      class=3D0x0c0300 card=3D0x03411462 chip=3D0x27c9808=
6 rev=3D0x02 hdr=3D0x00
    vendor     =3D 'Intel Corporation'
    device     =3D '82801G (ICH7 Family) USB Universal Host Controller'
    class      =3D serial bus
    subclass   =3D USB
uhci2@pci0:0:29:2:      class=3D0x0c0300 card=3D0x03411462 chip=3D0x27ca808=
6 rev=3D0x02 hdr=3D0x00
    vendor     =3D 'Intel Corporation'
    device     =3D '82801G (ICH7 Family) USB Universal Host Controller'
    class      =3D serial bus
    subclass   =3D USB
uhci3@pci0:0:29:3:      class=3D0x0c0300 card=3D0x03411462 chip=3D0x27cb808=
6 rev=3D0x02 hdr=3D0x00
    vendor     =3D 'Intel Corporation'
    device     =3D '82801G (ICH7 Family) USB Universal Host Controller'
    class      =3D serial bus
    subclass   =3D USB
ehci0@pci0:0:29:7:      class=3D0x0c0320 card=3D0x03411462 chip=3D0x27cc808=
6 rev=3D0x02 hdr=3D0x00
    vendor     =3D 'Intel Corporation'
    device     =3D '82801G (ICH7 Family) USB 2.0 Enhanced Host Controller'
    class      =3D serial bus
    subclass   =3D USB
pcib4@pci0:0:30:0:      class=3D0x060401 card=3D0x03411462 chip=3D0x2448808=
6 rev=3D0xe2 hdr=3D0x01
    vendor     =3D 'Intel Corporation'
    device     =3D '82801 Family (ICH2/3/4/5/6/7/8/9-M) Hub Interface to PC=
I Bridge'
    class      =3D bridge
    subclass   =3D PCI-PCI
isab0@pci0:0:31:0:      class=3D0x060100 card=3D0x03411462 chip=3D0x27b9808=
6 rev=3D0x02 hdr=3D0x00
    vendor     =3D 'Intel Corporation'
    device     =3D '82801GBM (ICH7-M) LPC Interface Controller'
    class      =3D bridge
    subclass   =3D PCI-ISA
atapci0@pci0:0:31:2:    class=3D0x010180 card=3D0x03411462 chip=3D0x27c4808=
6 rev=3D0x02 hdr=3D0x00
    vendor     =3D 'Intel Corporation'
    device     =3D '82801GBM/GHM (ICH7-M Family) Serial ATA Storage Control=
ler'
    class      =3D mass storage
    subclass   =3D ATA
ichsmb0@pci0:0:31:3:    class=3D0x0c0500 card=3D0x03411462 chip=3D0x27da808=
6 rev=3D0x02 hdr=3D0x00
    vendor     =3D 'Intel Corporation'
    device     =3D '82801G (ICH7 Family) SMBus Controller'
    class      =3D serial bus
    subclass   =3D SMBus
re0@pci0:2:0:0: class=3D0x020000 card=3D0x03411462 chip=3D0x816810ec rev=3D=
0x01 hdr=3D0x00
    vendor     =3D 'Realtek Semiconductor'
    device     =3D 'Gigabit Ethernet NIC(NDIS 6.0) (RTL8168/8111)'
    class      =3D network
    subclass   =3D ethernet
none1@pci0:3:0:0:       class=3D0x028000 card=3D0x10018086 chip=3D0x4222808=
6 rev=3D0x02 hdr=3D0x00
    vendor     =3D 'Intel Corporation'
    device     =3D 'Intel 3945ABG Wireless LAN controller (10208086)'
    class      =3D network
cbb0@pci0:4:4:0:        class=3D0x060700 card=3D0x03411462 chip=3D0x7134121=
7 rev=3D0x21 hdr=3D0x02
    vendor     =3D 'O2 Micro Inc'
    device     =3D 'MemoryCardBus Controller 6-in-1 (OZ711MP1/MS1)'
    class      =3D bridge
    subclass   =3D PCI-CardBus
none2@pci0:4:4:2:       class=3D0x080500 card=3D0x03411462 chip=3D0x7120121=
7 rev=3D0x01 hdr=3D0x00
    vendor     =3D 'O2 Micro Inc'
    device     =3D 'O2Micro Integrated MMC/SD controller (Unknown device)'
    class      =3D base peripheral
    subclass   =3D SD host controller
none3@pci0:4:4:3:       class=3D0x068000 card=3D0x03411462 chip=3D0x7130121=
7 rev=3D0x01 hdr=3D0x00
    vendor     =3D 'O2 Micro Inc'
    device     =3D 'Integrated MMC/SD/MS/xD/SM Controller (OZ711M3)'
    class      =3D bridge
fwohci0@pci0:4:4:4:     class=3D0x0c0010 card=3D0x00f71217 chip=3D0x00f7121=
7 rev=3D0x02 hdr=3D0x00
    vendor     =3D 'O2 Micro Inc'
    device     =3D '1394 Open Host Controller Interface (0x00f71217)'
    class      =3D serial bus
    subclass   =3D FireWire
xl0@pci0:5:0:0: class=3D0x020000 card=3D0x5c5710b7 chip=3D0x525710b7 rev=3D=
0x10 hdr=3D0x00
    vendor     =3D '3COM Corp, Networking Division'
    device     =3D 'Cyclone Fast Ethernet CardBus PC Card (3CCFE575CT)'
    class      =3D network
    subclass   =3D ethernet

    Sun May 30 15:30:03 MSD 2010
May 30 16:51:56 localhost reboot: rebooted by root
May 30 16:51:56 localhost syslogd: exiting on signal 15
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...4 3 2 0 1 0 0 done
All buffers synced.
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-RELEASE #0: Sat Nov 21 15:48:17 UTC 2009
    root@almeida.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Genuine Intel(R) CPU           T2250  @ 1.73GHz (1733.41-MHz 686-class=
 CPU)
  Origin =3D "GenuineIntel"  Id =3D 0x6e8  Stepping =3D 8
  Features=3D0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG=
E,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=3D0xc189<SSE3,MON,EST,TM2,xTPR,PDCM>
  AMD Features=3D0x100000<NX>
  TSC: P-state invariant
real memory  =3D 1073741824 (1024 MB)
avail memory =3D 1027956736 (980 MB)
ACPI APIC Table: <LGE    OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <LGE LGPC> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 3f700000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x19> port 0x62,0x66 on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acp=
i0
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xcc00-0xcc07 mem 0xfe080000-0xfe0ff=
fff,0xd0000000-0xdfffffff,0xfe040000-0xfe07ffff irq 16 at device 2.0 on pci0
agp0: <Intel 82945GM (945GM GMCH) SVGA controller> on vgapci0
agp0: detected 7932k stolen memory
agp0: aperture size is 256M
vgapci1: <VGA-compatible display> at device 2.1 on pci0
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
re0: <RealTek 8168/8168B/8168C/8168CP/8168D/8168DP/8111B/8111C/8111CP/8111D=
P PCIe Gigabit Ethernet> port 0xd800-0xd8ff mem 0xfe1ff000-0xfe1fffff irq 1=
7 at device 0.0 on pci2
re0: Using 1 MSI messages
re0: Chip rev. 0x38000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000ba=
seT-FDX, auto
re0: Ethernet address: 00:16:17:54:3e:ba
re0: [FILTER]
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3: <network> at device 0.0 (no driver attached)
uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0xc880-0xc89f irq 23=
 at device 29.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup =3D 0x0f30
usbus0: <Intel 82801G (ICH7) USB controller USB-A> on uhci0
uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0xc800-0xc81f irq 19=
 at device 29.1 on pci0
uhci1: [ITHREAD]
uhci1: LegSup =3D 0x0f30
usbus1: <Intel 82801G (ICH7) USB controller USB-B> on uhci1
uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0xc480-0xc49f irq 18=
 at device 29.2 on pci0
uhci2: [ITHREAD]
uhci2: LegSup =3D 0x0f30
usbus2: <Intel 82801G (ICH7) USB controller USB-C> on uhci2
uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0xc400-0xc41f irq 16=
 at device 29.3 on pci0
uhci3: [ITHREAD]
uhci3: LegSup =3D 0x0f30
usbus3: <Intel 82801G (ICH7) USB controller USB-D> on uhci3
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfe037c00-0xfe037ff=
f irq 23 at device 29.7 on pci0
ehci0: [ITHREAD]
usbus4: EHCI version 1.0
usbus4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib4
cbb0: <PCI-CardBus Bridge> irq 16 at device 4.0 on pci4
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [FILTER]
pci4: <base peripheral, SD host controller> at device 4.2 (no driver attach=
ed)
pci4: <bridge> at device 4.3 (no driver attached)
fwohci0: <1394 Open Host Controller Interface> mem 0xfe3fd000-0xfe3fdfff,0x=
fe3ff000-0xfe3ff7ff irq 16 at device 4.4 on pci4
fwohci0: [ITHREAD]
fwohci0: OHCI version 1.10 (ROM=3D0)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 00:dc:10:00:b6:df:18:01
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x1090000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:dc:10:df:18:01
fwe0: Ethernet address: 02:dc:10:df:18:01
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:dc:10:00:b6:df:18:01 @ 0xfffe00000000, S400, ma=
xrec 2048
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=3D0x00000000, SelfID Count=3D1, CYCLEMAS=
TER mode
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7M SATA150 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x17=
7,0x376,0xffa0-0xffaf at device 31.2 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
ichsmb0: <Intel 82801GB (ICH7) SMBus controller> port 0x400-0x41f irq 19 at=
 device 31.3 on pci0
ichsmb0: [ITHREAD]
smbus0: <System Management Bus> on ichsmb0
acpi_button0: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button1: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6130d2c06000d2c
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
ACPI Warning: Incorrect checksum in table [SSDT] - F0, should be 74 2009052=
1 tbutils-275
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xce800-0xcf7ff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: parallel port not found.
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <=3D 0 cable IRM irm(0)  (me)
firewire0: bus manager 0
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ad0: 95396MB <HTS541010G9SA00 MBZOC60R> at ata0-master SATA150
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
cardbus0: CIS pointer is 0x90
cardbus0: CIS in PCI config space
cardbus0: CIS pointer is 0x90
cardbus0: CIS in PCI config space
TUPLE: LINKTARGET [3]: 43 49 53
Manufacturer ID: 01015752
TUPLE: Unknown(0x04) [6]: 03 01 00 00 00 00
TUPLE: Unknown(0x05) [13]: 41 9a 01 b5 1e 01 35 1e 02 30 7f ff 01
Product version: 5.0
Product name: 3Com Corporation | 3CCFE575CT | LAN Cardbus Card | 004 | \^?
Functions: Network Adaptor, Memory
CIS reading done
xl0: <3Com 3c575C Fast Etherlink XL> port 0x1000-0x107f mem 0x80001000-0x80=
00107f,0x80002000-0x8000207f irq 16 at device 0.0 on cardbus0
xl0: command never completed!
xl0: command never completed!
xl0: eeprom failed to come ready
xl0: failed to read station address
device_attach: xl0 attach returned 6
acd0: DVDR <HL-DT-ST DVDRAM GSA-T10N/PA02> at ata1-slave UDMA33
SMP: AP CPU #1 Launched!
Root mount waiting for: usbus4 usbus3 usbus2 usbus1 usbus0
uhub0: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
Root mount waiting for: usbus4
Root mount waiting for: usbus4
Root mount waiting for: usbus4
uhub4: 8 ports with 8 removable, self powered
Trying to mount root from ufs:/dev/ad0s1a
Setting hostuuid: ac16f336-ebae-db11-8000-504350524f44.
Setting hostid: 0x5bbe8e28.
Entropy harvesting:
 interrupts
 ethernet
 point_to_point
 kickstart
.
Starting file system checks:
/dev/ad0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1a: clean, 94485 free (6621 frags, 10983 blocks, 2.6% fragmentatio=
n)
/dev/ad0s1e: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1e: clean, 251250 free (146 frags, 31388 blocks, 0.1% fragmentatio=
n)
/dev/ad0s1f: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1f: clean, 41708989 free (95581 frags, 5201676 blocks, 0.2% fragme=
ntation)
/dev/ad0s1d: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1d: clean, 955424 free (760 frags, 119333 blocks, 0.1% fragmentati=
on)
Mounting local file systems:
.
Setting hostname: localhost
.
Starting Network: lo0 re0.
lo0: flags=3D8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
        options=3D3<RXCSUM,TXCSUM>
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
re0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=3D389b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WO=
L_UCAST,WOL_MCAST,WOL_MAGIC>
        ether 00:16:17:54:3e:ba
        media: Ethernet autoselect (none)
        status: no carrier
route:
writing to routing socket
:
Network is unreachable
add net default: gateway 192.168.1.1: Network is unreachable
Additional routing options:
 IP gateway=3DYES
.
Starting devd.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/=
lib/dovecot /usr/local/lib/dovecot/imap /usr/local/lib/dovecot/lda /usr/loc=
al/lib/dovecot/pop3 /usr/local/lib/gcc/i386-portbld-freebsd8.0/3.4.6 /usr/l=
ocal/lib/gcc43 /usr/local/lib/mysql /usr/local/lib/pth
a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout
Creating and/or trimming log files
.
Starting syslogd.
re0: link state changed to UP
re0: link state changed to DOWN
Starting named.
Clearing /tmp (X related).
Starting mpd5.
Updating motd:
.
WARNING: attempt to domain_add(netgraph) after domainfinalize()
Starting ntpd.
Starting proftpd.
re0: link state changed to UP
Removing stale Samba tdb files:
.
.
.
.
.
.
.
.
 done
Starting nmbd.
re0: link state changed to DOWN
Starting smbd.
Starting webmin.
Starting Webmin server in /usr/local/lib/webmin-1.510
re0: link state changed to UP
Pre-loaded WebminCore
/etc/rc: WARNING: run_rc_command: cannot run /usr/local/etc/usermin/start
Starting mysql.
postfix/postfix-script: starting the Postfix mail system
Error: ssl_cert_file: Can't use /etc/ssl/certs/dovecot.pem: No such file or=
 directory
Fatal: Invalid configuration in /usr/local/etc/dovecot.conf
Error: ssl_cert_file: Can't use /etc/ssl/certs/dovecot.pem: No such file or=
 directory
Fatal: Invalid configuration in /usr/local/etc/dovecot.conf
Error: ssl_cert_file: Can't use /etc/ssl/certs/dovecot.pem: No such file or=
 directory
Fatal: Invalid configuration in /usr/local/etc/dovecot.conf
usage: install [-bCcpSsv] [-B suffix] [-f flags] [-g group] [-m mode]
               [-o owner] file1 file2
       install [-bCcpSsv] [-B suffix] [-f flags] [-g group] [-m mode]
               [-o owner] file1 ... fileN directory
       install -d [-v] [-g group] [-m mode] [-o owner] directory ...
install:
-m
:
Invalid argument
/etc/rc: WARNING: failed precmd routine for dovecot
Performing sanity check on apache22 configuration:
Syntax OK
Starting apache22.
Configuring syscons:
 keymap
 font8x16
 font8x14
 font8x8
 blanktime
.
Starting sshd.
Starting cron.
Starting background file system checks in 60 seconds.

Sun May 30 16:52:58 MSD 2010





Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1773876190.20100530171113>