Date: Mon, 21 Dec 2015 18:27:51 +0000 (UTC) From: Warner Losh <imp@FreeBSD.org> To: src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-head@freebsd.org Subject: svn commit: r292557 - head/sys/arm/conf Message-ID: <201512211827.tBLIRpLf053739@repo.freebsd.org>
next in thread | raw e-mail | index | archive | help
Author: imp Date: Mon Dec 21 18:27:51 2015 New Revision: 292557 URL: https://svnweb.freebsd.org/changeset/base/292557 Log: Configure the Atmel eval boards to boot the same way. This gives them the same layout as other embedded systems. Modified: head/sys/arm/conf/SAM9260EK head/sys/arm/conf/SAM9G20EK Modified: head/sys/arm/conf/SAM9260EK ============================================================================== --- head/sys/arm/conf/SAM9260EK Mon Dec 21 18:19:14 2015 (r292556) +++ head/sys/arm/conf/SAM9260EK Mon Dec 21 18:27:51 2015 (r292557) @@ -103,8 +103,10 @@ options PRINTF_BUFR_SIZE=128 # Prevent #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=macb0 -# alternatively, boot from a MMC/SD memory card -# s1 is FAT on this platform. +# s3 because s1 is reserved for the DOS parittions sometimes needed to +# boot off SD cards on the G20 and newer chips. s2 is reserved for +# nanobsd's config partition. s3 and s4 are for the ping-pong upgrade +# path. 9260 doesn't boot off SD, but let's keep things sane. options ROOTDEVNAME=\"ufs:/dev/mmcsd0s3a\" # Alternatively, boot from a USB card. Modified: head/sys/arm/conf/SAM9G20EK ============================================================================== --- head/sys/arm/conf/SAM9G20EK Mon Dec 21 18:19:14 2015 (r292556) +++ head/sys/arm/conf/SAM9G20EK Mon Dec 21 18:27:51 2015 (r292557) @@ -82,9 +82,11 @@ options DDB # Enable the kernel debug #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ate0 -# s2 because s1 is reserved for the DOS parittions sometimes needed to -# boot off SD cards on the G20 and newer chips. -options ROOTDEVNAME=\"ufs:/dev/mmcsd0s2a\" +# s3 because s1 is reserved for the DOS parittions sometimes needed to +# boot off SD cards on the G20 and newer chips. s2 is reserved for +# nanobsd's config partition. s3 and s4 are for the ping-pong upgrade +# path. +options ROOTDEVNAME=\"ufs:/dev/mmcsd0s3a\" # kernel/memory size reduction options MUTEX_NOINLINE
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201512211827.tBLIRpLf053739>