Date: Mon, 24 Oct 2011 10:42:50 +0200 From: Franz Schwartau <franz@electromail.org> To: Hans Petter Selasky <hselasky@c2i.net> Cc: freebsd-usb@freebsd.org Subject: Re: Sharkoon QuickPort XT USB3.0 at full speed only Message-ID: <4EA5250A.2050801@electromail.org> In-Reply-To: <201110240919.08150.hselasky@c2i.net> References: <4EA1D70D.3010909@electromail.org> <201110240833.45586.hselasky@c2i.net> <4EA50EBD.7020105@electromail.org> <201110240919.08150.hselasky@c2i.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi Hans! On 24.10.2011 09:19, Hans Petter Selasky wrote: > On Monday 24 October 2011 09:07:41 Franz Schwartau wrote: >> Maybe my "attached" was misleading. The port I attached the QuickPort >> docking station is capable of high speed in regard of the hardware. But >> FreeBSD attaches the device to an OHCI instead of an EHCI. Of course I >> tried different ports and cables. > > Hi, > > High speed mode requires some additional signalling called High Speed chirp. > If this fails, FULL speed is the default fallback mode. Does other devices > besides from the HUB work in High Speed mode? Have you tried other HUB brands? There is no extra USB hub (in the sense of an extra device). The QuickPort is directly connected to the USB ports of the motherboard. I tried four different ports. At least two of them are capable of high speed. The Sharkoon RapidCase (External HDD DMI) and an USB memory stick (Flash Voyager Corsair) are set to high speed: ugen0.1: <OHCI root HUB ATI> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE ugen1.1: <OHCI root HUB ATI> at usbus1, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE ugen2.1: <EHCI root HUB ATI> at usbus2, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE ugen3.1: <OHCI root HUB ATI> at usbus3, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE ugen4.1: <OHCI root HUB ATI> at usbus4, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE ugen5.1: <EHCI root HUB ATI> at usbus5, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE ugen6.1: <OHCI root HUB ATI> at usbus6, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE ugen2.2: <Flash Voyager Corsair> at usbus2, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON ugen2.3: <External HDD DMI> at usbus2, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON ugen1.2: <product 0x2490 vendor 0x04fa> at usbus1, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON But if I connect the QuickPort it is set to full speed no matter which port or which cable I'm using... And to repeat it: Other OS set the QuickPort to high speed with the _same_ hardware setup. Best regards Franz
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4EA5250A.2050801>